I'm about to start the silk sample for the christening gown (which may be abandoned as my niece moved up the event from March to January!).  I've spread out the plain weave over 6 shafts.  I've estimated that the sett will be 100 epi and will be 24" wide at the reed..  At that sett, even with the plain weave spread, I need about 300 heddles on each of these 6 shafts.  I'm weaving this on the AVL WDL 24/24.

Has anyone tried 100 texsolve heddles per inch? What issueds did you encounter.  I'm concerned about 2 things, getting the heddles that close together, and the shafts grabbing each other given how close they are.

Would love to hear about any of your experiences and suggestions you' have.

Thanks!

Comments

tien (not verified)

On 24 shafts, straight draw, I had absolutely no problem at 96 epi.  I would spread the plainweave out onto all 24 shafts, it will space out the heddles much better than if you're only using 6 shafts.  On 24 shafts it's only 4 heddles/inch on any given shaft, which is practically nothing.  On 6 shafts it's 16 heddles/inch on any given shaft, which I'm guessing shouldn't be a significant problem, but why not spread them out?  Straight draw is easy enough.

That said, 100 epi plainweave sounds high, if you're using the 120/2 silk that I think you are.  I sett at 96 epi in a 4-shaft twill equivalent structure (sett-wise), and that turned out to be fine.  For plainweave I think it would be too close a sett.  Try it at 70-80?

I have not had trouble with shafts grabbing each other, except when a heddle at the end gets tangled on a neighboring shaft.  That rarely happens since I learned not to crowd them densely together at the end of a shaft.  :-)

Tien

Alison (not verified)

Hi Tien,

I can't spread out over 24 shafts because the remaining 18 shafts are pattern.

I forgot that your 70-80 was on 120/2.  For some reason I thought it was using the 60/2.  The Treenway sett chart shows 120 epi for 120/2 silk.  Since the pattern is 3 end huck, so I didn't want it quite so firm.  I figured I might choose to go denser as I sampled.

Thanks for the input.  Luckily the first silk sample is only 300 ends, so I'll have lots of room to move about.  I can start wider and move in.  Now to order yet more heddles...

tien (not verified)

No, for my 120/2 sample I sett at 96 epi in twill, which worked pretty well.  60 and 72 epi samples were both with 60/2 silk, and worked well with 60/2.  I'm curious why Treenway suggests setting so densely - let me know what results from your experiments!

You do realize that a sample only 3" wide will not tell you what the final piece will be like, right?  It's easier to get a clean shed with a narrow sample and you can beat in the narrow sample much harder than you would be able to on a wider piece.  i got myself into trouble with the 96 epi sample in 60/2 silk because I had done a 4" sample, had no problems, and didn't realize that on a wider piece such a dense sett would create problems.  The wider piece also had far fewer picks per inch, because you can't beat as hard on a wide piece as on a narrow piece.

If you're just looking at the pattern, great (though the aspect ratio may change), but be aware that the full-width piece is goiing to  behave differently from a narrow sample.  I found that out the hard way....!

Tien

Alison (not verified)

You just gave me an idea.  I may be able to effectively spread out the six shafts of plain weave out further by interspersing them among the pattern shafts.  Then I won't have so many heddles together on those six shafts.  I'll get a better shed if I keep them closer to the front, but a pattern shaft between them may really help keep them from disturbing each other.

I've been pretty worried about the final shed with this when it is full width.  I haven't decided yet to wind a wider sample next or go straight to it and sample on the full width. 

Too bad you had to learn the hard way!  Hopefully others will learn from all of our collected posted mis-steps!

 

lkautio (not verified)

I've done 5 and 7 end huck  (which take a firmer sett than the 3 end) with 140/2 silk.  90 epi was nice for balanced effects in a soft fabric.  Your 100 would probably weave fine, but be stiff - good for a crispy fabric, but a pattern that is more textured than openly lace.  With 3 end blocks you might well be able to go down to 75-80 epi and have a more drapeable, lacy effect.  For my larger blocks and slightly finer thread at 75-80 epi a heavier pattern weft was needed for a stable fabric.

If you are worried about the final shed at full width, you can put the tie-downs on the back shafts where the loom pulls them apart further.  That allows you to see the pattern shafts better. 

Are you using 6S for tie-downs just to spread them out more? Or will you be using the extra design capacity (just curious!)?1P1, 2P2, 3P3, 4P4, 5P5, 6P6 spreads them out well as would 1P3, 2P4, 5P3, 6P4, or (with different tie-up) 1P2, 3P4, 5P6, 3P4 etc

Laurie Autio

Submitted by Anonymous (not verified) on