HI there... I just bought my wife a 45" Leclerc Fanny model loom. If I know the model what do I need identified you ask? Great question, I'm glad you asked. At the top of the loom on the back side of the main uprights is a flat wooden bar . It, we believe, is connected by a pair of springs to the rear  folding frame. IN all the documentation we've discovered on the internet, and the manuals we've downloaded there are no references to this flat piece of wood. It is attaced to the main uprights by some fairly significant looking metal hardware, and this flat bar can move. WHen it does the entire heddle frame mechanism (all 4 of them) move as well. There are a pair of pins that can be inserted through holes in the metal hardware to make this assemble stop moving. One other thing... this loom does not have the shed controller that appears in documetation for other Fanny looms.

Attached is a photo of the part in question.

Thanks,

Steve

 

Comments

2weave

One thing I forgot to mention. On this wooden bar, on the backside ( I guess the underside, that you can't see in the photo) are 6 cup hooks equally spaced roughly 3" apart in the middle of the bar.

Dawn McCarthy

Not 100% sure but it looks like the old shed regulator 

Did you go to the LeClerc website?  

Dawn

2weave

Yes Dawn, I did :-)    That's where I managed to get the manuals and model information from - the little badge identifying it as a "Fanny" model has fallen off (you can see residue from where it was stuck on the frame originally). The Leclerc badges are still there (Nilus Leclerc, L'Islet, Que, made in Canada). All the features of this correspond to the Fanny model. Actually there is one exception.. the manual indicates a turnbuckle for attaching the brake, but this one has a specifically formed metal rod of the same material and type as the other metal rods and hooks, and the brake itself is spring metal, not cord as referred to elsewehere.

Been pouring over google images, too. I thought this might be some kind of add on, but there is no way for the counterbalance rod to mount without these brackets - which support the flat bar - so it had to have come that way.

S~

2weave

Great... Thanks! Now, those 6 added strings that attach to the regulator, does one each attach to the treadel?

Much appreciated, Dawn :)

S~

 

steve104c (not verified)

2weave, On the left side of the bottom, front rail, there will be stamped a letter followed by  some numbers. This is the model and serial number. I bought a Fanny and wanted to know the age. So I emailed LeClerc this info. and they sent me back the model and year it was manufactured. LeClerc Fanny, built around 1950. I think all Leclerc looms have the same stamps on the same location for ID.
Submitted by 2weave on