I have several scarves that I just took off the loom and need to be wet finished. They are 100% rayon (something close to a 5/2...Yarn was from Webs and it's called 6 Ply Rayon) and I was thinking I would probably machine wash them (delicate, with mild detergent...Joy dish soap) and then either let them hang to dry or tumble dry on low until just damp and then iron them dry. Other suggestions here are welcome.

I probably shouldn't have done this, but it's done now, so I have to live with it. I cut the scarves apart (3 of them) and twisted the fringe before washing them. Generally I zigzag stitch the parts between fringes so they don't unravel and then wash them, cut them apart and finish the fringe. But for some reason, I went ahead and cut them before hand. Can I still wash them as I would have before? Will my twisted fringe unravel?
And for future reference: When you twist fringe, should you do a hemstitch to keep the yarns from unraveling or do you just do the twisted fringe?

 

On a completely unrelated note and for a completely different project: can you weave overshot using the same size yarn as the warp for the pattern weft? I suppose I could answer my own question by sampling, but I don't have that warp on the loom yet so I thought I'd ask here first. I feel like such a newbie asking all these questions!! :(

Any help would be appreciated,
JoAnna

 

 

Comments

laurafry

Hi Joanna,

I always fringe twist before wet finishing.  If you've tied secure knots at the end of the fringes, you should have no difficulty with the fringes coming apart.  I find that a twisted fringe really doesn't misbehave during wet finishing.  :)

You can use the same grist for the pattern overshot, but the pattern will not 'read' the same as a thicker yarn.  Do a little sampling before you start your project and try several different pattern weft yarns.

Cheers,

Laura

debmcclintock

 I know you will get a lot of good advice on your fringe.  You might also want to check out our scarf fringe forum for other finishing ideas also.  Here is the link:

http://www.weavolution.com/forum/weaving/several-questions-about-fringe

I created that forum to use it for a clearing house for scarf finish type items from all the forums and within that forum.

On that note do you mind if I put a link to your question in our forum so folks can see some of the solutions that folks offer?  

Regards

Deb

 

lkautio (not verified)

The 6-ply rayon makes nice scarves.  Your twisted and securely tied fringes should be fine after washing on gentle.  You can hemstitch or not before twisting, as you please.  If you don't hemstitch, there is a little trick that makes the woven edge more solid.  Exchange the last thread of one fringe group with the first thread of the next as you twist and you won't get the ugly "gaposis" that sometimes occurs.

For the overshot, yes, you can weave with the same size, and even with one shuttle.  The results are different, though. Don't expect it to cover the warp as fully, with very solid looking pattern blocks.  The tabby will probably be visible between the pattern picks in the pattern areas, and the pattern picks may look stringy (separated and thin). You will likely need more picks to square the blocks if you weave with the size of the warp yarn, but it depends on sett and other factors.  Two or three inches of sampling should be enough to tell you if you need to increase the number of picks per block. Woven with one shuttle in the same color as the warp (spetsvav fashion) it looks almost lacy.  Another interesting, shadowy effect is had by using a thick tabby and a thin pattern (often a metallic or other very shiny yarn). Traditionally you would use a softer pattern weft that is 2-4X (or more) thicker than the tabby and warp yarns.  For example, 10/4 wool on 10/2 cotton, cotton or rayon floss (like your 6-ply rayon) on 20/2 cotton, etc. would give a more traditional look than using a pattern and tabby of the same size.

Have fun experimenting!

Laurie Autio

 

JoAnnaWeaves (not verified)

Thanks for the link! Please feel free to link this post as well.

JoAnna

JoAnnaWeaves (not verified)

Thanks Laura! I had never tried a twisted fringe and wasn't sure how it would behave. I think I might have the courage to actually wash the scarves now. :)
JoAnna

JoAnnaWeaves (not verified)

Thanks for all the helpful info!! I'm excited to get a warp on the loom and start experimenting now!
Also, I'll remember the fringe twisting tip for next time. Only one of the scarves came out a little gappy, but it's not too bad.
I love the 6 ply rayon! I've used it on several other scarf sets and when it's finished it drapes beautifully!! It feels so stiff before it's washed but it comes out after the wash feeling lovely.
JoAnna

tommye scanlin

 Laurie mentioned several variations on overshot.  Also, if you have access to The Weaving Book, by Helene Bress you'll find many, many, many ways overshot threadings can be varied!  Enough to explore for a lifetime (or a good year, at least!).

Tommye

lkautio (not verified)

Donna Sullivan and Ellen Saltzman also have useful books on overshot.  Seems to me Evelyn Neher (or Mary Snyder?) did as well but I can't find the reference.  I've tried at least 24 variations and most had some value.  Other interesting variations include swivel fashion, honeycomb fashion, on opposites, polychrome, woven as lace, etc.  It could keep you busy for a long time.

Laurie Autio

kerstinfroberg

Overshot: in Sweden, we are told that the "traditional" pattern weft should be the same grist as the warp yarn, but doubled. Most of our books state that two strands of yarn gives better coverage (is that the word?)  than a 2-ply.
FWIW.

Have fun!

Oh - and Laurie - what is "spetsvav fashion"?

Kerstin (in Sweden...)

lkautio (not verified)

Kerstin, as I recall the term is used here to for a treadling that normally takes two shuttles of different weight and color done with one shuttle in same yarn as warp.  That definition may be a little loosey-goosey and probably does not match the original Swedish definition.

As for coverage, I agree.  I have liked up to six fine strands in place of a heavy  pied yarn.  Floss with 6 or more strands running more or less parallel covers a lot better than 3/2 cotton.  If you put your own together you can get much more subtle color work.

Laurie Autio

jenadina (not verified)

JoAnna, would you report back after you wash and let me know if your cone of Cordovan runs? I bought one too and there is a review up now saying that the color bleeds :(  I have lots of stuff I have to finish up before I'll get a chance to sample with it myself.

 

Thanks!

lkautio (not verified)

The cordovan runs.  Be careful using it with vastly different colors.  I made the mistake of using it as a divider thread in a pastel gamp of samples for WGBoston.  Many repeat washings and RIT color remover later, they were semi-usable.  It is nice with similar colors, though.

Laurie Autio

jenadina (not verified)

Thanks, Laurie! It's such a beautiful color; bummer that it isn't colorfast. I'll still use it, but I'll have to change my plans.

Alison (not verified)

Does the yarn run with mulitple washes, or only the first wash or two?  You may be able to reduce or stop the bleeding if you wash the yarn before weaving.

JoAnnaWeaves (not verified)

Hi there!
I have made one scarf with the cordovan and it DOES bleed. I used it as weft and the warp was a yellowish/tan color. It's not extremely obvious, but you might want to take precautions just in case. Isn't there some type of "magic rag" or something you can throw in with a wash that absorbs dye that bleeds? Just throwing that out there. I'm glad I could answer your question! I forgot about the review that said it bled until after I'd washed the scarf. The cordovan doesn't look any lighter, just makes other colors look a bit pink.

JoAnna

laurafry

Yes, they are called Dye Magnets.  I buy them at stores like Wal-Mart or Target, some grocery stores carry them in the laundry area, too.

The big thing about wet finishing a textile with fugitive dyes is to rinse, rinse, rinse - don't let the cloth just sit still in the water soaking up all the fugitive dye molecules and letting them re-distribute in the cloth.

Cheers,

Laura

weaversouth (not verified)

I usually hand-wash my stuff then put it in the washer on "spin" then hang out to air-dry.  As Laura noted, twisting the fringe BEFORE you wash is a must, though, however you wet-finish!

Nancy c.

jenadina (not verified)

And just in case someone is wondering what happens if you *don't* twist first...you get a washing machine FULL of lint and the fringes will tie themselves up in knots. I washed a sample piece that way and will NEVER forget that lesson!!

Submitted by Anonymous (not verified) on