Hi,

I am new to weaving.  I purchased a newcomb loom and ended up rewarping it myself, which only took me 3 full days!  I followed the directions for the Hollywood weve.  My problem now is that I keep having to back up because my weft doesn't go around the end warps as it should.  I'm trying to beat it harder, which helps, but not 100% success.  Also, what other treadling patterns can I use besides 12341234...?  Thanks

Comments

Claudia Segal (not verified)

Hi Martha,

I'm not certain what you mean by the "Hollywood weave" and the weft not going around the warp ends.  If you could load in a photo (directions are HERE) it would help a good deal to understand what is going on. 

Having said that, if you are threaded 1-2-3-4 on a 4 shaft loom, you can treadle 12-23-34-41 for a twill pattern but you may need to add a floating selvedge to catch the edge warp thread.  

Hope this helps.

Claudia

 

Karren K. Brito

I'm not sure what you have done, your words don't ring a bell with me or what your problem is-- pics would help.  If you have threaded the theads on H1, H2, H3, H4 in what we call a straight draw, you can get plain weave by pushing down treadles 1&3 then 2&4.  Alternating these two shed will give you a simple plain weave and catch the weft everytime on both sides.  I suggest you try that first.

But you can treadle in any sequence that gives you an effect that you like;

1,2

2,3

3,4

4,1 will give a straight 2/2 twill. So you can do many things with a 4/H threaded 1,2, 3, 4.

 

 

Michael White

You can change the tie up by removing the long bolts on the treadles to any tie up a 4 harness loom will do. Do you have 6 treadles on this loom. How many bolts to you have? You can get parts to the Newcomb loom from Leslie of Riverside Loom Works, [email protected] Two questions, 1. do you have a basic weaving book? 2. Where are you located?

Michael

Claudia Segal (not verified)

I think I found the pdf you are referring to here: http://www.subudesigns.com/files/downloads/Hollywood%20rug%20info%20pag… From what I read in this pdf, there is a specific threading for this loom. It's difficult to tell what it looks like from this one page description. This one page item shows a rug that looks as though it is plain weave. Follow Karren's suggestion above to weave plain weave by alternating harnesses 1-3 alternating with 2-4. Good luck and we look forward to seeing photos soon either in this thread or in your project page. Claudia

sally orgren

I don't know about anyone else, but if "Hollywood" weave = plain weave, that sounds way more fun!

Submitted by Martha on