This looks like a rigid heddle loom, but it has a raddle-type device built in to both beams.  This seems to preclude any cloth take-up, so you are limited to the size of the loom for both width and length.

Have any of you seen one of these before?  How do you warp this?  Continuous warp?  Is it for weaving something specific?

There are no labels, but a lot of grime.  It came as a freebie from a friend of a friend in a bag with no instructions.

Comments

sarahnopp (not verified)

I wonder if this was a commercial product that was altered for a specific prupose. Directly beneath the raddles are screws where I assume cloth and warp beams might go. Maybe? Is there any indication that a ratchet/pawl mechanism  may have been anywhere on the frame? Are the teeth of the raddles the same number per inch?
But you have me curious about how it was intended to be used too :) thinking, thinking 

Sara von Tresckow

That's just a rigid heddle loom from the 70's - they came back them with those toothed beams. There were instructions on your to wind the warp threads singly or in small groups around 2-4 pegs to hold it before turning the beam.

They work - but marginally - I have recently outfitted a loom that I own to have tie-on bars more like the RH looms built today.

Another issue with this loom is the lack of ratchet and pawl tensioning. The nuts holding the beam will not work satisfactorily - every few rows they slip just enough to force you to retension the piece.

fifthoffive (not verified)

The loom has not been modified.

I believe it must be as Sara says.  It seems like a very poor design, and probably more trouble that it's worth to use since I have others looms.

-- Fifthoffive (aka Sara)

 

mrdubyah (not verified)

I have one of these among my assorted rigid heddle looms.  It isn't a great loom, but it works just fine and the teeth make it quite easy to warp using the direct warping method.  If the wing nuts won't hold the tension, try inserting a small lock washer or star washer underneath.  That usually does the trick.  

fifthoffive (not verified)

Thanks!

That's a really good idea.  I think I'll try that.

Submitted by Anonymous (not verified) on