I''m in search of end-feed shuttle. Found this one. Like how it looks like. However, seems like this is a flying shuttle. Can it be used as an end-feed?  I'm a beginner, therefore would be thankfull for any advise :)

Need it for the plain weave 36" project with 8/2 Egyptian long-stapple cotton. 

This is what's written in seller's description: 

"This is a NICE 15" end feed shuttle with metal tips.  It looks like it has seen very little use - the wood is beautiful and smooth!  Comes with 10 extra pirns (11 total)."

Here are the photos:

Thanks for the advises! :)

Comments

SallyE (not verified)

Yes, that is a shuttle for a fly shuttle mechanism.   The metal tips are the give-away.  The tips usually hit a piece of leather or some sturdy rubber.   I suppose you could throw them by hand, but if that metal tip hits your hand, or happens to go off the shuttle race / warp and land on the floor, you could do damage.  

I use a regular end feed shuttle on my macomber, and was having trouble with it sailing off, and so I built a kind of stop for it.  I was more worried about dinging the shuttle itself, but something like this might work for you also and prevent damage to your walls or floor.   As for you hands, you are going to have to be careful.

http://weavolution.com/group/diy-looms-tools/shuttle-race-addition-26360

sally orgren

-You can lay the thread into the tension box, you don't need to thread it through something, or poke a crochet hook into a hole to grab the thread and pull it through.

-The bottom of the shuttle is open, making it easy to push the pirn up when reloading

For a handweaver, I am wondering about the metal tips and the weight of these shuttles with wooden pirns. (The EFS's that I am aware of for handweavers usually come with plastic pirns.)

Is a heavier shuttle more ideal for an automatic loom than a human hand/wrist?

kajs

I'm almost afraid of it :) Thank you for the link. I wonder if there are EFS that are light and comfy...

kajs

I wonder if this will be OK for the 8/2 cotton, as I've read that not all EFS can take any thread...
Yes, I'm thinking hard on weight question too...Seems like this is not too old model...I have a hope that it is not too heavy...

ReedGuy

Flyshuttles are heavier and go with more force. That is why the tip, to catch the 'picker', in order to reset the throwing mechanics so you can send it back through the warp shed. There are several hand thrown EFS on the market. They have no metal cone ends. If that fly shuttle hits a floor or wall there will be more damage to it than the shuttle. As far as the pirns being wood, I don't think that adds much weight at all. I made some myself, and they are pretty light. The weight different might be the metal end that secures the pirn. How are the plastic ones held/secured by those that use them? The ones I made, the wooden piece looks exactly like the plastic ones I see for sale.

Everyone raves over EFS quite often, I may make a hand thrown one this winter sometime. Just to say I have one to. ;)

kajs

Oh, what a nice idea! I can try to order EFS from my local artisat! He is great at different weaving supply. Your pirns are VERY beautiful!

sandra.eberhar…

I have several different sizes of EFS (not the metal tipped mill shuttles).  The picture you have is of an EFS designed to work with power looms in a mill.  EFS for hand use are much different.  Schacht makes them, Leclerc makes them, Bluster Bay (my favorite!!) makes them.  They are much lighter and don't have metal points.  I have small 11" ones I use in my small jack loom, and 15" ones I use on my  bigger looms.  Many people like EFS, they are faster and give you better selvedges.  They do tend to be more expensive.

kajs

Oh, I've seen new Bluster Bay shuttle yesterday in the i-shop - it's great! Such a beauty! It is my dream now :)

Susan_Fineberg

Does anyone recognize the maker of this EFS?  I purchased this on e-bay and would be curious to know if anyone recognizes the makers mark.  And yes, I am getting a fly shuttle beater so I do need this type of shuttle.

Submitted by kajs on