Hello all, I'm new to weaving and have bought a 4 shaft Lillstina loom. It looks fantastic but I have sticky shafts. HELP. I think it has been abandoned for a couple of years and dried out. We have left it for a while where it will live in our house to get used to our house. We (me and an experienced weaver friend) have put it together giving it a good clean and have run beeswax down the runners and on the ends of the shafts but it's still sticky (particularly one side of shaft 4). Does anyone have any ideas of anything I can do to get it running smoothly. Thanks in anticipation. Regards Jan

Comments

r1mein54 (not verified)

Have you double checked the runners to make sure there was no bowing, twisting or warping?, also check straightness of heddle frame.

loomroomcat (not verified)

does it have a sold piece of wood that goes across the top of the castle above the shafts?  I have seen a couple of Dorsets that a shaft will stick and by simply loosening the screws that hold the top piece on the problem has been solved.  Probably not the best fix, but certainly the easiest.

karentiede

I don't want to admit to how many feet of weaving I'd completed before I realized that the problem with #3 frame "sticking" was that its return cord & spring was MUCH looser than the other 3 shafts...

Submitted by jan hannaford on