I have found a curtain pattern in The Treasure Chest of Swedish Weaving (Honeycomb Draw Curtains, pp. 12-13), sett 1 end/dent in a 12 dent reed.  Part of the charm of the pattern is that for the most part the honeycomb feature threads are placed singly like waves, rather than creating cells.  The suggested warp yarn (Nordiska Tweedy) is not identified as cotton, cottolin, linen or wool, and I could not find any information about it on the internet.  I calculated that the pattern calls for a warp yarn at 6,667 m/kg.  The following yarns seem to fill the bill as far as weight is concerned:

1.  8/2 pearl cotton or unmercerized cotton (6,775 m/kg), ordinarily sett at 16 for plain weave; or 

2.  22/2 cottolin (6,390 m/kg), ordinarily sett at 15 for plain weave.

The sett called for is so loose that I am concerned that the weft threads will droop as the curtains hang.  For the feature threads, wool is called for and should help stabilize the weft.  However the great majority of the weft will be same as the warp, woven in plain weave and beaten square (12/inch).

Will one of these warp choices be more likely to hold the weight of the weft without slippage?  Thanks in advance for any advice you can give.

Karen

Comments

Sara von Tresckow

There is another option to keep the weft from drooping - that is to place small bands of warp sett more closely than the rest. This stabilizes the fabric and when well planned is a nice design feature.

sandra.eberhar…

I think that perle cotton is pretty slick, and your worries about the weft falling when hung are valid.  I would use a warp with more "tooth", tow linen or unmercerized cotton.  One other thing to consider, if you don't intend to line the curtains, cotton is the most succeptable to sun rot.

Karen6

I can visualize little lines of more closely set warps running down the centers of the two "bumps" all the way across.  I think that would look very nice, almost like stems.  Would the cottolin have more tooth than the unmercerized cotton?  I am not so concerned about fading and rot, since that little bathroom only has the one narrow window and it faces north.  I clearly need to do some sampling.  Thanks to all of you!

Dakota

Karen, If fire is an issue, try to find Trevira polyester. This is what is used in commercial interior applications such as hospitals and care facilites for window coverings (drapes). While not identified as Trevira, Coats makes several weights (30 and 75 Tex) of polyester, as does Gutermann (40 and 100 Tex), as does Maxi-Lock (27 Tex). These are available through Cleaners Supply - 1 800 568 7768, a company used by tailors and dressmaking shops. I believe Trevira was developed by Dupont, which may be a starting place for a search. Dakota

laurafry

My roman shades in a west facing window were installed in the late 80's and are still fine. A bit of sun fading but not terrible. Made from 2/8 cotton woven in a stitched double weave they do a good job of blocking out the afternoon sun. Cottolin does have more tooth, usually, and linen has the highest rating for resistance to sun degradation. Cheers Laura

ReedGuy

Mom has cotton covered pillows on the couch in her sun room (a gazebo style room) and the color fades pretty quick on those pillows. The couch has been there about 12 years now, the original cotton coverings is replaced by another which is now fading. This is why many folks pull the shades or curtain in sunny rooms, the cotton rots and fades in this modern stuff. I have older pieces in my house made of linen and wool mixed fabric and these coverings are 40 years old and not falling apart or rotten or faded. Just my observations. :)

Karen6

It looks like cottolin is the best choice for me for this project.  I haven't been weaving long enough to dare warping full-on linen yet.  The existing curtain is undetermined fiber, came with the house, but it has lasted 25 years in that dim little bathroom.  Thanks to all of you for your suggestions.  I'll do my sampling with a cottolin warp and have some fun with sett and weft fiber.

ReedGuy

In my previous post I ment to say linen and wool blend, the patterning was with wool and the ground cloth linen.

Dakota

ReedGuy, Do you know at what stage the color was applied in your mother's pillows that are fading? There are various methods for dying: a. Before the fiber is processed to yarn ("dyed in the wool"); b. Dyed after spun into yarn before coning or skeining; c. Piece dyed after the yarn is woven or knitted to fabric; and d. Applied, as in print making or Ikat weaving. And then there is the issue of the technical light fastness of the dye stuff. Have you any idea what dye was used and who was its manufacturer? Dakota

Dakota

I meant to add, before I got interrupted here, that the dye is more accessible to the fiber while dyed "in fiber form" than in any of the other methods. With the applied method, the pigment can be resisted by chemicals in the undyed cloth, therefore it is often the least color fast. Also, I have and treasure a sample of a 100% wool casement woven by Jack Lenor Larsen (now deceased). It is very light weight, almost gauze. Certainly wool is noted for its ability to retain its color, which may explain its use in some window coverings. Wool has the advantage for use in this application because it does not support a flame. Much of Larsen fabric was used in commercial applications. This sample is also mothproofed, probably done during the dyebath. I suspect Ciba Gigy's Mitin F Concentrate was the product used; it was a colorless dye. In those days it was the standard for mothproofing throughout "the industry" and craft world for protein-fibered yarn and cloth. Dakota

ReedGuy

No idea really. She bought the material in the Curtain Store in Bangor, Maine and a friend helped her make the second pillows. The original covers probably had some info on their tags, but are gone now I imagine. I would guess b). and they are not print died.

Sara von Tresckow

I/ve made 2 pair of curtains in recent years - a fine cotton in the warp and a very fine worsted wool in the weft. They are lightweight, let some light through, and keep Wisconsin winter drafts out.

The pair with the most color has the cotton warp to the room side (3/1 twill) and the white wool to the outside - in a south facing window. Fabric is wearing beautifully. Both pair have the little stripes of extra density and hang well.

Karen6

Thanks to each one of you for your perspectives on curtain fibers.  This has really been helpful to me.  Using variations in sett to retard drooping.  We actually do use candles in the room sometimes, so flameproofing is a factor.  And moth proofing if I use wool.  The virtue of wool to resist fading.  The 3/1 twill, with the wool weft side toward the light to retard fading.  So glad I asked, and so glad you answered!  Thanks!

Karen

Submitted by Karen6 on