How can I showcase my dyed and textured warp? A few months ago I took my first dyeing class and ended up with beautiful warp material. Now that my loom is clear from the holidays, I got it threaded and tied on. The center of the warp is ultra texturized, chunky rayon flanked by panels of 16/2 cotton. I really want to show off the warp, so I thought I'd keep things simple with tabby. But, I've had difficulty getting any weft to lay against the texturized warp in a pleasing way. Does anyone have suggestions for a weft yarn that will cooperate, or a weave structure that will really highlight the warp? I'm fine with some of the weft peeking through (be nice to add a third color), but mostly I don't want to obscure the texture and dye effects.

Comments

sally orgren

What is the ypp of the 16/2, and how is it sett?

What is the ypp & sett of the "ultra texturized, chunky rayon"?

(The two yarns should probably be sett differently, with a more open reed to accommodate the chunkier stuff.)

A photo so we can see the difference in size between the chunky textured and the 16/2 would be helpful.

---------

In general—

If you use a much smaller weft, that will allow more of the warp to show on both surfaces, and it will also change the hand of the fabric to something a bit softer. Since you are at 16/2 warp on the side panels, (and I assume you already tried that for weft) I am not sure 20/2 will help you here. The nubblies in the warp might be resistant to beating. They may seem to want to push the weft back toward the beater, creating an irregular fell line in this area.

I would consider switching to a twill instead of a tabby. Perhaps twill will improve the ease of weft placement over the 1:1 interlacement of tabby. The problem you may still face is that the nubbly stuff won't allow ANY weft to pack well, unless it is big, fluffy, soft and forgiving, allowing the nubblies to nestle in. (And then it will no longer be a warp dominate fabric!) 

A gentler beat may be required, resulting in a more open look. I am not sure how different in size the two warp fibers are, but weft that packs correctly into the thick nubbly stuff may look too loose in the 16/2 areas. If you are beating for the 16/2 to balance, that may distort or be impossible to beat in the nubbly areas.

In general, warp floats on one side of the fabric = weft floats on the other side. So a structure with warp floats would be a "one-side-preferred" fabric in your eyes.

An alternative is to do a supplementary warp with the textured stuff. That allows the 16/2 base warp to provide the supporting structure, and the fun stuff can dive in an out of the warp plane at will, warp floats showing on both sides. 

Note of caution—when you think of floats, the final purpose of the fabric should be considered. Floats that are too long will snag.

A really out-of-the-box idea is to sett and weave it very openly (i.e sleazy), with a slightly thinner weft, maybe even eliminating the 16/2 warps altogether. Tabby is ok. Then go back after it is off loom and sew it in key places to retain the integrity of the fabric, so you have an open, drapey & lacy fabric. I'd consider this option only if the nubbly stuff proves to be impossible to weave normally, or is so distorted by any weft it starts looks like a mess.

Again, photos would help refine the ideas to solve this one! I don't think there has ever been a warp so impossible to weave I had to cut it off the loom and toss — just options to explore and new techniques to learn.

be.wierd

I've tried several times to post a pic, but Weavolution keeps telling me the comment field is blank. I'll try once more with this post. The two warp yarns are sett differently. The chunky one is 8epi, while the smaller is 24epi. I have tried several twill variations, which does make the weaving slightly better, but the overall look is not that great; it doesn't look like it belongs. I'm fine with a more open weave, but none of the weft I've tried beats/pushes down in somewhat of an even line.

endorph

change browsers to get comments to post here - I usually use Firefox to post photos in the comments section. I use IE for everythingelse

Claudia Segal (not verified)

If you click on help in the black bar at the top of the page you will find the help topic on how to post photos in a forum thread. That should help you with adding photos. If not, please feel free to pm me and I will help as best I can. Claudia

Bonnie Inouye (not verified)

It is difficult to combine such very different warps in a single layer. 24 epi is loose for 16/2 warp; on a loom by itself, your weft would probably cover most of the warp, especially if not using plain weave. What number of picks per inch were you hoping to use on this warp? That is the heart of the problem. If you aim for 8 picks per inch with the thick textured warp, that's what you would get with the whole warp. 

Are you sure that this thick yarn is appropriate for warp?

I have successfully combined different sizes of warp using double weave and also in deflected double weave but then each warp has its own weft yarn so it can have its own epi and ppi.

If it is already on the loom, sample and see what you can do with it. You might try inlay with an extra weft every now and then just into the thinner warp areas.

Bonnie

 

Artistry

We were talking about sampling? How about this. Treat each warp panel separately with appropriate weft, then use a clasped weft join every so often, can't say every 4 picks or 6 would have to play around with it. Yes the sides would not weave as fast as the center. If it's a big descrepency I would consider doubling the 16/2 making it a thicker thread. It would be closer in weight to the nubby .The clasped wefts might work better. Might not work at all! I don't think I read the intended use for this piece?

sally orgren

Your idea means you could play up the center, and keep the side panels more fabric-like. End-purpose is definintely a consideration. 

be.wierd

It's supposed to be a scarf...eventually.

sally orgren

Let us know how you proceed. (And no worries you ignore everything and strike out on your own path.) Good luck!

Sally

Liese (not verified)

if your hand painted warp won't be unpleasantly disrupted you could scatter the nubby warp ends throughout the scarf width or in a pattern. Sley them in their own dents and as suggested your sett for the 16/2 needs to be much tighter - think warp dominate, I use 40 epi for 16/2 rayons. Then as you weave use the nubby yarn occasionally or in a pattern (think a square or rectangle format here). But if you're really in love with the idea of the center panel I think Bonnie's suggestion of double weave would be what I would try for a scarf, I think Cathie's clasp weft idea would be a wonderful experiment if it were a wall hanging.

sandra.eberhar…

The last time I had a warp that was just beautiful by itself, and I thought it would look best without a weft, I thought of satin weave.  The warp that I was looking at was three colors of gold 5/2 pearl cotton, and looked like metalic gold.

Submitted by be.wierd on