Can anyone help me understand the drafts in her book? Slightly lost. Thanks

Comments

Bonnie Inouye (not verified)

In Ravelry there is a group called Warped Weavers. They did a weave-along on shadow weave within the past year and this was discussed at length.

 

Broderie (not verified)

Thanks! I'll go look there. You're always such a wealth of information! :)

Debky

I've looked and haven't found this discussion on Shadow Weave a long yet. Any chance you have a link?

Thanks.

Eva (not verified)

Some time ago I wove a shadow weave shawl using Powell's pattern 8-10-12, the photo is shown on page 248 in her book.  I can give you the details of how I followed her instructions for this particular pattern, hope it helps:

First, the tie-ups are explained on page 9: the number of shafts for this pattern is 8 (the 8 in 8-10-12 is the number of shafts), so I used the tie-up under "eight shaft/rising shed" because my loom is a rising shed loom.  I tied treadle 1 to shafts 1,3,5,7; treadle 2 to 2,4,6,8; treadle 3 to 2,3,5,7 and so on.

Next is the threading, look on page 215 titled "8-10 Shadow weave. Extended point twill development." You'll see a Profile Draft with all capital letters letters and a Threading Draft with capital letters alternating with lower cap letters.  The Profile Draft is a shorthand notation so for the full threading follow the Threading Draft - a capital letter indicates a dark warp end and a lower case letter indicates a light warp end (as explained on page 6 where the symbols are explained).  So, for example, you would read Aa, Bb, Cc, DdD, cC, bB, Aa like this:  1,2,3,4,5,6,7,8,7,6,5,4,3,2,1 making sure you follow the dark/light sequence correctly.

Next is the treadling on page 215, for pattern 8-10-12 you would use treadling sequence 12 (the 12 in 8-10-12 means that you should use this particular treadling for this pattern).  You'll notice that there are 11 more treadlings you can use with this one threading and photos of each of these patterns are shown on page 248 labeled 8-10-1 through 8-10-12.  The underlined treadle number indicates a dark weft and the treadle number not underlined indicates a light weft.  So for example, in pattern 8-10-12 you would read the treadling like this:  treadle 8 - light weft, treadle 7 - dark weft, 6 - light, 5 - dark, 4 - light, 3 - dark, 2 - light, 1 - dark, and so on.

If you use weaving software it really helps when you plug in all this info and generate the full draft so you can see how your pattern looks.  The pattern can change dramatically if you thread or treadle dark/light instead of light/dark. 

Submitted by Anonymous (not verified) on