Iv'e owned a Nilus 8 shaft 45" before and also narrower Schachts - I primarily weave on countermarch but for teaching weaving lessons want to use jack looms.  Does anyone have experience with Gilmore looms?  Have a chance to buy a 45" 8  shaft but worried about shaft floats and poor tension.  If you have owned/own one I'd love to hear from you.

 

Dawn

Comments

kerstinfroberg

Jusr curious: why do you prefer jack looms for teaching?

Dawn McCarthy

Don't get me wrong - I would rather use my CM's to teach, but having a jack loom is just what most people are used to, can be more compact and gives me an additional type of loom other than the cm. (I personally dislike larger jack looms for wider projects.)

Joanne Hall

For a while I had narrow jack looms in the studio for teaching, but students had too many skipped threads and tension problems, so I sold them and just used counterbalance and countermarch.  Students had far more success with the cb.  You can get these in narrow widths.  I had three Leclerc Fanny looms, cb, 27 inch weaving width.  I also had the Ideal looms which can be tied up cb or cm. 

A friend had a Gilmore and she liked it, but she didn't have any other looms for comparison.  When I wove on it, it took a lot of effort.

Joanne

Dawn McCarthy

Thanks Joanne, that's the problem with CM looms, once you have woven on one, everything else pales in comparison.

Dawn

 

Slipstream (not verified)

The loom that I have was the one I posted about recently not knwoing what it was originally but it now has been positively identified as a Gilmore by the factory.  It is a jack loom and it is solidly built.  The originator was a fanatic about quality (spoke with the new owner of Gilmore) to the point that all the slotted screws face in the same direction at assembly.  My loom is an antique but I uderstand that not much has changed even to the point that on my loom the warp beam crank handle was missing and it is available from Gilmore. There are records for each and every loom sold from Gilmore.  The loom is solidly built with excellent wood work joinery.  The fasteners are robust and all the parts  work well together. I'm nw to weaving but I am a mechanical engineer and a pretty fast learner.  The jacks are smooth operating and there is very little slop in the operation of the shafts, they rise and fall crisply and this loom was built in the 1930s and this loom was in a studio and used to teach on. Having asembled an antique counterbalance loom and then having worked with the jack loom I fully understand the difference in the feel and limitations of the jack loom and agree that the operation does not feel the way yours would but I believe as a teaching instrument the jack loom is more compact, easier to transport and is fully capable of allowing a student to learn a wide variety of techniques. I hope this helps a little bit. 

Best regards,

Charles 

PattiHN (not verified)

I have an 8-shaft, 32 inch Gilmore that I bought used. I believe that it originally belonged to the community college around here and it has some cosmetic issues (what looks like coffee or dye stains!) but it is in fabulous shape. It really is a solid, well-built loom. The Gilmores have a nice shuttle race so there shouldn't be any skipped threads if your students use a boat shuttle and slide it along. And the shed is reasonably large, too. Gilmore also has wonderful customer service, although I haven't yet met any yarn or fiber people who aren't nice. :) That's my two cents worth! Patti

black4sheep

I dealt with Mr. Gilmore and wove on Gilmore looms years years ago, then went back to school as a single parent and did not take the time to weave.  Went back to it, finally, as a wheelchair user, and picked up a Harrisville 22" because it came with a wheeled platform so I could spin it around to reach the back, and it was lightweight so my husband could carry it without complaint.  I had constant problems with it suddenly having something come loose, usually a connection for either a harness or a lamm or a treadle.  When I phoned Harrisville, I was told that I was the only one who ever had had such a problem.  Yes, I was using their recommended tie up accessories.

I then had double hip replacement surgery and was lucky enough to purchase a 22" 8 harness Gilmore.  I have been weaving projects of sufficient complexity as to require skeleton tieups, on purpose so as to maximize the exercise my legs get, so I am often stepping on 3 or 4 treadles at a time with my two feet.  In that time, I have never had anything let go or come unadjusted on the Gilmore, and every time I have had a question or needed advice on such things as how to make my old tensioner fit this loom, Bob, the new owner of Gilmore looms, has been more than helpful, quick with excellent advice, and always focused on how to make it work without my having to spend much money.  I think he and Judy are great, as I do Gilmore looms!

Slipstream (not verified)

I've had occasion to contact Bob regarding my little one and they keep records on just about every Gilmore ever made.  It appears as though everything is replaceable regardless of age and I learned little tidbits I never knew such as the original Mr. Gilmore was such a stickler for quality that all the screw slots line up.  If you look at the breast beam or the castle you will notice that all the slots aree in the same direction.  the reason for that was not just a whim but it was a quick reference to knwo if the loom had been tampered with. At our local Jr. College they have number of Gilmores and they all hold up well.

Regards,

Charles

eschwart (not verified)

I have experience on a variety of looms , I have been a weaver since 1977. I was just given a Gilmore 8 harness 54 "bed- I LOVE THIS LOOM. I made two adjustments that were suggested by the company. 1)turn the back beam over 2) buy the spring and install it to keep the tension when advancing warp. I thread front to back. I can easily reach and see the reed when threading. I also am able to weave with 7" of waste, which is incredible I think. I can get a shed with the back apron righ up against the heddles on the 8th harness. Honestly the only improvement I would make on this loom is to drill a hole to hold the beater (like on my mighty wolf). that is a great convienence that I would like to have. The Gilmore company is there to help and provide you with replacement parts. I cleaned this loom and removed and replaced some cushions that had turned goey black , bought replacement tie ups (they have a pin system - a little fussy but holds well and are easily changed) The RACE is a little wider than any other leclerc or schetcht , throwing the shuttle is wonderful on a wider race. Don't pass up a Gilmore.

lilyspin

I have an 8-shaft, 40" Gilmore loom. I have had no problem with shafts floating, and I do like fairly high tension. I also have a Cranbrook countermarch loom and enjoy weaving on both. I think that the Gilmore would serve well as a teaching loom.
Submitted by Dawn McCarthy on