I have some friends that bought a 90's avl loom with compudobby gen2 and a huge old compac computer with nedgraphics system.  We can get the computer to boot up to the c: prompt and that is it.  there was no program disc included in the purchase.  Could the program be on the hard drive?  If so, anyone know how to access the program?

I suggested they buy a new software program to run with their laptop. 

1)  what weaving software would you recommend, they are not designers, beginner weavers wanting to weave with their own alpaca fiber, basic weave structures for a 16 shaft loom.

2)  cables with the compac system are the big old d-shell connectors, where would they get the new cables to run between the compudobby box and the laptop?  USB connector

Comments

Bonnie Inouye (not verified)

The AVL compu-dobby II was sold in the later 1990s and into the 2000s. It should work well with an older computer, one with a serial port, assuming that there are no problems with the compu-dobby. I have one of these and it is still working fine.

Your friends will need to buy weaving software that includes an AVL driver. They will also need to learn about weaving! The loom should have some with a manual, but AVL manuals have not won any awards in the past. Still it is good to read the manual.You can read reviews online about the various weaving programs. The best approach is for them to download some free demo versions and try them out to see which feels easier to them. My preference is for Fiberworks (www.fiberworks-pcw.com) and WeavePoint, both of which can run an AVL loom.

If they cannot find an older computer, they need to ask AVL which kind of converter is needed to make the connection between a USB port and the compu-dobby II. Not all of them can do the job. It has been discussed often on WeaveTech so they could join there and read the archives, searching for USB and compu-dobby (which is trademarked by AVL).

If they just want to weave something basic, they could use a 4-shaft loom. With 16, there are lots of options and many nice drafts- so many that they will need to know something about weave structure and float length and sett to choose good drafts for their products. They might start by using 4 or 8 of the shafts on the loom, or maybe they will take a class to learn more about weaving. There are classes at AVL.

Bonnie

loomroomcat (not verified)

thanks Bonnie, I can help them with the weaving part, I have several AVL's myself but the old DOS system computer is foreign to me.  I am assuming it should have come with a disc of some sort. I believe Nedgraphics is the program they have.  The computer seems to be working but there doesn't seem to be a weaving program on the computer. I'd guess they can no longer get that software on a 3 x 5 disc to use with the old computer.

When you buy a newer softward, like the two you suggested, do you have to tell them that you are using an AVL loom?  I will tell them to try and download a free version, didn't even know that was possible.  But they have to have the new cables first.  Will contact AVL.  thanks.

 

tien (not verified)

I think AVL has a new loom driver out that is free, reads wif files and will drive an AVL loom. Check their website for it.

Dawn McCarthy

I haven't yet attempted the AVL free driver but have it in my queue.  Does this computer have an operating system? If so what type and version?  I think part of the problem is first installing a weaving program that can work thru DOS with what sounds like no OS, having no OS will make it quite difficult.  If you can access windows 95 or 98 you can easily install some kind of weave software with driver and use the older serial port connections, it may be a better idea to purchase an older used laptop with windows XP - this will allow for an easier connection to the appropriate ports and to be able to fully utilize the weave software.  I had previously used an old laptop and had to install windows 98 to use the comby and later on my AVL.  Most computers no longer use the serial ports and use the USB.

Dawn

Dawn McCarthy

What kind of disk drive does it have?  Sounds like there are several steps to take before even loading drivers and design program.  If the computer only has a floppy drive it will be hard to install an OS on it be it Linux based or windows, also, check for the type of serial ports and any USB? Does the computer have internet connectivity to downlaod?  It gets to a point where an old computer = a rock and chisel, it may behoove to just bite the bullet and get a computer with a more current system, USB and internet connectivity - you could be up and running in minutes!  No matter the design software the loom driver is generally specific to the loom and can be purchased additionally.  Good luck!

Dawn

loomroomcat (not verified)

I think a laptop and a cable adapter are the way they are going to go.  AVL sells a 9pin to USB connector, they say not all adapters work well.  I am going to call AVL on Wednesday and hope they are more helpful than they normally are with used looms not purchased from them.

We were not able to access any operating system on the computer.  They will just get a new weaving software program and we will go from there.  thanks for all the help.  Not sure I understand the whole driver thing, but hopefully AVL can help with that.  Hard to believe they have anything free.

 

weaver-dyer (not verified)

The "free" driver from AVL is designed to operate with the CompuDobby IV and doesn't function with earlier versions of the CompuDobby. If you use a computer that doesn't have a serial port you will need to use a USB to serial adapter. It may be purchased from AVL or elsewhere. AVL recommends two adapters. I am been kwith the Keyspan adapter. In any case you will need a computer with an operating system and compatible weaving software. You can download trial versions of most programs, but I'm not sure that the trial versions include loom drivers. The loom drivers are unique to specific loom companies and sometimes to individual looms. Lots to learn! Janet

loomroomcat (not verified)

so if they decide to buy say Fiberworks or Weavepointe, do they tell the seller that it is for a 16 shaft AVL loom and they will provide the correct drivers?  Is that how it works?  I have mechanical dobbys myself so I am not familiar with all the computer stuff, just trying to help my friends out.

 

weaver-dyer (not verified)

As far as I know, you should let the software provider know the number of shafts, make and dobby generation--16 shaft, AVL CompuDobby II. Janet

Bonnie Inouye (not verified)

If they buy WeavePoint,I am pretty sure that the driver will come with the program. AVL sells this one.

If they buy Fiberworks, they need to buy "silver plus"- the plus is the loom driver. Tell Fiberworks that it is an AVL loom- there should be a place to check this when you order online.

In either case, they need to learn how to use the weaving software. After choosing or creating a draft, they select "weave" on the program and then usually you have to say how many shafts and which compu-dobby is being used.

I started using AVL looms in 1987. We always had to buy weaving software that would drive an AVL. I've used compu-dobby I and then II and also III but not a IV yet.

"Generation II" was an early (1980s, msDos) weaving program sold by AVL and not a compu-dobby model.

Your friends could use WeavePoint or Fiberworks on an older laptop with Windows 2000 or even Windows 98. I bought an external floppy drive for $30 so I could transfer drafts made on my newer computer to the old one by the loom. Simple drafts are no problem. But in the long run, a USB converter is the way to go.

Bonnie

mneligh

As a computer professional, I would strongly advise against relying on too old computer hardware, since the electronic components detriorate and fail.  It is only a matter of time.  A computer will not run without an OS, but it is possible to fit minimal OS onto floppies, etc.  And yes, you will certainly need drivers.

(A driver is the program that sends signals out the connector port of the computer to a connected piece of hardware that is programed to respond to the command in a desired manner.  They must be compatible with both the OS and the device.)

I would contact AVL, and ask them what is  the most recent computer hardware that can run the drivers, and go with that.  If that machine has no ethernet connectivity, you can transfer files vial the serial ports of an adjacent computer with one.  If using a desktop, you can also add a serial port to most machines if needed. 

AVL can also provide the electronic specifications on the connector required.  If you cannot buy one, locate your local geek population (HS or college) and with the specs they can wire one for you.  If fact, you could contact a local geek first and have them handle the whole upgrade for you.  They frequently are competent, and are a lot more cost effective on small problems like this than a person like me.  They may work for food, tickets, etc.  They also tend to become totally absorbed in your problems and may end up beimg converted to weavers.

Dealing with things like this on much larger scale is why I abandon the electronics when I come home and weave on my mechanical Macomber.  Looms themselves are almost eternal . . .

wollongong

Most effective, least complicated pc services I have ever had. Along with those who have experienced to cooperate with pc mend companies know that is rare! His or her customer service was comfortable as well as pleasant, as well as I needed my notebook back the same morning. www.thenehruplace.com

 

loomroomcat (not verified)

got rid of the old computer and are now hooked into a newer laptop.  Problem seems to be with the electric eye that indexes the program or the cabling between the laptop and the compu-dobby.  Very frustrating.  Wish it just had a manual dobby with the loom.

tien (not verified)

You may need a special driver for the cable. Contact AVL for details on what you need. This happened to me, and getting the right driver fixed it.

Dawn McCarthy

It could be many things,  first determine if the computer is speaking to the loom, is there 2 way communication? Fiberworks has portchecker where you can see the relay of information to the dobby and from.  If there is one way communication to the box it could be cables.  If communication both way but no response it could be the light sensor arm at the loom, this usually requires a mino adjustmen of the arm and or light sensor. Other reasons

1)bad ethernet cable

2) serial to usb port is not allocated or picking up, dropping connection

3) light sensor on loom

I have found the keyspan adaptor (serial to usb the most reliable)

Good luck

Dawn

bloominloom.com

NancyHassel

For immediate gratification and to test the Compu-Dobby II while you work on a long-term solution:  When the DOS PC boots and you see the C:\ prompt type "dir" and see if there are any directories that look like weaving software.  In the old days many of the weaving programs installed in a directory created at the root, e.g.  C:\PWS (for Patternland Weave Simulator).  You can cd into a promising directory and perform another "dir"  to look for files like ReadMe.txt.  Open http://www.computerhope.com/msdos.htm for information on DOS commands. 

Sara von Tresckow

If you are getting a C:/prompt, DOS is loaded. As previously mentioned, type dir/ and see what you get.

PCW started out as a program that was so lean you could put the program AND the data files on a floppy and carry it around with you.

The files needed to run a computer dobby are nothing but simple bitmaps - 8 or 16 or 32 columns wide with black and white squares. You can export such a bitmap from several other Windows based programs - if you can find a way to import them into whatever is in that old PC, it will probably run.

If you do boot the old PC again, let us know what programs may be on it.

Submitted by Anonymous (not verified) on