I am having trouble with three shafts on my loom sticking. When I treadle any of these shafts the string behind the castle releases however the shaft does not drop. I am interested to hear if anyone has had a similar situation and how to remedy.

Comments

Mshoger

Sorry for posting this twice as I was having difficulty with the process. As a follow up to my question, I did contact Louet and received a quick response from Jane Stafford with the exact solution I needed to fix my problem.

Su Butler

.....and are you willing to share the solution? I have two Louet Kombo looms, and occasionally shafts will stick a bit. Would appreciate knowing what you were told to remedy the problem. Thanks!

Mshoger

Certainly willing to share and not sure why I didn't when I commented. Here is Jane's suggestion:

"Sometimes the metal bars that hold the heddles loosen inside the plastic sleeves that hold them. I want you to reach down to the bottom of the harnesses and push in on each side of the plastic."Worked like a charm for me however I do have to push them in often as I am continuing to weave.

Su Butler

Thanks for sharing. I put some poster sticky stuff, the kind you hand a poster on the wall with - little gooey dabs - inside the plastic on the ends of the shafts. This seems to keep the shafts in place, but is easy to remove if I need to move heddles. I have not had any issue with the shafts sticking since I did this, but wanted to see what your resolution was before I posted! When they stick now, I simply make sure the loom is square and that seems to remedy the problem immediately.
Submitted by Mshoger on