When I bought my 120cm Gimakra Standard, it came came with a 10 shaft horizontal countermarche, a standard counterbalance set-up, plus damask pulleys. What I'm wondering is, could you set the loom up with both CM and CB gubbins and use the CB for tabby and the CM for pattern shafts, enabling one to weave some small drawloom patterns? I know I can do straight opphamta/upphamta with a weaving sword on the CM, but I'd kind of like to weave something not so rigorously geometric. Do you think this is feasible and has any one tried it?

Comments

SallyE (not verified)

I'm not sure why you would do that.   You could just use the 10 shafts in CM mode, using 2 for tabby (same color as warp) and the rest for a pattern (different color, maybe a thicker yarn).   That is basically what an overshot is.   You can get some very nice geometric patterns doing overshot.

Technically, a drawloom is an arrangement where each thread goes through two (or more) heddles, one on the CM or CB shafts and one on the pattern shafts.   So the CM or CB pulls the thread down and the pattern shaft pulls certain ones back up.   This requires some depth to the loom or you will over stress those threads.   So doing these two things closely together won't really work.   The mechanism by which you create the shed is beside the point.

 

Erica

I don't knwo about your proposal. I know Myrhed in Sweden makes a lovely drawloom attachment, here is <a href="http://myrehed.se/9.html"> their site</a>.

I know for my drawloom I use two different heddle types, both are different from the heddle size you use for standard weaving. One set has a really large eye.

If you try it let us know!

cottageweaver (not verified)

You can set up your loom to weave Smålandsväv (or treadled opphamta) without a drawloom attachment.  This is a two-harness weave, but accomplished with pattern shafts toward the front of the loom, and ground shafts moved toward the back.  I drilled holes in my center treadles for this purpose, but you can also jerryrig the tie up so you don't have to drill (using rubber bands or something similar). I think it's easier to weave than damask using a weaving sword, and you can weave some beautiful designs. You'll need some long-eyed heddles.  See Damask and Opphämta by Lillemor Johansson.  There's a whole chapter on this method.

Jeannie (not verified)

Thanks for the responses, everyone. I've got the long-eye heddles already, so that is one step closer to my goal. I think I will try Smalandsvav first and keep saving up for the drawloom attachment. (And buying lottery tickets!)

Erica J

I think the drawloom attachment is the way to go. Checkout tge Drawloom group. One member built her own attachment!

Submitted by Anonymous (not verified) on