This is a real noob question I'm sure, but I've just gotten my hands on a 16-shaft AVL dobby loom (an offer too good to let pass) and have ditched my very clunky horrid to use 4-shaft countermarch loom. I'm just wondering if I have to use all the shafts? I knwo there are a world of wonderful patterns I can do on a 16 shaft loom, but I also have loads of 4 and 8 shaft patterns I want to do. Right now I'm getting around in by doing tea-towels that use 2 patterns (1" pattern A, 1" pattern B, repeat then middle section all in pattern A and then reverse everything).  I like to use floating selvedges and I thought I could put those in the unused shafts. Any thoughts greatly welcomed (I have pixeloom software if anyone wants to do a wif file to show) :)

Comments

Mary Rios (not verified)

The really nice thing about your new loom is that floating selvedges are a thing of the past! Use shafts 6 & 7 for 4 or 6 threads on each selvedge as plain weave - no more need for the floaters!

I have a 16 shaft avl - and frequently use it for 4 shaft plain weave... go for it!

 

Bonnie Inouye (not verified)

Is your AVL a mechanical dobby (bars and pegs) or a computer-assisted loom?

When I got my first AVL in 1987, I was so excited to have 16 shafts that I wanted to use them all, right away. I threaded it to a straight draw and figured out lots of ways to weave with that threading using my bars and pegs. I had been using 4-shaft looms for 20 years and was eager to have more than 4 for my own designs.

When you look at a pattern that you like, consider what attracts you to that pattern. Could you take that concept and use it in another way, or combine it with something else that you like?

One of the great things you will find is that the tie-up becomes an area of design with 16 shafts. An AVL makes it easy to change the tie-up.  

Many people begin with twills. If you want to explore multishaft twills, you could use 12 shafts for the twill threading and the other four for a basket weave selvedge. That will be a better fit than plain weave for the edges. You could also use all 16 for the threading and just see how the edges look after the piece has been washed and pressed. It isn't hard to tack down a long float at the edge in a few places.

Bonnie Inouye (author of Exploring Multishaft Design)

Submitted by wovendream on