Hello, I have been asked to assemble an old loom near to where i live in the western isles of Scotland.

It is now in bits.

I attach a couple of photos of it and would like to ask anyone know how to do a tie-up on it please? It appears to have 4 pedels, 4 lams and 4 shafts.

Is it countermarch or counter balance? I have to go down to the loom in Grimsay tomorrow so would really appreciate a swift reply

, or indeed, any!!!

many thanks, Sallie

Comments

SallyE (not verified)

The angle of your single picture prevents us from answering your question - is it a counterbalance or countermarche?

I don't see the lams becasue they are "hiding" in the picture, but since you said there are 4, I'm thinking it's a counterbalance - unless some are just missing.   I also can't see what's in the castle because of the angle, so I can't see either jacks or pulleys well enough to tell what I'm looking at.   A picture from the front would help a lot. . . . .

sandra.eberhar…

If it has 4 lamms, it is probably a counterbalance loom.  If you show us a picture from the front, as Sally suggested, we can see if there are pulleys or horses.

ReedGuy

From the photo on another thread that was started on this, it looked like some type of jacks in the castle.

Cat Brysch

The Scotish in me is smiling. It is a sweet old thing, isn't it?!? This looks to be a counterbalance loom and would have a direct tie-up for access to every possible draft you could think to weave. Direct tie-up is a little more foot work in the weaving, but less in another as you would never need to change the tie-up...to get a true tabby (plain weave), all you need to do is just change the dance....

ReedGuy

If your gonna dance, bring a fiddle. :)

Sallie Tyszko

We're down here on the island of Grimsay, Sheila Roderick of Scalpay Linen and me of Driftwater Weaves looking at the loom which is now assembled. It does have only 4 shafts, 4 lams, and 4 treadles, and is really cute. It's exactly the same as the late great Marion Campbell of Plockrapool, Harris http://www.youtube.com/watch?v=Ly-lFONTuGk .

Can anyone tell us how to tie-up so the shafts go up and down? We're out of range for the next couple of hours, but will be back around 2 pm gmt so if anyone has any info we would be really grateful if you could help us. Thanks so much for all the info so far, it's been very useful. BTW Reedguy - my husband is a fiddle player!

Cat Brysch

Left to right, so the left most treadle, #1, would be tied up to lamm #1 (closest as weaver sits at the loom), the next left-most treadle, #2, would be tied up the the second lamm (second from front), etc. This creates a "direct tie-up" on a counterbalance loom. Since the sweet old loom is counterbalance, you will work off of drafts with a "sinking shed"....that means to raise harness #1 (closest as weaver sits at the loom), you will have to press treadle #2, and the same with the relationship with 3 and 4.

In order to get tabby, (plain weave) you will press treadles # 2 and #4 at the same time (to raise harnesses 1 and 3), then press treadles #1 and #3 at the same time (to raise harnesses 2 and 4). Each 2-step action creates tabby if repeated many happy times.

Sara von Tresckow

Wait - counterbalance means that everything is balanced - if you bring a shaft down, another goes up.

The "Big Book of Weaving" has excellent directions for tying up the counterbalance loom - you might need more than just a single day to get this loom actually weaving.

And the sinking shed thing appears to be only in the Davison "Handweavers Pattern Book" - other books that I have show a black square in the tieup for a shed that rises - you do need to make sure that however you tie that treadle that the shafts with black squares rise when the treadles is depressed.

Sallie Tyszko

I would like to thank everyone, especially Cat and Sara for their help.

We did the best we could, we tied treadle 1 to lam 1 and lam 1 to shaft 1.The harness had to be dropped so that the warp lay on the race of the flying shuttle, and the shafts are rising to create the shed, I'm not 100% sure it's right....but hey, it works,.. sort of!

Any ideas for the  string-ing up of the flying shuttle? Did you see the old vid of Marion Campbell, isn't she a star? Very fast! Trying to contact Chris the "old loom" expert; I'm back home now but quite willing to go down again and make any changes that need doing.I will be posting photos of the loom when i can steal some from Sheila, but she has a load on her plate just now so i'm happy to wait.Many thanks everyone,Sallie

Sara von Tresckow

Leave the flying shuttle out of the picture until you get it right - if the loom is not in proper adjustment, the flying shuttle will fly right off the track and ding or injure anyone or anything in its path - try to get it warped and weaving a piece of good quality fabric manually - and then look at the fly shuttle and perhaps find someone locally who can help you adjust the cords, etc.

Right now you're not looking for speed - learn how to get quality cloth and then let the speed develop as you gain experience.

Sallie Tyszko

Hi Sara,

It's not for me, I'm a tapestry weaver. (wwwsallietyszko.co.uk) but for a novice lady weaver. I have recommended learning to weave without the flying shuttle first but would like to have it set up for her properly. You are quite right i feel, learn to weave first, then the speed develops as you get used ot it by it's self. Thank you

Sara von Tresckow

A fly shuttle is like a computer - it produces quickly - including mistakes.

A novice weaver needs to learn the basics of dressing the loom, choosing appropriate materials, etc.

Down the line the fly shuttle might be very nice, but my experience in a museum setting with an older sly shuttle device indicates that these older boxes are sometimes out of alignment and need tender repairs before they function well.

As they say in drivers lessons here - speed kills.

Cat Brysch

Harness height on counterbalance looms will best to determined when a treadle is being pushed which raising its 'sister' harness. There is supposed to be a distance between the shuttle race and the warp WHILE THE LOOM IS AT REST! The warp on a counterbalance loom should go STRAIGHT from the breast beam to the back beam when the loom is at rest. 

If the harnesses are hung too low when the loom is at rest, it will put undue strain on the warp when the loom is at work and a harness is raised.... counterbalance looms operate by lowering one harness and raising another at the same time, so that there needs to be space between the warp and the shuttle race (at rest) for this action to take place (at work).

I completely agree with Sara to get the loom aligned properly before adding anything else! Also, please tell your friend that a weaver needs to learn so many good habits....like controlling the selvdges, getting a consistant beat, throwing a shuttle accurately, successfully advancing the work, creating a cloth with integrity, etc. 

Our craft deserves the focus and time it takes to learn good basics and understand the process before adding speed to the mix!!

 

Bonnie Inouye (not verified)

You are lucky to have found that video. There are some places in the film when you can see the treadles and cords in operation. See if you can do a screen capture and zoom in on the image.

There is information available on the tie-up process for a counterbalance loom, more completely in books but some online. Spend some time searching (or have the new weaver search) for counterbalance tie-up instructions.

I use a flyshuttle and have been told that it is a great example of a "simple machine". But definitely get the loom working first. Start with a warp that is no wider than a tea towel and learn how to operate the loom and make good cloth. The fly shuttle works best with a wider warp and you need to be sure that the reed is in good shape. Problems in the reed can send the shuttle off-course. Also the way the yarn is wound and carried on the shuttle makes a difference to the flyshuttle. Get the basics under control first!

Sallie Tyszko

A friend who has a good deal of experiance with verious looms,( and this one is about 100 years old), has written the following  to me, see what you all think...." It seems to be a single action (warp raised only ) due to only one
set of lamms and a single tie from lamm to treadle.
Its also versatile, possibly as both 2/2 counterbalance weave and 1/3
weave, depending on foot treadling as you know about. So 2 treadles
being depressed by each foot in the pattern.
With the tweed weaving being a balanced 2/2 weave, this would have
been the way of it. My concern with a single action would be the
sticky wool warp not making a clear shed, esp for fly shuttle, unless
it made a really deep shed.On Marion's loom it is basically the same, although as you say it is
a double action, which is curious as she has only one set of lamms
and each lamm tied to one pedal. To get double action usually has 2
sets of lamms.
Her loom may have vertical jacks on top but not able to see them.
Rather than the horizontal jacks as is on this old loom.
Do you think the warp is set lower than straight and it only appears
to be up and down?"

I am also wondering if there are weights tied on the bottom of the shafts!!

Sallie Tyszko

ok, Thanks one and all. I'm wondering then how Cat and Sara would propose to raise  AND lower the shafts if there is only 1 set of lams and no vertical jacks or pulleys or horses?

it's got to be weights?

Sara von Tresckow

Your friend is probably right - there are (see the Leclerc Colonial) rising shed looms that use single overhead jacks and direct connections that, in less than clear photos, can look to be counterbalanced or countermarche.

As for the rising shed - if the loom is of this type, you certainly want to put that maiden warp on it and test out how it works it is nearly impossible to tell everything about a loom without having actually used it to weave.

First thing is to be sure that the frame is square - the distance from front right corner and the distance from left front corner and back right corner should be equal - or less than 1/4" off. If it is not square, try to bring it back into square by adjusting screws, bolts and connections. Then check to make sure that the beater is square otherwise that will cause issues with fabric quality.

Then make a smallish warp and apply it to the loom.Tie the treadles according to how the loom is constructed - if rising shed, then do it that way. Weave the cloth observing how it forms, if there are any issues that the back beam is torquing making the cloth off grain, it the shed is somehow sticky or not being weighted properly, that you aren't getting floating shafts, etc.

Upon completion of this warp, you might consider putting it to counterbalance if the rising shed is not suitable.

It is rather simple to make this loom counterbalanced using pulleys and horses - the shafts then work in pairs so that the single lam/treadle connection is both raising and lowering the loom. A counterbalance needs a wooden support beam on the castle - the pulleys and horses attach to the upper shaft bar. There are books showing how the tieup works - and counterbalance looms only have a single set of lams.

Converting to countermarche would be more difficult and not recommended.

Sallie Tyszko

Thank you Sara, and everyone else who contributed to this forum post.

right, now it's back to cleaning up a 15 year old tapestry, 3 panels measuring 6 foot long by 4foot wide each panel!!!!!Any ideas!!? Really needs a good long soak and scrub, was in the entrance to a large hospital for 12 years.

Cheers folkies.

ReedGuy

Scuba gear and a really big bath tub. :)

Submitted by Sallie Tyszko on