I want to weave a sampler for myself.  Is there a good method for re-threading a warp?

Could I cut them (individually) knot them behind the heddles?  would that work?  Then I'd just have one warp to do.

Any suggestions greatly appreciated. :)

Comments

laurafry

If you have a loom already set up and want to change the threading, I'd insert the lease sticks and tie them so that they 'float'.  The warp can then be easily re-threaded following the cross.

Cheers,

Laura

 

Sara von Tresckow

If you have your warp securely on the beam, simply cut off the firwst fabric, pull the threads out of the heddles and secure them with knots.

Then sit down and thread those ends in the new pattern - after that sley your reed.

This is done all the time. I put on 30 yd. warps and have all towel warps designed for 600 threads. If I don't like what I'm weaving, I rethread and keep going.

Sara von Tresckow

Yes, do this only with the lease sticks in - forgot that some take theirs out - one more reason to weave with the lease sticks left in.

Susan F

would you put in lease sticks with a sectional beam ?

laurafry

You can insert lease sticks no matter what sort of beam you have.  The lease sticks will just secure the cross so that the warp can be re-threaded.  Simply open a plain weave shed (before cutting off!) and insert one stick behind the heddles.  Then open the other plain weave shed and insert the second lease stick.  Secure the lease sticks tying them so that they float - this is shown in any number of weaving books - and then cut off and pull the warp out of the heddles.  Re-thread from the lease sticks, sley and tie on and you are ready to go again.  :)  I'd offer to take photos but neither loom is in a position to take a photo right now.  :(

cheers,

Laura

Susan F

I have never put in the sticks as I weave off all the warp before putting on another but  I could put on more the first time which would save some time, if I want to do more, but different, with the same yarn.

debmcclintock

I posted this example earlier this week on tying on. http://weavolution.com/project/debmcclintock/tying-warp-pulling-thru You can't see my warp beam but I am tying on from my sectional warp beam to the previous warps. Lease sticks are a great thing for preserving the cross. And you can always reinsert lease sticks when you need to maintain order. I do tie on sometimes from a 60 epi to a 30 epi . You just need to adjust your heddles and resley your reed.

Broderie (not verified)

Thank you All!

I've only been weaving a couple of months, I have a Leclerc Compact.  This site & everyone here are so helpful!

Submitted by Anonymous (not verified) on