I'm weaving a 6 shaft satin on a Glimakra drawloom and the lamms hit each other as I treadle. Would anyone know how I can get this to stop? It really slows me down. Thanks

Comments

Sara von Tresckow

YOu should have only two lams moving for each treadle.

Just hitting each other is no reason to stop and fret about it - unless they are actually getting caught on one another, just keep weaving.

Yvonne K

Have a look at the tie up suggestions in an article called "Everything you ever wanted to know about countermarche..." Go to www.weaversschool.com and click on the tab on the side marked "resources" and download the PDF document.

 

ReedGuy

Are your upper and lower lamms colliding or just side to side sway? If they are colliding you may have your treadles a little high or need to upper lamms slanted up slightly. The distance from the floor of the treadles should also be maintained between the upper lamms and shaft bottoms. This will depend on the length of heddle between the eye and the shaft bar. The heddles limit the range of motion. I'm talking about the main heddles and not the pattern ones.

Contact Joanne Hall about your loom. She also has a Glimakra Group on  the forum to answer questions.

cottageweaver (not verified)

I'd highly recommend Joanne Hall's Tying up the Countermarche book, Becky Ashenden's video or Dress Your Loom the VavStuga Way book, or The Big Book of Weaving by Laila Lundell (new edition coming out soon).  These books/videos are easy to understand and are time-tested, straightforward methods for Scandinavian looms. I believe the Weavers School article was written as a problem workaround.

Submitted by Anonymous (not verified) on