Hang on to your wigs and keys, folks, it's WAL time in the Rigid heddlers. 

We are following a draft for a log cabin pattern.  I will be working on a scarf, using knitting yarns from my stash.  I have a 10-dent heddle and my sett is 5 so I am warping in every other slot/hole combo.  You may do whatever you like, scarf, shawl, table runner, it's up to you.  Once you know what are are using for yarn and have calculated your sett (check out the sett calculator on Weavolution here and a discussion of using it by Sharon Alderman and Kurt here), I suggest you consult the Weaving calculator here to determine the length of your warp and the amount of materials needed. 

Jane Patrick at Schacht has given me permission to use her pattern from the Newsletter.  Here is the link to the project done by Schacht using a RH loom to make a log cabin table runner.  Everything is explained quite clearly in here.

Log cabin is a block weave that uses alternating dark and light colors in both the warp and weft to create a complex and interesting look.  By creating two blocks, you can choose to vary them with color and texture. 

You will need two different color yarns, one dark and one light.  Black and white are great but anything works as long as you have good contrast.  You will also need two shuttles, one for light weft and one for dark weft.

I consulted Helene Bress’ The Weaving Book in which she suggests that consistency is important so when you switch from one block to the next you should always repeat the same value of color (L or D).

Here is an example:  If block A is threaded D-L-D-L-D
            then block B would be L-D-L-D
Here is how the threading draft would look if you maintain the same “turning” thread as she recommends (drafts are read from right to left):

Draft #1
D-L-D-L   D-L-D-L-D   D-L-D-L   D-L-D-L-D   D-L-D-L    D-L-D-L-D
     B              A               B                 A               B                A
In this draft, you are either alternating D and L or you are repeating D when you switch blocks.  You maintain a consistent pattern when using this method.

You can change the blocks and make them each 4 threads which will have the turning thread between block A and block B alternating like this:
Block A:  D-L-D-L
Block  B: L-D-L-D

And the draft would look like this  (remember to read the draft from right to left)

Draft #2
D-L-D-L   L-D-L-D   D-L-D-L   L-D-L-D
       B         A             B              A
This version alternates the turning or repeating thread.

Choose either draft or create your own.  The important part is to treadle “as-drawn-in” which means to follow the same pattern as you threaded.  So, if you are following Draft #1  , you would treadle or weave the pattern like this:
D
L       Block A
D
L
D

L
D
L   Block B
D


D
L
D      Block A
L
D

L
D       Block B
L
D

and on, alternating block A and block B.  Although you are reading from the top down in this version, you are actually weaving from the bottom up. 

It is important to pay attention while you weave, a mistake is more likely to show up.  Check out this reference for woven examples: http://weavermania.blogspot.com/2008/01/ode-to-log-cabin.html

I use adding machine tape and measure out the length required to weave.  This should take into account shrinkage based on your sample.  I use 10% shrinkage in length for cotton and 5% width.  For wool, which I usually full when wet finishing, I allow 10% shrinkage in length and width.  There are also recommendations in the Weaving calculator for various fibers.

When weaving log cabin, I use a small piece of the same adding machine roll or a large index card and write down the treadling pattern.  I keep a straight pin handy and use it to mark where I stop in the sequence.  I try to complete a full sequence of both blocks before I stop in case the pin drops out.  It's a good habit to develop.

I hope this hasn't totally overwhelmed you.  I know it's a lot of information all at once.  I have my warp beamed and will finish threading and tie on tonight.  Not sure I'll find time to start weaving but I'll try.  I have the day off tomorrow (although I will probably drop by here to see if you have any questions).  Otherwise, I will be weaving.

Enjoy yourselves!  This is a great structure that lends itself to tons of variation when you use different yarns and colors.           Happy weaving!

Claudia


 

 

Comments

francorios (not verified)

(Click on pic for larger view)
These are the yarns (Paton's Classic Wool, 100% wool worsted yarn) I have to choose from for the Log Cabin Weavealong on Weavolution.com this weekend. Black, White, Red, Purple. I chose red/white for best contrast so I can see what I'm doing.




This is 30 pairs of warp (60 ends) on 10 dent heddle for 6" scarf on the Cricket loom.



After winding the warp, I have to sort out the pairs according to the chart I found on the Schact newsletter at this site
http://www.schachtspindle.com/Newsletters/Newsletter2005Spring.htm




First an inch of waste yarn to set the spacing, then two shuttles of red/white, I duplicate pattern I used to warp up. Switch is every five pairs, but still plain weave. I overlap/twine the edges where the colors cross.


OOOPS!! Missed the change. Unweave - do over!


That's better! More later!

  *Warning: My wool yarn is sticking, be sure to clear shed every time!*

Have a good day!  

bolivian warmi

Wow! This is spectacular. The red and white look amazing together. Excellent photos showing the process, Franco. Thank you!

Laverne

I want to try this on my backstrap :-)

one question........I notice that you leave your edges very ''roomy'' anticipating the fact that it will all fill out in the wash. What happens if you weave it with thew weft snugged up against the warp? Will it kind of shrink in when you wash it?

Caroline (not verified)

Yup! You get a scarf with designer curves styled to fit a barbie doll.

Log cabin is a balanced weave The threads need to go around each other. If you pull the weft snug the fabric becomes more warp-faced and waisted. Its something you have to work out for yourself, and most people bubble or arc the weft so it can move and settle into place when its fulled.

Manicgirl (not verified)

I set up my loom yesterday, and I choose a wool yarn in dark red and brown. The contrast is, shall we say, very small... It looks great, when I catch it at the right angle, but otherwise it doesn't look like much at all. Also, I have a very loose set for this yarn, as I plan to full it somewhat when it's finished.

I realise now that it would have been better to chose a yarn with more contrast, but I'll do that for my next log cabin project.

 

I threaded LDLDLD DLDLDL LDLDLD. I'll have to read through, and really understand, Claudias first post, because my pattern is not symmetrical. There is a lot to learn! And I really appreciate you being so thorough Claudia, thanks!

 

bolivian warmi

When I say snugging up next to the warp I am talking only about at the edges. So do you leave the weft hanging out about a one warp width space at the edges?

Caroline (not verified)

Well, I don't, but my selvedges are not brilliant.  Like many people I have one edge thats acceptable, and one that looks a bit scruffy and undulates gently, so if I concentrate really hard, I improve the bad edge and lose the good one, grrrr!  Practice, practice! I can always crochet around the edge of a scarf anyway as a trim and hide the whoopsies.

francorios (not verified)

Laverne and Caroline,

I'm finding the edge to be problematic since there is two shuttles in play and two wefts to go over the outer warp. It's almost like twining the edges, but when you change the pattern you throw the color you did the last time again and that throws off the twining. I'm hoping the wearer will just be dumb struck by the clever pattern and not notice the bumpy edge. But I am trying to make it look consistent with the direction of twining/overlap.

ETA: I am also measuring the width with a ruler/scale as I weave. That extra room is to counter the draw-in from the last shot of the shuttle. I'm trying very hard to keep at 6 inch width. If I pull it snug, it tends to draw in. I think the other issue is that the yarn measures 12 wraps per inch, the heddle measures 10 per inch. There SHOULD be some wiggle room in there for the yarn for a plainweave.

Manicgirl,

The pattern is NOT symmetrical as I think of symmetry. As I weavealong it's like dancing to a count of five, one two three four FIVE! and FIVE! one two three four...

I printed the page from the Schacht newsletter, http://www.schachtspindle.com/Newsletters/Newsletter2005Spring.htm 

Because it has a very nice little chart and I had it sitting next to the loom while I warped. It was a big help.

When I get done with this red/white and I understand the pattern better, I will weave the black/purple together because I think I would look good when the light hits it at the right angle.

I hope that helps.

Have a good day!

francorios (not verified)

Did anyone notice the skeins of yarn? I bought those at Goodwill for 99 cents each!  Goodwill is a second hand thrift store.

I've been saving these 100% wool  yarns for weaving "real" scarves!

Have a good day!

Caroline (not verified)

Goodwill looks to be really good! I have bought weaving books from Goodwill in Chicago; even with postage its cheaper than buying them here!

I've occasionally found spinning fibres, and once found some handspun I could use, but the finds are few and far between at my local thrift shop. The manageress watches Antiques Roadshow and The Collectors ( an aussie show on collecting) and prices everything as if its in mint condition, and at its insurance value, grrrrrr! Then wonders why it doesn't sell. I love it when I find rare antiques or bits of gold and silver they have missed, hehe! The really valuable items get removed at head office, but sometimes something slips through.

I haven't got as far as warping up yet, I'm spinning furiously and carding batts, but I'm not looking forward to the selvedges one little bit. Did you double the yarn in your selvedges? I have found that makes a difference, so perhaps it would help here with twining the two wefts.

francorios (not verified)

Nope, did not double the yarn on my edges. It would be kind of difficult because I'd have to have slots on each edge with a double thread, and the pattern seems to rely on pairs.

I have enough to pay attention to as it is.

But it is coming along.

Have a good day!

francorios (not verified)


Here is a picture of the crossed threads on the back beam after advancing the cloth.
(click picture for larger view)
This is because of the thread sorting I did after direct warping the loom. The crossed threads above the back beam (upper dowel) will prevent a clear shed when weaving.



Here is the back beam after straightening the threads so none are crossed over each other. Below the beam doesn't matter until I advance the warp again and will straighten all again. A crochet hook is very handy for this. Don't keep the warp super tight while doing this. Have your heddle in neutral position. My loom is on a folding wooden table (tv tray table) and easy to turn around.


Here is some detail of the weft splicing. I over lap the weft two inches to blend in with the pattern. I also try to splice on a pattern change. The yarns sticking up will be cut off after wet finishing.

Have a good day!

Kurt Pippin (not verified)

No, I pinch the edge (as you do with your backstrap) and snug up right next to it, while making a straight angle (not bubbling) with the weft. Bubbling (as far as I'm concerned) is for weft-faced or weft-emphasis weaving.

Pip

Kurt Pippin (not verified)

I see symmetry. You have 'reflection' at both points of doubled DD and LL, and if you had one more DLDLDL the entire warp would be symmetrical.

But log cabin doesn't have to be so tidy and even.  You can alternate L and D and occasionally double the LL and/or DD at random.  As long as there are 1-by-1 light and dark bands broken periodically--not necessarily evenly--with doubled warp and weft lights and/or darks, the basket-weaving effect will show, assuming your warps and picks per inch are relatively balanced. I personally like log cabin when only the darks are doubled, as it looks more like basket weaving.

Example random warp DD L D L D L DD L D L D L D L DD L D L DD L D L D L D L DD L D L D L DD.

You can repeat the same pattern in the weft, but you don't need to, as long as you stick in a doubled dark or light (or only doubled dark or only doubled light) every so often.

Kurt

jenadina (not verified)

 I agree about the bubbling, Kurt...I stick to angled weft and don't have a lot of trouble with draw-in. When I weave warp-faced, on the other hand, I lay the weft straight across.

 

~Jen

Manicgirl (not verified)

Thanks Kurt!

That's something I will have to think about, and maybe try for my next project. When I feel my project isn't symmetrical, it's mostly because the squares aren't, well, square. It might have to do with my beat, or the number of picks in each colour too.

This is what it looks like:

Like I said, I would have liked yarns with more contrast, the effect is only visible at a certain angle. But I still like it, and I think I'll make a totebag with it, after fulling the cloth.

Kurt Pippin (not verified)

As I mentioned to Claudia elsewhere, colour-and-weave usually looks better off the loom, after it's wet-finished and relaxed. With it stretched on the loom, you see more of the warp and weft at the intersections, so the pattern is less distinct than when it is relaxed.

I like your colour choices here. Some of the really high contrasts in log cabin dance too much in my eyes. This one is subtle and invites a closer look.

Kurt

francorios (not verified)


Okay, here's my scarf after I cut it off the loom. (click picture for larger view) For this project I am using twisted fringe as described in the instructions for the log cabin pattern found at
http://www.schachtspindle.com/Newsletters/Newsletter2005Spring.htm

Working groups of 5 strands, 2 of one color and 3 of the other, I twisted the group of 2 tightly, twisted the group of 3 tightly, twisted those 2 groups tightly in the other direction and tied a knot to make it 6 inches long. Read the newsletter. Note: The newsletter describes making a table runner, I just changed dimensions to allow for a 6 inch by 72 inch scarf.

Next step will be to wet finish.

Have a good day!

francorios (not verified)


Cross posted from my blog!

Here is the finished log cabin scarf! (click picture for larger image)

I hand washed it in lukewarm water with Woolite soap to set the wool and to full it a little bit. I gently squeezed the fabric in the soapy water for about 15 minutes, then rinsed it through two changes of lukewarm water. I was surprise how cloudy the water became, I think there is some sizing or starch in the wool yarn.

I squeezed out the water, do not wring, then rolled it in a towel to absorb most of the moisture, then remove from towel, drape damp scarf over the back of a chair and let it sit overnight. Trim off the extra bits of yarn and the tips of the fringe. It's finished!

Many thanks to Claudia at Weavolution.com for suggesting this pattern for a Weave-A-Long group weaving project.

Now on to the next one!
Have a good day!

bolivian warmi

That has come up beautifully! Congrats.

Laverne

francorios (not verified)

Thank you.

I was kind of surprised how well it came out on my first try. I just might be getting a hand on this weaving gig.

Now having said that my next project will be a dismal flop and I'll beat Caroline and Claudia for warp of the week.

Let me say that this Cricket loom is a lot fun to use!

I'm really looking forward to the next scarf and I have a list to fill!

ETA: Yes, I added to the project pages.

Have a good day!

claudia (not verified)

Franco,

Your scarf is wonderful.  Thanks for putting it in the Project section for all our 3900 users to enjoy!

Claudia

Linda (not verified)

Franco... you are just the bomb!  Now I know what I did wrong.  It was not that I had it warped wrong.. I did not change colors with each throw... wow.. so simple... Thanks...

Linda

SteveL (not verified)

Nice...  R U the first finished?

My black & white project is about 12" long at this point.  Weaving is going slow.  The ribbon yarn I selected just seems to want to be untwisted and laid flat at each pick.  Further, how the ribbon folds around the selvedges requires hand adjustment to help smooth the direction change.   And, in general, has been the challenge with this project:  winding from skien to ball to bobbin to warp - all introduced twist to this yarn I concluded I didn't like, so I've been fighting it along the way.

I don't think I'll weave with ribbon again.

My wife looked closely at my loom last night.  She was aware of "activity" as she saw me in the middle of direct warping and at one point she helped me beam the warp, however she had not looked closely since.  Now with dozens of picks in pace.... I heard a big WOW so this may turn out to be a Christmas present for her !!

Now, to convince her an AVL floor loom will open up new possibilities ;-)       Man, would I like one of those under the Christmas tree!

 

Steve

francorios (not verified)

Steve,

Thanks for posting your experience with the ribbon yarn. I have several skeins of ribbon yarn I plan to use and I'll keep your words in mind when I plan my scarves.

Have a good day!

Franco Rios

francorios (not verified)

Hey Linda,

Yes, change colors with each throw, use same color twice to change pattern.

And don't throw twice in same shed, that was a common goof I was making and unmaking.

Have a good day!

claudia (not verified)

 Hey Linda,

The key to log cabin is "tromp as writ" which is translated to mean that you weave in the same order you warped.

If you warped the loom  (D=dark and L=light)    D L D L D   Then, you weave  D L D L D   and you keep repeating it just as you did when you warped the loom.  So, you end up, as Franco said, repeating the D thread between blocks.  So, your warping and weaving looks like this  D L D L D  D L D L D  D L D L D  D L D L D  D L D L D    etc. across the loom when warping and up the loom when weaving.

I screwed up at first, too.  But once I got it, I got it.

Claudia

francorios (not verified)

Of course, to muddy the water a bit,
my blocks had alternating changes for L and D,
sometimes repeating D and sometimes repeating L.
 
Have a good day!

Linda (not verified)

Thanks, everyone, for the help and encouragement.  I will now re-warp and do it right this time.  I'm so looking forward to having this pattern work out... ;o)

djfiberarts (not verified)

Wow Franco, your scarf is gorgeous! I only finished warping this morning, lol!

I warped D-L-D-L-L-D-L-D, D-L-D-L-L-D-L-D so that is how I weave it, right?

DJ

francorios (not verified)

DJ,

Thank you. Yes, you weave it in the same order you warped it.

Have a good day!

francorios (not verified)


Here is my next log cabin scarf in progress with the other two colors of wool yarn, the black and the purple. (Click on picture for larger view)

The color pattern is very subtle. I am having trouble keeping track of my color changes and you can see where I missed a color change (purple instead of black at change).

I am weaving under the best light in the kitchen in the evening, but today is with all the windows open for light.

I know it is going to look great when when its done.

Have a good day!

bolivian warmi

Yummy colors!! That Cricket is getting a work out!

bolivian warmi

Well I just couldn't resist. I participated in this WAL as a watch alonger/cheer alonger and learned so much! I have been wanting to experiment with balanced weaves on the backstrap loom for ages but just couldn't get motivated to do a plain weave so this log cabin has been just the ticket.

Well it is not perfectly balanced al the way across and I am still settling on the right beat-first block not beaten enough (I am used to pounding away at my warp faced weaves) and I am not sure about the second block but I am quite happy with it. Still trying to figure out how to neatly turn the two wefts at the edges, interinking them etc but this is a great learning experience. Hopefully I will finish it tomorrow.

Laverne

claudia (not verified)

Nicely done Laverne.  Glad you joined it.  It looks lovely on the backstrap loom.

Claudia

francorios (not verified)

Wow. I have to say you nailed it!

Why is there so many sticks in the picture?

Have a good day!

bolivian warmi

The multiple sticks really help keep the warps spaced-they are ''locked into place in multiple crosses and don't fall out (so I can lean over to get my Diet Pepsi and there are no accidents!)

This is the first time I am trying this system and it is great. I have seen photos of looms in Asia and other places with a bunch of thin sticks like this lined up behind the shed stick-which were obviously not pick up sticks-and never knew what they were for. Now I THINK I know!

Laverne

francorios (not verified)

Okay, I get it. I've done the same thing with two pencils and rubber bands not just to hold the cross but to help maintain spacing.

Have a good day!

bolivian warmi

Off the loom! Yes it's very short.  I wasn't confident it would work out so I didn't want to invest too much yarn in it.

I'll make SOMETHING with it even if I cut it up and cover a notebook with it or something like that.

Laverne

claudia (not verified)

Well done Laverne.  You nailed the process and the concept.

You are amazing with your backstrap loom.  I'm sure you could do anything with it.

Claudia

francorios (not verified)

It's a great piece!

I think it would make a nice little bag.

Have a joyful day!

Submitted by Anonymous (not verified) on