I seem to recall someone talking about these drafts and that they can't be read in the usual way.  Does that ring any bells with anyone?

Comments

lkautio (not verified)

If you are referring to the Davison Handweaver's Pattern Book, the drafts are written for a sinking shed loom (when you press a treadle some shafts drop rather than rise).  If you weave them as is you will weave the fabric upside down from what was intended.  Beginners are generally frustrated by it not looking right - until they drop the shuttle, look up, and see the pattern on the bottom side.  To convert, just tie-up (lift) the spaces rather than the filled boxes in the tie-up.

Laurie Autio

Deanna (not verified)

I remember the first time I used that book. I had no idea that there was a difference in looms and tie-up notation. I was upset that the pattern was not working, then I noticed that the design I was expecting was on the underside of the weaving. You are just weaving it upside-down. I sometimes weave my designs upside down now if it means lifting less shafts! I have since set up a mental reminder if the tie-up has o's then it is rising, if x's it is sinking shed. (bubbles rise, anchors sink!!)

debmcclintock

Most weaving books do explain their tie up format!  The "green book" is no different.  I know I did not read the text for a LONG time but "oh, look!"  at all the info that is in the text in the front of each chapter!

By the way if you are anywhere near Wilmington, DE, the Winterthur Museum has the M. Davison original collection in their archives.  Some of us took about 3 years to help catalog and identify the weaves in the textiles which were the inspiration for the book.  It was a very interesting morph of weavers and museum curator expectations on how a cloth structure is described.  It is a beautiful collection and well worth the time to make an appointment ahead of time and request to see the collection.  Unfortunately, I checked and it is not on line digitally BUT it is there on the east coast!

Joanne Hall

Remember that all drafts are written to be used on any type of loom.  You just need to know how to read a draft and know what type of loom you have.  For most drafts, a mark in the tie-up draft means that you will see the weft there.  The unmarked squares will represent the warp.  Recently, the way a draft is written has changed since we now have more looms with lots of shafts.  So, when there are many shafts, you will see numbers in the drafts rather than marks.

Joanne

Jeannie (not verified)

I'm out in the Rockies, but will be near Delaware in the Spring.  Thanks for the tip.

 

 

Jeannie (not verified)

And yes, I should have 'read the manual'~ 

debmcclintock

I am posting a link to some photos in My Project of some of the textiles in the Davison collection at Winterthur near Wilmington Delaware.  They are exquisite and I know folks will enjoy the slide show.  I took some photos thru my loupe to give you an idea of the EPI.  Here is my blurb from the project  Enjoy and go look at the slide show!

These are samples from the Marguerite Porter Davison collection, "Davison Collection", which is housed at Winterthur.  Most are singles linen, I've included some of the loupe photos so you can count the ends per inch.  Every time I see this collection I fall in love with it again.  It can be seen by appointment only arranged ahead of time with the Textile Curator.  Weavers should make an effort to request to see the Pennsylvania German handtowels as they are most representative of the textiles presented in the "Green Book", A Handweaver's Pattern Book.  It is absolutely magical to see the singles linens at 50 epi or more reflect the light and see how beautiful the weaves can be combined.  The "Green Book" is presented in 4 shaft weavers.  The Collection shows how far one can take a cloth with more shafts. The project module forced me to enter shaft #, I can assure you these samples took more than 4 shafts!  I also included some natural dye plain weave towels that can inspire some nice color combos.  Enjoy  Deb Mc

Submitted by Anonymous (not verified) on