I'm fascinated by shadow weave effects. I have the Handwoven on the subject, I have a friend's note from her weaving course, I have changed a draft from Atwater to Powell threading and tie-up and I have woven samples. And still I do not really understand what's going on... Is there a "shadow weave for dummies" anywhere on the Web or in a book? (Btw. I understand simple color and weave effects, and I understand blocks as in Atwater-Bronson lace. But I don't understand what the blocks are in shadow weave.)

Of course I don't expect any of you to write what would amount to a major article on the subject (as I said, the one that appeared in Handwoven didn't make things clear for me), but I'm hoping somebody can point me in the direction of a website or publication (preferably one that's still available to buy at a reasonable price). Google is not very helpful, neither are the online archives of weaving documents I know (handweaving.net and cs.arizona.edu). But I'd really, really like to weave my own patterns...

 

Comments

lkautio (not verified)

Just jump in. I'd start by making a threading draft I like and adding the shadow.  Twills are a good place to start, though you can use other structures. Try a straight twill, then a point, then add complexity as you go. Draw it down each time and see what you need to do to make it work properly.  There's a section in the Handweavers Workbook by Chetwynd that gives good directions.  Look at a lot of shadow weave drafts, thinking about the placement and symmetry of the shadowing thread.  Try separating out the main pattern all by itself, then the shadow pattern all by itself.  You can think of the blocks in shadow weave as two thread blocks - a main thread and its shadow.  That may or may not help.  Voolich and Lang talk about it that concept in their monograph on parallel shadow weave (not the easiest place to start if you are having trouble with Handwoven articles). That book shows ways to extend the concept to interleaving structures beyond the usual rather simple twills. Play and practice - always key and always fun! Good luck.

Laurie Autio

Kade1301

are you referring to? Amazon gives me A Handweaver's Workbook by Heather G. Thorpe and The Weaver's Workbook by Hilary Chetwynd.

And the Voolich/Lang "Parallell Shadow Weave" seems completely unavailable :(

Btw, my problem with the Handwoven article is not that I don't understand it per se - it just doesn't explain how shadow weave works. It tells about the history, about changing between Atwater and Powell system - but not what I really want to know! What I want to know is how it is possible to get patterns with shadow weave that I can't get with "normal" twills or plain weave - circles, for example, and wavy lines.

But if you say one block consists of only two threads - one dark and one light, then that does indeed help. I think...

 

Bonnie Inouye (not verified)

Do you have weaving software? If so, which program? If not, I suggest downloading one of the free demo versions. Weaving software really helps you to understand how a draft works. Why? Because you can change one thing and see what happens to the drawdown. You can zoom out and see the effect. Look at the structure view and the color view. Start with a dark/light alternation in warp colors and then modify the value of the dark warp and watch what happens.

Here is how I make a new design in shadow weave. Mostly I use Fiberworks but other programs have similar tools. (Fiberworks has a free demo version.) First I need to tell you that I hardly ever choose to make a symmetrical design and I prefer organic shapes and non-repeating drafts, unusual but I find them more fun to weave because they keep changing. I start with a threading for warp A, my first warp color. I use all my shafts and make a profile design that has a movement I like. If you want curves in your threading, make some curves and think about how large you want them. Start on shaft 1. Use half the number of ends desired in one repeat, and end on the last shaft so it will repeat easily. I test my profile threading with a diagonal line in the tie-up and I try several options for treadlings- a long diagonal progression, a large point, some curves, and woven as drawn in. Make adjustments if you feel that the threading curves could be more graceful.

Then use the "parallel repeat" or "insert parallel" tool in your weaving software. You want an "extended parallel" that uses all the shafts on your loom. Choose the default interval which is half the total number of shafts in use.

Choose a different color for warp B and alternate A/B/A/B across the warp.

Do the same for any profile treadling you like with this warp. Give the weft two colors, also alternating dark and light value- they do not need to be the same as the warp colors.

For your tie-up, make a twill tie-up with half dark/half light. If you are using 8 shafts, this would be a 4/4 twill tie-up. For 4 shafts, it is 2/2 and for 12 shafts it is 6/6.

I hope this helps! If you want a symmetrical draft, you need to do this with part of the draft and then make it symmetrical.

You might want to get or borrow a copy of Madelyn van der Hoogt's book on drafting. It is helpful in general but does not go into depth with shadow weave.

Bonnie Inouye  www.bonnieinouye.com

 

lkautio (not verified)

Typed this in and lost it.  Try 2.

I was referring to the Chetwynd book, Weaver's Workbook - my fault for not looking up the exact title. You may be able to find copies of Lang and Voolich through Weavers Guild of Boston, or through a yarn shop that happens to have a copy left. Books are often available used (online, at guild and estate sales), and through interlibrary loan (free!). 

The Weavers Craft magazine that Jean Scorgie puts out has excellent explanations of individual structures, focussing on one or two per issue.

While it is tough to get circles etc. without hand manipulation in plain weave, you certainly can get circles, wavy lines, and other interesting effects with twills (and most other structures) though the float length Is often longer than in shadow weave. Unfortunately, Handwoven and the internet resources you mention don't focus on design or individual creativity.  Older magazines such as Weavers, Weavers Journal, Interweave, and Prairie Wool Companion are worth collecting. Joining Complex Weavers when you are ready is a great way to learn more about structure and design.

Laurie Autio

Kade1301

Unfortunately I live in France. Thus, no interlibrary loan (well, not for American technical literature), no guild or estate sales, and no weaving books - not even in French - in second-hand bookshops.

I know about undulating twills and love them, but I'm worried about the long floats (a test piece for an angora-silk scarf turned out unwearable). So I was hoping to be able to get similar effects in shadow weave - with shorter floats.

I have and use Weave Design for testing patterns, and I have played around with shadow weave - without understanding it. It's as if there's a switch in my brain that needs to change position for things to click into place. Oh well, with a bit of luck it will come with time. Right now I'm busy working on getting a decent internet connection..

 

Bonnie Inouye (not verified)

If you can get a decent Internet connection (also a problem this summer in my mountain cabin) look at this website:

www.weavezine.com

There are lots of articles available there, some with in-depth explanations. The editor, Syne Mitchell, liked to have information and not just recipes. I wrote two articles for WZ about weaving curves. You can make a curve in any structure with at least 3 blocks. The more blocks, the smoother the curve. You are right about long floats being a problem for functional fabrics, and the answer is to make the curve with a consistent weave structure. I enjoy weaving organic shapes.

Bonnie Inouye

Kade1301

that I have "only" 4 shafts. Which somewhat limits the techniques where 3 blocks are possible :( But I'll study your overshot curves - thanks for the link! (I see what you mean about the internet connection) Btw, I'm not so much thinking "organic", but more "op art" (Bridget Riley, for example).

Bonnie Inouye (not verified)

Shadow weave and warp rep (closely related drafts) give you 4 blocks on 4 shafts. Also overshot, crackle, turned taquete, and one form of double weave. Of these, I think overshot might be the easiest to understand,  probably because I started there (in 1967).

You can do op art designs in shadow weave. Those little parallel lines can make a dizzy feeling but sometimes that is part of the goal of op art. Email me privately if you want help with this. My connection and Weavo together are very, very slow!  Anyway, the lessons I show with overshot treadlings in the WZ article can be used as outlined above to make curves and circles in 4-shaft shadow weave. Very large circles will look pixellated with 4 shafts.

Bonnie

Kade1301

for mentioning your article on overshot curves - it's brilliant! (If anybody from Interweave is reading this: That's the sort of information I would like to see in Handwoven!)

Overshot does seem fairly straightforward (of course, I've never tried to weave it yet, pitfalls may appear in practice - but the theory seems pretty clear now) - maybe I should put shadow weave on the backburner for the moment and get practice with overshot blocks. Once I'm competent with curves and circles I'll only need to figure out the shadow part...

And have I understood this correctly: When I wove an undulating twill with a tabby pick of sewing thread after each twill pick, I wove it almost "as overshot"? The main difference being that in overshot the warp and the tabby weft would be fine yarns and the pattern weft thicker, whereas I used a thick warp and pattern weft and a thinner tabby weft. Or have I misunderstood?

 

Bonnie Inouye (not verified)

Overshot is woven on a threading that alternates odd/even shaft numbers. This allows you to create a flawless plain weave ground cloth. The design comes from the pattern weft, usually thicker than the tabby weft, floating over and then under the ground cloth. An overshot treadling usually includes repeats of a pattern treadle, possible because of the tabby weft used between those pattern picks.

If you start with a true twill threading, you can weave as overshot by using essentially a profile treadling design (freehand draw the treadling) or you could use something like this with 4 pattern treadles on a 4-shaft loom: 1,1,2,2,2,3,3,3,3,4,4,4,4,4... it is rare to see a single pattern treadle in an overshot treadling. The repeated pattern picks make a bold design.

There are lots of undulating twill drafts but most of them use repeated shafts in the threading which create longer floats but not a plain weave ground.

The design on an overshot cloth is much easier to read than a design in shadow weave. That's one reason I think overshot is easier to understand and easier for making up your own designs. However, you can work on profile designs for the effects you like, and then express these designs in either structure on a 4-shaft loom.

I really like overshot for designing at the loom, while weaving.

Bonnie

Kade1301

whether I really understand your last post... When I did my experiments with undulating twill, I started with a straight twill threading (straight twill was also my first weaving sampl - I wanted to check whether the yarn was spun to the right size for what I had in mind). Straight twill does alternate odd and even shafts, so that requirement of overshot would be fulfilled, wouldn't it?  Then I treadled the undulations  - actually, I simply turned the drafts of all the straight-treadling drafts I found in my various books. What is a "profile treadling design"?

I believe it's Sharon Alderman (though it could have been somebody else) who writes that her undulating twill example has too-long floats, so I inserted a tabby pick of sewing thread after each twill pick (I have six treadles on my four-shaft loom which makes that easy). I wasn't particularly happy with the result but that's a question of detail (as in the relationship of warp, tabby weft - nylon's not the best choice, anyway - and pattern weft and sett), I think.

"The design on an overshot cloth is much easier to read than a design in shadow weave." - Amen to that! In shadow weave I don't "see" how the pattern works (the pattern appears, but I don't understand how or why). Whereas a nice, coloured, thicker yarn on top of a white plain weave background should really make things easy. Gotta find some yarn to experiment with...

Bonnie Inouye (not verified)

You asked if weaving an undulating twill with a tabby was overshot, you forgot to mention that you had turned the draft. Usually undulating twill drafts have a threading that undulates and a straight treadling. Why? I guess that people like the look of the vertical columns and they prefer an easy treadling sequence. If you turned the draft, then you have a twill threading and it does alternate odd/even. Overshot is a twill derivative and traditional overshot threadings often include a run of straight or point twill.

If you thread a twill and sett for a twill, you can weave it as overshot but the design will be elongated. Using a very fine tabby weft helps.

When you thread for overshot, the sett is appropriate for plain weave, not as dense as the sett for a twill.

A profile draft is a draft that just shows the design. Do you have any books about weaving drafts? A good book or two or three will help explain weaving terms, concepts, and structures. Weaving is a very large field, very old (around 30,000 years) and still developing! A good basic weaving class would also be helpful. You can learn a lot about weaving on your own (I did this, starting in 1967) but a good introductory class will save time.

Bonnie

Kade1301

Unfortunately, there are no weaving classes in the immediate vicinity and, having a farm, getting away for any length of time is a major undertaking. But I think I have a nice library now (from Chandler over the New Key of Weaving to Mastering Weave Structures and Jane Patrick's Fabric Design for Weavers), only shadow weave seems to be sadly absent (another appeal to Interweave: How about a new book dedicated to shadow weave?)

But I know about profile drafts - it was just "profile treadling" that threw me. Sorry for forgetting to mention that I had turned the draft. I think you are right and the reason why most drafts have the curves in the threading is that it makes treadling much easier. I, personally, think it makes treadling deadly boring... Plus, I notice that with the curve in the threading, when I beat just a tiny little bit too hard, I flatten the curve (and in scarf-width, with a fairly low sett, there's not a lot of curve over the width). If the curve is in the treadling, a too-hard beat will accentuate the peaks (which, for the pattern and the material I had, looked better to me). And threading a straight draft gives me many more pattern possibilities (I believe - am I wrong?)

Bonnie Inouye (not verified)

A straight draw threading gives you many possibilities, especially when you have many shafts. But it does give you a very small threading repeat. If you have 8 shafts, a straight threading is just 8 threads, a third of an inch on a 24 epi warp (a standard sett for twill with 8/2 cotton). With 4 shafts, you only have 4 threads per repeat. Now think about the shape of the design in the cloth, from the drawdown part of the draft. This fits into a "design rectangle" (my term when teaching workshops); the width of the rectangle is the threading repeat and the length of the rectangle is the treadling repeat. You can learn to make curves that suit you, but this always depends on the scale in each direction. I use overshot to teach curves because there are choices in the size of the threading repeat. With a longer threading using a straight profile (a diagonal progression in the threading, whatever size you like) you can make small curves, medium curves, and long curves. The sett and beat really should be determined by the cloth you need: durability, drape, firmness, warmth, and texture are factors. If the curve looks too flat or too tall, adjust your curve. The design comes from the draft but you can still make it up as you go along.

Send me a personal email, OK? Weavo is tough with my very slow connection. You can find it on my website, at the bottom of the opening page. Shadow weave is not that hard to understand, but it is harder to see the pattern and how it is formed.

Bonnie

the busy weaver (not verified)

Someone can correct me on this if I'm wrong but it seems to me that shadow weave is more a manipulation of the light and dark threads to create your design than a particular weave structure. In other words, you do this fancy threading and you end up with plain weave. So you're just manipulating colors. 

lkautio (not verified)

I'd consider it a particular type of color-and-weave effect. You may end up with mostly plain weave or some plain weave, but unlike log cabin, for example, you won't end up with only plain weave.  Generally the floats are at most 2-3 threads long, though it is possible to get longer ones.  You are manipulating colors, but doing it on a regular progression by making small changes to structure. Log cabin manipulates color by changing the color sequence, plain Jane shadow weave leaves the light-dark (or hue 1/hue 2) sequence alone. It is also possible to think of it as a particular subset of interleaved drafts.

Laurie Autio

Dawn McCarthy

I sometimes run a class on Shadow Weave on weavo - We discuss color and weave and the two methods of drafting and manipulating the design.

Shadow weave is color and weave with plain weave and two thread floats.  Using a computer program you can asses how the design works by observing the interlacements without the alternating color sequence and then with.

The result is great design impact with a sturdy weave structure.

Dawn

http://bloominloom.wordpress.com

MaryMartha

I strongly recommend Dawn's class.  I found it very well organized and clearly presented.  I have a feeling it would be just the mix of theory and practical advice you are looking for.  The handout alone would probably answer your initial question. I hope Dawn continues to expand her offerings of "structure" classes.

Submitted by Kade1301 on