I recently started back to weaving after an 8 year hiatus.  I wanted to get an eight harness loom.  I have the opportunity to purchase a Barbara IV by Thought Products.  Does anyone have any experience or opinions about this loom?

Comments

kellytwo (not verified)

You might want to send a message to runamuckweaving because she used to have a Barbara V, and can give you more information. I don't know if the Barbara IV is just smaller than the V, or if it's a completely different model.  I recently bought a Cassandra I which is also made by Thought Products. I asked the same question as you are, and I got great advice. In my opinion, Thought Products looms are not for everyone because they are a bit more complicated to use than a traditional loom. I decided to buy the Cassandra because I have a 'technical thinking' mind and it turns out that I love my loom. I don't have any problems at all with it, but it's much smaller and completely different from the Barbara. If you do a search for Thought Products or the Barbara V on this site you may find more info.  You should find the suggestions that were given to me.

Doreen

WeaverDave (not verified)

Hi Annette,

I found one site that describes the Barbara IV Loom as being "complex". The site is the Spinning Weel Sleuth at http://www.spwhsl.com/handloom/  They have a "supplement" you can order with an article on that loom.  Here is what it describes . . .

Weaving on a Barbara IV Loom by Joanne Mills

The Barbara IV loom, designed and patented in 1979 by Thought Products, is very complex. Joanne Mills describes the many features and the challenges they presented to her effort to make her loom functional.

Looks very nice though.  I don't know how well it weaves, but it may be a collector's item.  It said that a patent was given for the design.

Regardless, you should check to see if they have each and every part for this loom before you buy it.  If not, then you would have to have the instruction manual that lists the parts you would need to replace.

Good luck! 

SallyE (not verified)

I don't know if you are still looking for information on this.   Feel free to contact me if you are.   I have one of these looms and can tell you about it.

Sally

 

WildPoppySarah

So I just acquired a thought products loom, but they couldn't find the manual and the way they had the brakes set up was wrong. Does anyone have photos of the brake system? Or a copy of the manual? Thanks so much!

Nakia

Hi WildPoppySarah, did you find a copy of the manual you were seekig? Which Thought Product loom do you have? I ask because I have a manual for a Barbara V Thought Product loom. If that would help you I could send you a copy of it. 

 

My very first floor loom was a 60" 10 treadle 12 shaft Barbara V. I ordered it used from a weaving store in Oregon in 2007. The trucking co. lost the box that had all the hardware, crank handles, various other parts & manual somewhere along the trip from Oregon to Texas where I live. I was given the choice to turn the boxes I did have back to the trucking co for a full refund or keep it with a refund of the shipping. I chose to keep it.

 

I didn't  have internet then so the weaving store found a lady in Illinois who was generous enouth to send me a copy of her manual and phone support to me. I am quite happy to do the same for you if it will help you.  unfortunately for my loom I could never find or build everything I needed to get her complete again. She sits in my garage in lonely pieces. 

sandra.eberhar…

I have a Barbara IV, which is quite a bit different from a V.  However, the hardware that is used is pretty standard stuff you can find in a hardware store.  Unfortunately, the manual tends to be slim. What things did you need that you couldn't find?  Mine came with some cables that worked and some that didn't; I replaced them with Texsolv to make tie up easier.

WildPoppySarah

I did get my hands on a manual for a barbara V, though I have a Barbara IV I think. I may have asked for a V by accident though. 

WildPoppySarah

Has anyone changed their tie ups to texsolv instead of the metal rods on a Barbara IV? These rods and pins are a pain in the butt. Incan't even get through a full repeat of straight treadling without a pin coming out. 

Submitted by Anonymous (not verified) on