Hello all, I'm new to weaving and have bought a 4 shaft Lillstina loom. It looks fantastic but I have sticky shafts. HELP. I think it has been abandoned for a couple of years and dried out. We have left it for a while where it will live in our house to get used to our house. We (me and an experienced weaver friend) have put it together giving it a good clean and have run beeswax down the runners and on the ends of the shafts but it's still sticky (particularly one side of shaft 4). Does anyone have any ideas of anything I can do to get it running smoothly. Thanks in anticipation. Regards Jan

Comments

Erica

What mechanism is used to raise teh shafts? are they connected via cords, chains, some other mechanism. If you can post a photo it might help us help you.

Cheers,

Erica

jan hannaford

Hi Erica,

Its a Lillistina 4 shaft wooden loom, connected by cords. Its a counterbalance floor loom.Will this problem solve itself when I have warped it up ? I know it had been standing for some time and I suppose it will have to get used to a different environment having now been moved.

This is my 1st experience of a floor loom as previous to this I was using an old table loom with metal shafts. Any help or advice will be much apppreciated. 

Many thanks

Jan

SallyE (not verified)

In my experience, bees wax is sticky, so that might be adding to the problem.   I'd use regular candle wax, paraffin or bar soap.   You might be able to scrape off the bees wax and put something else on.

 

Claudia Segal (not verified)

I agree with Sally e. The beeswax may be causing you more trouble. Remove it and do not put anything on the shafts. I have 2 countermarche /counterbalance looms and have never experienced sticky sheds. I suggest you remove the beeswax and put a warp on the loom and give it a try then. I believe you will find it improved. Pictures would be of great assistance. Claudia

thealpacalady (not verified)

I, too, had a problem with shafts sticking. Mine would change with the tieup. Go figure! I was told to spray the harnesses and the tracks with spray silicone. Since you put the wax on yours, I would lightly sand them first to get rid of the wax. I didn't believe this would work on my loom because the problem seemed to be coming from a different area on the loom, but this worked wonders. Haven't had a problem since. It was so good that I have used it on a lot of my equipment. Good luck . . . Leslie

Submitted by jan hannaford on