I am a newer weaver - warping f/b,  Working with 8/2 cotton, black, 2 threads to a dent.  Did all I was supposed to do with warp on the board - tied cross in 4 places, tied very tight choke- slayed the reed, threaded headles - however, I have a tangled mess from the choke tie to the reed - cannot figure out how it happened, thought it would straighten out, but of course it didn't.  Took forever to sley and thread, due to the dark thread.  Any hope or should I just chuck it.

Thanks

Irene 

Comments

ReedGuy

I do the same as yourself with the tape, but I make a cross with a piece of yarn while winding each section. Then when done I add the sticks and secure to the beam. The twisting part is what this suppresses. Yes, it will still twist, but the cross ensures that that twist is at the lease sticks and not back somewhere out of site on the back side of the roller that you cannot see when threading from behind the harnass. Keep in mind I am inside my loom and not standing back of the loom. I also do not use tie on strings with groups of warp. I don't like that method. ;) I tie right onto a dowel rod which is secured to hooks while warping. When I have woven down to the dowel rod, the rod comes off the hooks and is held by cords which are always on the dowel rod from the beginning but taped to the roller for storage. Here, I am at that stage. Something different. :) I now have removed the lease sticks because the rod is beyond the back beam.

I don't have a good photo of my yarn to hold the cross. But I think you can find it used by Joanne Hall on her loom site where they talk of sectionals for their looms. She also uses the tape on the warp ends. :)

 

 

ReedGuy

Here's the photo of the lease cross yarn in place as I tape the sections.

NancyHassel

Yarns with a bit of twist will seem smooth and untangled when you finish a step (e.g., warping board, bringing through heddles, etc) but after a day without being tensioned the individual threads seem to tangle with their neighbors. It really helps to thread from a cross through the lease sticks because you can untangle by putting tension on a group of threads (10 to 20) on each side of the lease sticks then sliding them back into order along the lease sticks. (Hope I'm articulating this well enough).

LeeA (not verified)

A really excelent video on warping from the founder of WEBS Yarn store.  Barbara Elkins shows you very clearly how to use the lease sticks.  Note this method is for warping back to front.  http://www.youtube.com/watch?v=icw_E0rHYBw

igaff (not verified)

Hi All,

I so appreciate all your help.  I did cut off the warp, I really had many errors, not just tangled yarn.

I have started to redo - I am warping in sections about 50 threads at a time, remembered how I had tied my lease sticks on the loom.  I am really very happy - I can just about see a shed just by looking at the space between the lease sticks and the read.  Another good learning experience for me.

I am still warping front to back, 8/2 yarn and lease sticks.

 

sally orgren

Your comment about seeing the shed at the lease sticks is a perfect indicator of good technique, and a great future weaver. 

igaff (not verified)

Thanks Sally,  I am pleased so far - good technique?  Not getting carrie away - LOL.  Baby steps for now.

Irene

sally orgren

but I have noticed that new weavers who pay attention to how things are happening when warping and ask the "why" questions tend to get up to speed with their warping method more quickly. So that is why I think you are well on your way!

beachweaver

This thread is old, but hopefully not abandoned.  I've warped sectionally for a long time, but now am trying to do it with thinner yarns and a high epi.  I've always used the "tape" method and maintained the thread order from the tape.  Never had a problem.  However, with a high epi, I'm thinking I need to maintain the cross.  I've read ReedGuy's description and seen the pictures, but have a couple of questions.  There appears to be only one string in the picture.  How can the cross be maintained with only one string?  Also, how can you get all those taped ends  to the heddles if you don't have a cradle (as ReedGuy apparently does) to bring the heddles to the back of the loom.  The tape does't seem to have enough staying power to, say, thread a lease stick in there and use that to pull the width of warp to the front.  So, I guess my general question is can somebody offer some help on how to maintain the cross in sectional weaving (using the tape method or any other method) and get the threads to the heddles for back to front warping.  Thanks very much!

NancyHassel

I have been using an AVL Tension Box for many years.  It has a crossmaker.  A google search will bring up lots of pictures.

Submitted by Anonymous (not verified) on