Hello all. I am new to weaving and new to Weavolution and hoping you might be able to help with identifying some mystery yarn I have inherited. It seems like it might be linen, but it quite hairy, and used in a rigid heddle as warp, the threads were quickly abraided, the fibres that had been rubbed away formed clumps around what was left of the thread, and then the threads broke. Wondering if anyone can suggest where this might be used, and what it might be? I have 2 part tubes in a sort of natural and one part tube in white.

Comments

laurafry

If it is linen, it will make great weft for towels?

Weavingholiday

Thank you! It burns quickly, does not go out on its own, very little ash, and no "burned wool" smell. If I use for weft for towels, would it be okay to have a cotton warp, or should I have all linen, or cottolin? And will the "hairiness" be an issue when the towels get used (will the "hairs" need to be dealt with somehow so they don't come off)? Appreciate your help, I really like the look of this yarn on the cones, am looking forward to making the best use of it.

endorph

towels with cotton warp and linen weft and it works quite well.

Weavingholiday

Thanks to everyone for this help, with this I am looking forward to trying this legacy yarn in some towels in the near future. Best.

laurafry

I often use cotton for warp and linen for weft for towels. It is a great combination. The hairs should not be a huge problem if the warp is suitably set for the size of the weft. When you do a yarn wrap, how many wraps do you get? If you use a cotton that gives you about the same number of wraps you should wind up with good results. Cheers Laura

Weavingholiday

I get about 29 or 30 wraps over one inch. It is a touch irregular, and every so often there is a bit of hard material. If I pick that out, the yarn can be thinner at those spots, too. I tried to wrap so each thread touches but doesn't squish, but it would be possible to squeeze in a more turns if the threads were pushed a bit closer. Maybe 40 if they were really close. Just to my eye it looks a bit finer than 2/8 cotton.

laurafry

Then I would use either 2/8 or 2/10 cotton at either 24 for twill (2/8) or maybe 28 to 30 for twill (2/10). Personally I prefers trills fit towels rather than plain weave but you could sample a little before you decide.

Cheryl M White

Just as an encouragement, I wove some linen towels that were very hairy, and I posted to this site fo find out if I was weaving a burlap sack instead of a towel.  On the loom it was a very far cry from the beautiful towel I was imagining.  After washing and finishing and a good hard press , the change in that linen was amazing.  So don;t get discouraged when you weave it.  If the linen is springy when you put it on the bobbins you can dampen the thread to make it behave.  This site will give you lots of advice and great tips, like those you already got from Laura and everyone else.

Good luck

Cheryl

Weavingholiday

Thanks (again!) for all your advice and encouragement. I have a cotton warp in M and W twill just started on my little Dorothy loom, 2/8 in a lemony yellow, thinking I might experiment with the white version of this fuzzy stuff for a warp, and am now prepared not to judge it until it it finished :) Thanks also for all I have learned through this process, did not even think to try a burn test, could have ended up with wooly towels! Although I knew about wrapping, I had no confidence in my skill at it. Likely would have panicked if it looked odd on the loom, too. Looking forward to some nice towels!
Submitted by Weavingholiday on