I have a Schacht horizontal warping mill (no brake) which I have never used. Now that I'm planning a 8 1/2 yd warp  (waffle weave towels) for the inagural project on the floor loom I've just finished refurbishing, I thought it would be a great time to use it. Just thinking about doing 500 ends on the warping board makes my arm hurt ;)

Any tips, tricks, and things to keep in mind will be greatly appreciated. Pictures are even better. I understand the concept, but we all know that theory is far different than practice.

Thanks.

Comments

celtinbirks

I would appreciate any tips, too.

celtinbirks

I would appreciate any tips, too.

Joanne Hall

I show how to use a warping mill, or reel, in my new book, Learning to Warp your Loom.  As with a warping frame, divide your warp into equal sized bouts, which would be about 6 to 10 inches of your warp width.  It is not much different from using a frame.  The ideal is to have all the warp ends the same length.  So, don't let it build up too much.  On the warping board you will push the warp threads back to the frame.  On the reel, you do not wind them far from your guide string.

Do you have some specific questions?

Joanne

handspunhandwoven (not verified)

ellenspn -

Thank you! It was very helpful to see your rhythm, hand movements, and the little moves which I'm sure are second nature to you but really help me a lot. As I said, I understood the basics, it's the little details I was looking for.

I'll be studying them closely tomorrow evening, and will drag my mill down from my studio (aka the loom room). I'm sure I'll have more questions after I have a go at it.

Once again Weavolution members come through brilliantly.

handspunhandwoven (not verified)

Thank you all for the encouragement and help. I've been working with the mill, and have hit my stride with it. This is so much quicker and easier than measuring a long warp on the board. My arm and shoulder are much happier. These are my second and third warp sections on the mill (from above):

Here's a dismantled and reassembled pics of the loom I just finished refurbing. I'm really looking forward to putting this first project on and getting underway.

Michael White

Your loom looks GREAT! You did a exceptional job on refinishing this loom. I hope you enjoy years of happy weaving on the loom. Everytime you sit down to weave with your baby you will feel the pride in knowing that you gave new life to this loom.

Michael

handspunhandwoven (not verified)

Thanks Michael.The finish is now so smoooooth and the wood grain so gorgeous - it's delightful.

She is a Schacht 4Now 4Later built in 1980, so it’s understandable she needed a little TLC after 30 years of faithful service. The loom is looking happier and moving better since I refinished the front & back beams, the entire beater assembly, all the treadles, etc. Some scrubbing, sanding, and danish oil goes a long way. I still need to work on parts of the frame, but that will have to wait for warmer weather when I can put a tarp down and do the work in my studio.

Eventually I’ll buy the other 4 shafts. But first I have to sell the other floor loom sitting in my living room.

Michael White

I saw that loom hiding to the left. You could post it here on Weavolution or if you IM me I will give you a list of loom sites.

Michael 

handspunhandwoven (not verified)

The other loom in the pic is my Baby Wolf, which is not going anywhere :)

I have an extra floor loom, currently residing in the living room - a 40" 4 shaft Loomcraft with a sliding drawer bench, warping board, etc.. Unfortunately it needs a front beam and race (easily fabricated), as the lady I rescued it from had used it for acrylic with a temple, so those parts had gotten very chewed up. I'd trade it for a 4-shaft kit & a raddle for the floor loom. Typical weaver/spinner - I'd rather have new fiber toys than cash...

I was going to start threading that nifty warp I did above this evening, but my new MyTouch Slide showed up today. I have no idea how to use it, so I'm reading the manual instead.

Chickeemama

I have watched all videos I can on using a vertical warping mill with a paddle and I have to say everyone makes it look easy and fast but no one really breaks it down ( really breaks it down) using the paddle (slot and hole) they just do it so fast I can’t keep up. I really want to make the cross more Efficiently. Right now I’m all thumbs and feel like a contortionist!

I have warped using a paddle (successfully)with my mill but one of my problems is if I need to stop ( potty break or whatever) how do I secure the warp momentarily to do this without losing my tension.  

Im sorry if these questions are silly but I’m learning to weave without any help but videos and the internet. I’m rural and unable to take any classes at this point as I also care for my elderly parents ( they live across the street) 

 

sandra.eberhar…

I wrap the ends around the last peg. I don't use a paddle, but warp 4-8 ends at a time with my hand.  I usually warp ~ 25 yard warps, so I almost never get it done in one session.  Just do it and you will develop your own pattern and rhythm.  

sally orgren

...stuck across all the warp ends while you take a break.

Chickeemama

thanks for the input...I have been laying it across the pegs so will continue to do that. 

Still working on making the threading cross faster!

 

 

 

Submitted by Anonymous (not verified) on