Anyone have good advice of what to use to restore metal parts / rust in restoration?
What works / doesn't work?

Comments

Claudia Segal (not verified)

If the rust is on the reed, it's nearly impossible to get that off and restore the reed to working order. As for other parts, it depends which sections are rusted and how badly. can you provide a couple of pictures of where the rust is on the loom? Claudia

CedarHillWovens

Thanks Claudia.......pictures will be forth coming once I get the loom home. I've put money down to hold it and will be picking it up in the next couple of weeks. It is a pretty sound and very heavy loom, well taken care of. It has been sitting for a few years covered in the gals basement, thus the rust. She was ordered by doctor to never weave again because of having 6 vertebrae fused and she's lost the motion one needs to weave with.
I'll be the third owner. It's coming with the original books and shuttles, wood temple. It's not missing any parts that I can recall. The heddles / reed do have some rust but not bad. Would like advice as to whether vinegar is a good way to go to clean or is there another product that others have had good results with. 
I had a friend recommend a rust remover that is non toxic / biodegradeble that mechanics use to remove rust from car parts.....I just had a look at her heddles and reed the other day and must say I was not impressed. 
I saw at Great Northern Weaving you can purchase heddles for the Union so thats an option for new ones.

Thanks!!! 

kfsuko (not verified)

If you want to share, I'd love to know how much you paid for your Union 36" loom.  I have one - also with rusted heddles - and have wondered the value of it. 

I've heard of soaking the reed in oil.  Or was it petroleum jelly?  Check out the yahoo rugweavers group -

Thanks,

Kate

CedarHillWovens

I am so sorry, I did not see you question until today. Been away from things on here @ weavolution for a while, but getting back into the swing of things.

No, I don't mind sharing how much we paid. The gal asked $500. (actually had originally asked $800. and wasn't getting any bites on it). We looked at it in her basement and it seemed to be pretty sound with little rust to deal with. We talked her down in price, though not much ($475.), she would not budge much. I've seen prices at this range, some higher, some lower, but never anywhere with in a decent driving distance to check out and in all conditions. I personally feel we got ripped off on price overall once we got the loom home and saw it in better light. The wood finish wasn't just going to need a good cleaning up and the rust was much worse. Plus when we got back to pick it up her husband had done wood working near it and left it covered in sawdust of which they did not even bother clean off.

Once home I assessed the whole loom more closely. Let me say this the loom is in solid condition but needed more TLC than expected.  I am currently in full restoration mode of the loom. All the wood has been stripped down, will get new stain / lacquer finish. Heddles were so bad they did not clean up well at all by 2 different cleaning methods and over all I didn't like the type they were. So we are ordering stainless heddles from http://www.greatnorthernweaving.com/equip_heddles.asp or buy at my local yarn / weavers shop. The reed is also being replaced with a stainless reed, purchasing either at same link or store I mentioned. My husband is also going to replace the treadle chains / harness chains with same type because originals are so rusted would be impossible to get all the rust off.
So if your loom is in really good condition, very little issues, I would think the value price could easily be in the $500. range or more. Though I am not really sure on that. I do know this that the Union 36 is a smooth running work horse of a loom. I am currently weaving on one at a Museum in town.

Submitted by CedarHillWovens on