I have a skein of hand painted silk and I want to maintain the warp in the order it was painted as I wind on my warping mill.  I understand that the length of the warp needs to be either 68" (the circumference of the skein) or 136" which is what I am planning.  How do I wind the warp and keep the colors lined up as they were when painted?  I have read an article by Syne Mitchell but she uses a RH loom and plain weave.  I am weaving a satin on a 16 shaft Toika.  I designed the draft with help from a friend and I want to maintain the pattern so it doesn't look muddy when woven.

Thanks in advance for any suggestions or if you can lead me to an article (I have the one from HW 2010 and it's not much help.  It calls for a warping board with the same circumference as you warp skein).

 

Hand painted skein and purple weft

Comments

Erica J

I don't know what warping mill you have. My mill allows me to adjust the cross bars. I woukd try making a my guide string the length you need and use it to adjust the mill and the path on the mill to the length you need.  Then when you wind the colours should remain in their order. 

Sara von Tresckow

Using the guide string will help immensely. However, you will have slight variance due to the stretcy nature of the yarn. This should give you an ikatlike effect - if your weft is solid, you needn't fear the muddiness that sometimes happens with variegated yarn.

Do consider tying a short warp to a dummy to save on waste. 16 shafts is a lot of depth to sacrifice.

Submitted by Anonymous (not verified) on