I am looking at purchasing a floor loom and I really like the Leclerc Artisat.  Can anyone give me pros/cons of this particular loom? I need something compact that I can fold up and put away when not in use.  Any comments/suggestions welcome!

Comments

SallyE (not verified)

My first loom was an Artistat, purchased in the late 1970s.   As a beginner loom it's OK, I guess, but I found it flimsy and not that well built.   It definitely won't do rugs, BTW.   I had to constantly tighten up the screws as I wove to keep it from getting really wobbly.  Ergonomically, it wasn't that good either - but that might depend on your height.  I'm 5" 9".  The first ones (and mine) had front hindged treddles, but they later came out with a kit to change them to back hindges, so apparently other people didn't like the front hindges either.

If space is an issue, you'd be much better off in the long run looking for a Macomber - either a small B5 or a CP.  Either of these will only take a few inches more when folded and are much better looms.   Macombers will cost a little more, but since you will probably spend hours doing it, good tools are worth it.

 

khakijean

I purchased a brand new Artisat in 2012 and I love it.  It's not a rug loom, but I didn't purchase it for that purpose.  It's very well made and a good fit for me - I'm 5'2".  It has a very good feel to it when weaving.  I don't ever fold mine and put it away though, I mainly use the folding feature for ease of threading the heddles, so I can't comment on the practicality of that.

Good luck with your loom purchase!

 

Barbara DesertRat (not verified)

I have limited experience with looms (and, weaving, for that matter).  I own a LeClerc Artisat and a Glimakra Standard, which I purchased after weaving a rag rug on the Artisat and decided to look for a Standard, which I love.  I still weave on the Artisat, usually towels, when I have rug warp on the Standard.  For me, it was the perfect entry loom, and the price was right, having bought it used.  I am 5'7" and find it ergonomically comfortable for me.  Have you had an opportunity to weave on the Artisat (and other looms)?  I recommend reading through the Weavolution files to see others' thoughts on various looms, which is the process I went through in determining that the Glimakra Standard was my "just-right" loom.  I don't think you can go wrong starting with an Artisat in good condition for a reasonable price, but you may very well come across another great loom.

JudiL

Thanks for your comments.  I plan on visiting a studio soon to check them out in person. I am 5'4" and a novice weaver.  I started with a rigid heddle, and I'm ready to expand but I have limited space so I'm looking for a loom that is somewhat foldable.  So far, my other interests (wheels, etc) have gravitated to the rest of the house.  Luckily for me, my husband doesn't mind!  I figure the comments give me ideas on what to look for when I try them in person.

Catweaver

I have a Leclerc Artisat - my first floor loom. It was made in 1982 but the person who imported it into Australia died before they could unwrap it. Eventually it was put up for sale and I bought it in 2011, still in its original packing. It has been fine for me - I'm 5'5'' and it is comfortable to weave at. I use a dining chair with a cushion to push me up to the right height. It works fine - I haven't wanted to make any rugs, and it is light enough that I can move it around the room if I need to. I weave on wood floors and the loom stays put! The shed is not always great, though - and I'm not sure if that is a problem with all Jack looms, or if mine needs some adjustment. But it won't be me adjusting it: I have just sold it to make room for my brand new Louet David that is due to arrive in a couple of days. The Artisat has been a good first loom, and if I had to, I would keep going with it, but really I'm glad I don't have to. I have not tried the other looms mentioned in the replies so I can't comment on how they compare to teh Artisat.

ricatlga

My first floor loom, after my Easy Weaver, was a used Artisat.  Quite old, but still in good condition.  It was all I could afford at the time. Yes, it is lighter and you should be sure to keep connections snugged up.  I have learned a lot using that loom.  I don't know how it compares to the the newest models (other than the treadle option).  My only complaint is that the front beam is not removable.  So I have to lean over it to thread the heddles.  I'm 6 foot tall and use a piano bench and that has worked fine for me. 

sequel (not verified)

The Artisat mostly folds for getting it through the door and long term storage.  It is kind of flimsy compared to the Macomber, but the lower castle on the Artisat makes it less obtrusive visually.  The working height, or rather the height of the weaver, depends on the bench you choose.  LeClerc makes benches in 2 heights, but people come in all sorts of configurations.  Don't expect the matching bench to necessarily be the right height for you.  My preference for a "folding" loom is the Schacht Standard low profile.  More solid and stable than the Artisat, lower profile than the Macomber.  But the Macomber is still a better loom...

tommye scanlin

JudiL, your original question was about pros and cons of Artisat.  And what I'll say here is more a ramble than specific answers to your question.  But... here goes...

I began weaving with a Dorothy table loom, then a couple of years later made what was for me a big leap financially--I bought a new Artisat. That would have been around 1973 or 1974.  

I used the loom constantly as I taught myself about weaving.  It didn't sit without a warp on it for long--in fact, I usually warped it right up again as soon as I cut something off.  I made changes to the loom as I learned about weaving--added four shafts to make it an 8 shaft loom and added a sectional beam.  I had the loom until the late 1980s.  I purchased two other looms while I had the Artisat--in 1980 I bought a 12 shaft Macomber and a 6 shaft Kessenich (why only 6 when I might have gone with 8?  Well, I was doing a specific weave then that used 6 shafts and I already had an 8 shaft--the Artisat).  

In 1988 I had a "conversion" and became a tapestry weaver.  All of my floor looms then went to new homes (except for the big Macomber--it continued to live with me for a few more years).  

The end of this lengthy tale is that I used the Artisat very much and quite happily for a decade or more.  It was my "go to" loom for quickly weaving scarves, runners and placemats.  I did weave some double courdoury rugs on the loom although it wouldn't have been sturdy enough to frequently weave rugs, I found.  

So... that's my Artisat story.  

Tommye

sequel (not verified)

I am acquainted with Cheri and disagree with many of her evaluations.  I have a Herald, as do many of us out here in the real world, but she really slams them in her reviews.  I don't think she has the innate mechanical expertise to get the most out of a loom, so when she says a loom is hard to get along with, take that with a really big grain of salt.

Submitted by JudiL on