I am using singles linen on the drawloom and find the yarn much better behaves if slightly damp.  Problem is, the cardboard quills I love so much start to smell and disintegrate.  Plastic tubing is too smooth and looses grip on the yarn when wound.  Does anybody know of a DIY or retail resolution?  I am looking for narrow quills of plastic with some texture on them to grip the yarn, that way I can keep the yarn slightly damp while working.  I suppose aquarium tubing may work if I punch holes in it to dimple the surface?

 

Dawn

Comments

TheLoominary (not verified)

Hi Dawn, here is a company that produces plastic grip materials. Perhaps you can coat cardboard or plastic quills with the proper grip material for your purpose. The product line is extensive. Wet, dry, spry, brush, etc. Good luck, Frank.  http://www.plastidip.com/

SallyE (not verified)

Have you tried sanding the plastic ones with a rough sandpaper?  That might give them some tooth to help them grab the yarn.

 

Dawn McCarthy

Sally - have you found plastic quills?  This is what I am looking for, very narrow diameter quills (much slimmer than bobbins with no flanged ends).  Plastic tubing and straws are too wide and smooth.  Maybe the hobby store is a place to look.  Cardboard quills usually have some nubs on them to keep the yarn from sliding, they are strong but not moisture proof.

Dawn

TheLoominary (not verified)

 Here is a source for small gage tubing in plastic, brass. and aluminum. www.hobbylink.com, Frank 

SallyE (not verified)

Dawn - I know you have a dog since you've mentioned that in posts.   Do you use those doggy poop bags you can buy?   If you do - two of the little plastic spools the bags are wrapped on make a quill.   Just put them end to end and us a small piece of clear packing tape to keep them together.   They make perfect quills! 

If your bobbin winder is a little too small to hold them on, just used a little masking tape on the spindle of the winder to make it a bit larger.  You can remove it easily for other bobbins.

And, BTW, you can slide the little spools out from the poop bag roll, so no need to wait until you use all the bags to use the spools.

 

 

Dawn McCarthy

what type of diameter are they?  The reason the quils are so nice to use, they are slim and turn smoothly.  I will definitely take a peek, I have two dogs = lots of "quills"

Thanks Sally!

Dawn

Dawn McCarthy

Thanks for the links/suggestions - I love how necessity helps us be creative!  Frank - those links are wonderful for all kinds of things!

Dawn

ReedGuy

I use Scotch tape on home made paper quills. I have used #10 cotton and 2-ply wool (860 yards/lb) so far with them. I was wondering if you tried making one and using some tape to try with the moist linen. That way you wouldn't ruin a cardboard one if the tape didn't work out. The ones I have now I've probably wound 1-1/2 miles of yarn each onto. But dry wound. When I wind, I tuck the tip of the yarn on the end and push on my winder. Then take the tail out when wound. It just needs to be inside a 1/2 cm. Friction when pushing the quill onto the winder holds it in. If the tail where wet when tucked into the quill, might be a problem.

kerstinfroberg

an anecdotical Swe trick (means I haven't tried myself): wind your quills a day or so beforehand (maybe holding the yarn with a wet/moist rag), and place them either in the fridge or the freezer for some hours. It is said that will tame the linen...

 

Joanne Hall

Hi Dawn,

I wind linen on the cardboard quills by holding a damp cloth in my hand.  But I wind a little in the beginning without the cloth, as the moisture will seep down into the first rows anyway.  Most of the time I don't have a problem.  If a quill gets wet, I use a different one next and let the damp one dry out.  And if the ends of the quill get soft, just put a small metal washer on the shuttle's spindle, one on each side of the quill.

Joanne

r1mein54 (not verified)

Dawn, you might try a small tab of double-sided tape (Scotch yellow label) that is used to attach photographs in albums. Wind a bit on the plastic tube and then the linen can stick to the outside of the tape.

ReedGuy

Maybe just use the tape on one end of the plastic quill where the winding begins. That way the throw would be enough to free the tail end of the yarn. I've never worked with linen so I don't know it's character on quills and pirns. :/

sequel (not verified)

Why not wind masking tape on soda straws, like a spiral slipcover?  The tape won't last forever but it's cheap and available.

Submitted by Dawn McCarthy on