This project started as a rebozo for the Las Catrinas group during Halloweave. What a bear.
My first problem arose after I had threaded the loom and needed to wind the warp onto the beam. The density, composition, and length of this warp made it very hard to wind while keeping even tension. This is one instance where I can see an advantage to threading back-to-front, and maybe even sectionally. Pulling all those wool-blend threads through the reed and heddles was impractical.
Once I had the warp on and I started weaving, I had terrible problems with both mistakes (floats) and loose selvedges. I haven't figured out what the problem was with the selvedges, but if I wove normally, I ended up with large loops after beating, even when the weft seemed to be snug against the warp. I had to throw the shuttle, beat, then pull the weft thread to get rid of the loop and beat again. Since the warp is a wool/nylon blend, the warp threads were very sticky. Every time I opened a shed, I had to run my hand back and forth over the warp at the fell to get the threads to separate. This was truly a slow cloth project. As I'm a fairly impatient person, it was torture! Not only was it slow to weave, my desire to weave was depressed.
Now that the project is finished, it is one of my favorites. I really like the look of the warp-faced fabric, and the colors turned out better than I could have hoped.
I learned a lot from this project, if only my over-50 brain will remember the lessons for the next time!
Comments