Hi !

I relatively comforatble doing finish wood working. I've built several looms and tools. However, I don't really undersand how a tapestry looms shafts rise/slide or how the leashes work. Can someone provide me with pictures and an explanation or point me to one.

Thanks!

Nik

Comments

tommye scanlin

These are many. The most basic is a simple frame, either small or large, with warp stretched from one point to the other, either around the frame or from nails at top and bottom. The weaver might, on a simple frame, simply pick the two sheds needed of the plain weave structure of tapestry with the fingers. Other tapestry looms, either home made or commercially made, might have a shedding mechanism. For instance, the Mirrix tapestry loom has a device that, once threaded, will allow the weaver to rotate the shedding mechanism and create one shed, then the other. You might look at the Mirrix website to see an example of that loom. Fireside Cantilever tapestry loom and Fireside Traditional tapestry loom has a harness system connected to treadles. You might look at the Fireside Looms website to see those. When leashes are used on a tapestry loom, they're installed with each new warp. One shed is created by placing every-other warp end on a stick that stays in place (the open shed) and the other shed is made with leashes being looped around the back warps, the alternate of those held up by the shed stick. It's hard to tell you where to see a photo of this --although Rebecca Mezoff has recently made a posting to her blog about her set-up of a tapestry loom on which she put leashes. Archie Brennan has designed several versions of metal pipe looms that he has diagrams of on his website. If you do a web search for Archie Brennan you'll find his webpage. An older book, New Key to Weaving, by Mary Black, has quite a bit of information about tapestry, including a method of tying leashes. Also, the American Tapestry Alliance has a book list at their website: http://americantapestryalliance.org Look under the education tab at the home page to find the list of books. These are just a few suggestions about places to continue your search about tapestry looms. Hope they help. My website has a few photos of some of my tapestry looms, by the way: http://web.me.com/tmscanlin Tommye

nikolas (not verified)

Thanks! that was a big help!

nikolas (not verified)

does anyone have a 60in or wider tapestry loom?

I was wondering how the treadles are able to be used when working on one edge of the loom. also, how large around are the beams. if they are long and under high tension how do they stop them from warping?

Thanks!

Nik

 

tommye scanlin

Nik, 

I have a 60" tapestry loom.  Since tapestry is done with discontinuous wefts rather than a shuttle going from edge to edge, the treadles aren't much of a problem if only in the center.  However, some looms that are wider have several sets of two treadles placed across the width so that the weaver can shift from side to side a few inches each time, and have a new set of treadles to use.  For instance, even on a 45" tapestry loom I have three sets of two treadles each.  

About beam diameter, I'd have to measure it on my 60" loom when I get to the studio (it's a Ruthie loom, made by Crisp--no longer in business.  The Fireside Traditional Loom is made in much the same way, though).  The 45" Tissart loom (made by Leclerc--no longer made, either) has a 12" beam.  I've modified the Tissart in several ways... adding the two other treadle sets (LeClerc parts are standard even for looms no longer manufactured), and also having a steel top beam (11" diameter) made for the loom.  The top beam over which the warp passed was originally the same kind of beam that comes with the LeClerc floor looms and it was beginning to warp a bit after several years of the high tension that tapestry warps put on it.  John Shannock made the beam for me.  Shannock tapestry looms, by the way, were made of metal and were absolutely the strongest sort of loom you might hope for.  I'm not sure if John is making and selling looms any longer; however, occasionally a Shannock loom comes up for sale.  Recently, for instance, the 100" Shannock loom that had been James Koehler's was noted here at Weavolution as still being for sale.

Don't know if any of this helps or not.  But if you want to email me privately I'll try to send photos to you of my looms.

Tommye

Submitted by Anonymous (not verified) on