Weavers know that not enough tension is as bad as too much tension! In our daily lives, I hope that we all strive for very little tension. However our warps require just the right amount of tension. I was reminded of this recently as I resleighed the 9 meters of warp on my loom. My original plan was to warp two double weave bags, then spread the warp out for cloth. Then our lives took another turn. Our plan had always been to buy the house that we currently rent. I won't go into the reasons why, but this is not going to happen. So we started looking for other houses and found a great new home! This is very exciting, but put a monkey wrench in my weaving plans. I knew between teaching, Weavolution, and moving there was no way I'd get 9 meters woven off my Glimakra before we moved, the date is still to be determined! I thought it made sense to warp the loom for the cloth first instead of the double weave. After much sampling, I'm weaving a herringbone shawl for myself and will do a meter or so of similar cloth for Oliver. The sampling was essential not only to choose a good weft thread, but also to help me work the kinks out of the tension. The long process of achieving just the right tension on this warp made me think of a few other things.

We receive regular feed back about Weavolution, most of which is glowing praise and we thank our members for that. However in our time as Weavolution's owners we have recieved a few comments regarding tension on the site. I know we all want to achieve a balance on the site that will keep members coming back and welcome new users to the site, while still providing constructive feedback. This benefits everyone as it creates a more exciting and content rich site. We hope that everyone will consider the Golden Rule before posting here. We do not want to discourage constructive criticism, but we do not want negative feedback to drive users from the site. We ask that everyone keep in mind when posting that the person you are responding is someone's daughter/son, mother/father. We are all people and it is very easy to misinterpret the written word, so please be kind.

Here's to achieving the perfect tension,

Erica & Oliver

Comments

endorph

to your new house - it is lovely! I am jealous :) Tina

Erica

We do love the new house and will love it even more when we've moved in! One thing that is not as obvious in the photos are the low ceilings. There are only 2 rooms in the house that are high enough to accomodate my Glimakra. The room in the photos wiht the pastel British flag comforter will be my new studio, it should serve quite well, though I have to say it will be the smallest studio I've had in years. It will have the best light though! ;)

Cheers,

Erica

EvaHall

Erica, this is a very nice house, to me it looks very english. I am myself in the middle of a big moving project, moving most of my things  from Norway to our new house in Denmark. That is a move of 2000 kms. At the same time I am settling for the next year in a small apartment here in Bodø. Next summer I will retire form work and join my husband in Denmark. That means that my Glimåkra is waiting in a container in Denmark, waiting for us to come in the beginning of june to unpack and place it in my new weaving studio. In Bodø I will have to do with a table loom and a RH loom.

I wanted to insert a picture of the sad (temporary)  condition my Glimåkra, the system insisted that it lie down, so here it is.

Like you I have noticed that moving interferes quite a lot with weaving, and I am looking forward to being temporarily settled in front of my table loom in Bodø.

Eva

Erica

It certainly does! I have had to seriously consider how to move my Glimakra with a few yards of warp left on the back beam. I recieved some great tips from Weavolution members and feel fairly confident that moving the beam wiht the warp in place will go smoothly.

I hope you have some fun with the freedom that a table loom can provide. I'd encourage you to do a lot of creative sampling in Bodø!

Cheers,

Erica

kerstinfroberg

is it threaded? Then unhook the shafts and wind them on to the beam, tie a sheet around the whole package. If there is weaving going on, and you don't want to cut off, continue winding until the reed and the cloth beam also are "on" the warp beam. You'll need a bigger sheet, but it works fine.

(I once did that when demo-ing - we took the whole Glimåkra apart, everything in place, and carried it a couple of hundred meters to the site, put it together again. It took 3-4 persons and two trips - but is was so short a way to go it wasn't worth getting a car. The loom was full size - 120, IIRC.)

endorph

I would love to have a room that I could dedicate to weaving. As it is now my loom is living in the living room - I occasionally fold it up and move it to the spare bedroom. I could weave in there but I like having the TV to keep me company. . . Maybe someday. Good luck with moving the loom.

Tina

Erica

Kerstin, I can't tell you what a relief your advice is, as I do have some weaving in progress. I am still going to try to finish those two projects before we move. Once those two are cut off the loom has to be rethreaded and sleighed anyway, so will keep the cross in place and secure on warp beam.

Tina, I have been frotunate enough to have my own weaving space in the last two houses as well. However with a newborn on the way a room that can be closed off will become essential! I have also been fortunate enough to have better light in the studio with every move! It is very exciting. Oliver has just told me we should be good to go for move starting 11 June, so that give me two weekends to weave 3-4 meters! I think I can! :)

Cheers,

Erica

Submitted by Erica on