I have a very fine single-ply linen yarn that I wanted to try as warp to see if I could manage it.  I've been experimenting with it using a singles hemp for weft, and made 4 "counter mats", which are heavier than dishtowels and are used to drain dishes, veggies, whatever.

After weaving the first one with a light beat I decided that a mat should be more substantial so I wove the last three with a much heavier beat.  After wet-finishing them, here is the result -- loosely-woven one is on the right.

I've been collecting articles and books about collapse weave as it is on my list of things to get into big time, so this unexpected result is most welcome!

Bonnie.

Comments

laurafry

What fun!  There's magic in the water.......  :)

Cheers,

Laura

Ellen (not verified)

Who would have thought that the hemp would draw together like that??!!! Weaving keeps being full of surprises.

ruthmacgregor (not verified)

That's wonderful, Bonnie!  I've been collecting articles on collapse weave, too -- but haven't yet taken the plunge.  Your "counter mats" are a great demonstration of one of the things I've read:  the yarns need room to move during wet-finishing if the collapse is to happen.

Very cool!

Ruth

Evelyn (not verified)

That's amazing.  The hemp must really shrink or is it a combination of the structure and ppi?   What were the yarn weights? 

Bonnie Datta (not verified)

Thanks for the comments everyone.

The linen warp is labeled 14/1 -- in fact it is that large cone I got from you Evelyn!

The hemp weft is on tubes and isn't labeled, but it is about twice as thick as the black and it is also a singles.  My beat on the crinkly textile was about half the ppi as on the smooth ones -- about 16 ppi compared to about 30 ppi.

The threading is a straight draw with an empty dent every 4 ends.  The warp is sett at 24 epi.  The treadling is 2/2 twill.

Evelyn (not verified)

That is the Louet Euroflax 14/1.  That is great that it was fine for a warp.

 

Submitted by Anonymous (not verified) on