I am trying to plan where I can put a 48" wide Norwood Cranbrook loom in my house. !! How much floor space will I need? How close to a wall can I go?

Comments

MaryMartha

For a loom of this style, you need to be able to stand comfortably at the back.  I think at least 2 feet at back and on one side, and 3 feet in front and the other side is a good rule of thumb.  I crowded that a bit with my current loom, and regret it. Once assembled, these things are not easy to shift.

Rena (not verified)

Thank you! So both sides need 2-3 feet? I know the front and back need more. Do you have a 48" Norwood Cranbrook? I wonder what the floor dimensions for this space should be....

jander14indoor (not verified)

While awkward, you can get away with about a foot on the left side, room for the shuttle to clear a full width project.  That's where mine sits, though it can be tight if you need to repair a warp thread on that side.

You definitely need more room on the right side where you move the warp.

Back of loom.  You need room to stand/sit/kneel and otherwise move freely while warping.  Not so much space while weaving, unless you have to repair one of those pesky warp threads again.

Front of loom.  I warp back to front with a warping trapeze so the real constraint is not warping, but weaving.  You need 3-4 ft or so permanently for that to comfortably sit and get onto and off your weaving bench.

Like you, I have my Cranbrook in a tight space.  I have it on an area carpet on hardwood and have found it fairly easy to slide around when I need more space temporarily on the left or back side.   I have more problem with the loom walking as I weave that I need to solve than I have with moving it for space to warp.

Just another perspective.

Jeff Anderson

Livonia,  MI

Rena (not verified)

Thank you very much for your suggestions. If I have the right side (as I face it) near a wall, would you say 20-24" would be okay? As long as I can step in and wind? Is most of the width in the beater? How much wider is the main frame than the reed? According to Schacht, the Cranbrook width dimensions are 22" more than the width of the reed. Is a Cranbrook that much wider and deeper than a Glimakra? I don't know if you can answer all of these questions...but thanks anyway!

Rena (not verified)

Thank you very much for your suggestions. If I have the right side (as I face it) near a wall, would you say 20-24" would be okay? As long as I can step in and wind? Is most of the width in the beater? How much wider is the main frame than the reed? According to Schacht, the Cranbrook width dimensions are 22" more than the width of the reed. Is a Cranbrook that much wider and deeper than a Glimakra? I don't know if you can answer all of these questions...but thanks anyway!

theresasc

of my Norwood Cranbrook.  This one is a monster, 63" weaving width and I have it set up in my weaving loft.  These pictures might give you an idea of how much room I have to work on and around the loom.

I am lucky that I have a large weaving loft for my looms, but still, the Cranbrook does take up its share of the space.

Submitted by Anonymous (not verified) on