I have short arms. And legs, of course, but the legs aren't really the problem, the arms are. I just successfully (YAY!) threaded & tied up my first warp on my new-to-me Varpapuu loom. As expected, I get a great shed. My stool (formerly belonged to a drummer) is infinitely adjustable, so I can make it be at the correct height for this loom with a high (36") breast beam and my little homemade counterbalance with a low breast beam (30"). In either case, I can comfortably reach the treadles, so that's fine.
The problem is reaching the beater. When the beater is returned to its resting position, it's so far away from me that I have to have my belly pressed up against the loom to reach it. (I have this same problem on my Macomber, which is one of the reasons I don't like it.) In order to be a comfortable distance for my arms to reach it, the resting position would need to be about 3" closer to the breast beam.
I've certainly seen looms with a handle affixed to the top of the beater bar, presumably to address this issue. But I'd really much prefer not to do that. Instead, I'd prefer to put blocks on the castle so that the beater is at rest 3" closer to me. I've never seen this done, though, and figure there's probably a reason for that.
So what do you all think? Is this a reasonable modification? A really bad idea? Please explain (aka show all your work, if you're in school) so that I understand the implications. Do you have a better idea? I know I'm not the only short weaver out here!
Thanks loads!
Comments