I recently acquired a barn loom that dates to 1860 in Morgan County Missouri. It's been stored indoors in a museum and then home for many years, so is in excellent shape.  I has four treadles and a place to attach one set of lamms on the side. It has two pulleys as well as a "bar" of some sort.  I would like to set this up as a countermarch loom. I have been researching and have several articles and images.  I am beginning to get an idea of what I need to do, but am not sure, so if anyone has suggestions, please share them!

Comments

sequel (not verified)

The old countermarche looms I've seen illustrated with more than 4 shafts usually have an upper piece that runs from the front two posts to the back two posts along each side.  Your loom does not have the back 2 posts.  I'm guessing the shafts and beater are held by an upper member that is attached to the tall front posts. 

SallyE (not verified)

You will need to build a castle to hold the jacks and a frame on one side at the bottom to hold the lams.  It's certainly doable, if you have woodworking tools and skills.  You are also going to have to make a number of heddle bars, depending on the number of shafts you want.

I'd suggest finding a CM loom to look at, to compare with your loom.   Take measurements so that you can scale your loom properly.

 

mrdubyah (not verified)

This appears to be a counterbalance loom.  I suggest you keep it as a counterbalance.  You can then restore it to working condition with much less effort and will likely get better results than if you try to convert it to a countermarche.  You will also preserve the original character and historical value of what looks like a beautiful old loom.      

Joanne Hall

There is a lot of weaving that you can do on this loom, tied up as a counterbalance.  If you are considering the countermarch because you have had a problem with the sheds of the counterbalance tie-up, then read through these instructions on the counterbalance:

http://glimakrausa.com/learning-looms-weaving/intro-to-countermarch-and…

To convert to a countermarch, you need a minimum height on the breast beam of 34 inches, 36 is even better.  If the loom is not this tall, then you will need to put blocks under the legs.

The countermarch tie-up is usually used when you need to use more than four shafts.  You can do this, but do get some weaving experience on this loom with 2, 3 or 4 shafts before adding the extra lamms for tying it up as a countermarch.

Joanne

Joanne Hall

I have taught classes using these looms and yours looks like a really nice one.  It makes me want to start planning a warp for it.  I wish I were there. 

Joanne

Missouri weaver

Thank you all for the helpful suggestions. I wove on a barn loom set up as a countermarch last summer and loved it. However, you are convincing me I should probably set this up as counterbalance, as it was designed to be. By the way, the reed in the beater is 20 dpi so I know it was used for some very fine fiber in it's day.  

debmcclintock

lovely borestaff on the back beam!  see some of these conversations here at this thread #9

and I use the term "barn frame loom"  see lots of words here 

 

sandra.eberhar…

I have a barn frame loom made in the mid 1700's.  It was built with two harnesses; I rebuilt it with 4 as a counterbalance loom.  I wanted more patterning capability and changed it to an 8 harness parallel countermarch, patterned after Louet.  This loom is very large, and is about 40" at the breast beam, which gave me the room to do the countermarch conversion.  I also suggest you set this up as a counterbalance loom and see if you want more harnesses and have the vertical room for countermarch.  I just got a countermarche  loom with a 35" high breastbeam, and have finally got it balanced and working.  The lamms and harnesses don't have a lot of room to move together and it's taken a lot of fiddling to make it work.

sandra 

Missouri weaver

I need to build 4 lamms for my barn frame loom. I have not been able to find any images or instructions to determine size, shape, etc.  Below is a photo of the place where the lamms were attached. The place to attach the lamms is 22" from the floor, 22" where lamms would attach to closest treadel and 28" to the furthest. The loom is about 48" wide on the inside. How long/wide/deep should the lamms be? Are there commercially available lamms that would fit? 

 

Missouri weaver

I know I need harness sticks and heddles.  But I am not sure how to attach them to the pulleys and/or bar.I have attached a closer up photo of one of the pulleys. There is also a bar on a separate piece. In reading, I think I need 4 horses, 2 to attach to each pulley? How does the bar fit in?  I know I need harness sticks and heddles.  But I am not sure how to attach them to the pulleys and/or bar. I feel like I should be able to figure this out, but I am confused and will welcome direction.  Thank you!

Joanne Hall

in the photo are made for tying up an odd number of shafts, like for instance, 5 for threading a satin weave.  The roller on the other part can be used as the top pulleys.

You can see the instructions for the counterbalance tie-up on our website:

glimakrausa.com

go to the home page, left menu and click on Learning about looms, then loom information.

And we can supply you with lamms, horses and shaft bars.  They are listed on our price list on our website.

Joanne

Missouri weaver

Thank you Joanne.  So if I understand correctly, I don't need the pulleys for four shafts; just the roller bar.  How do I know what size lamms to get?  I assume they need to be longer than 28" - the distance to the furthest treadle. But how much longer than that should they be?  I have read through all the materials on the your web site and it is very helpful.  But I don't find answers to questions such as how long the lamms should be.  While I've been weaving for quite a few years, a counterbalance loom is new to me so I am not as familiar with the terms as I'd like to be.

Joanne Hall

Lamms have a center hole to attach the lamm to the center of the shaft.  The width of the inside of the loom determines your weaving width and then you compensate for where the lamm is attached. 

There are holes in the lamms for the treadles.  There will be more holes than you need, but you would just use the hole which is directly above the treadle.  The lamms for the counterbalance tie-up only need to be long enough for the treadle holes.  If you want to later make a countermarch tie-up, you then purchase longer lamms for the lower position, as the lower lamms need to be heavier than the upper lamms.

The shaft bars need to be a few inches longer than the maximum weaving width, so that the heddles will stay on if you are weaving the full width of the loom.

So, you just tell us the maximum weaving width of the loom and we send you the appropriate size or a size just a little longer than you need, and then you cut them to the right length.  If you measure carefully, we can determine the size you need and cut the parts to the right size.  But for the lamms, it might be best for you to put them in place and mark where the attaching hole needs to be, then drill the hole.  This is easy to do and I can help you with that.

Joanne

Missouri weaver

Thank you Joanne. I can picture that now and it makes sense. I'll do some measuring.

Missouri weaver

Thank you Joanne. I can picture that now and it makes sense. I'll do some measuring.

sandra.eberhar…

The heddles,  treadles and lamms need to balance (counterbalance!).  The weight of the heddles needs to be balanced by the treadles and lamms.  It's a lot easier to make them light and add weight to the treadles if needed.  A lot of people restoring old looms make heavy, hardwood heddle bars, but that makes it hard to balance.  I put steel bars on my treadles to balance the heddles, because my treadles and lamms are light, and the upper and lower lams are the same size.

Sandra

Missouri weaver

The barn frame loom is up and weaving as a counterbalance. It works well and is fun to use. Many thanks for your advice, and Joanne, for the matierials.

sally orgren

I was just visiting Kalona, IA, the Mennonite Museum, where they had some old looms. Here are a few photos of key parts you mentioned from two different looms at the site. Hope this gives you some ideas for your loom.

Bender loom lamm attachment:

A different loom at the site, roller bar suspension of shafts.

Bender loom, shaft suspension:

Missouri weaver

Those are very nice old looms. The photos are helpful. Thank you.

Submitted by Missouri weaver on