I'm afraid I'll have a "duh" moment when I get an answer to this elementary question, but here goes.  I'm looking at a tie-up for tabby treadles used in Summer & Winter that looks like 1,2 & 3,4.    Isn't tabby woven on opposites?  

Comments

laurafry

Plain weave tie ups are dependant upon the weave structure and how it is threaded.  Therefore plain weave tie ups are not always 1+3 and 2+4.

For example, Bronson lace plain weave is shaft 1 tied up to one treadle and all the other shafts tied up to the second treadle.    Summer and Winter is threaded 1,P,2,P so if you tie up 1+3 and 2+4, you won't get plain weave.  You'll only get plain weave if you tie up 1+2 to one treadle and the P shafts to the second treadle.  If you do a drawdown (or use free weaving software) it will very quickly show you that the plain weave tie up is whatever is required to make plain weave.

Cheers,

Laura

kerstinfroberg

not exactly about plain weave, but: I wrote a blog post about a diamond twill and various ways of threading/tie-up/treadling to get the same result. It can be found here.

The same principle can be applied to all weave structures.

lkautio (not verified)

Plain weave is over one, under one.  Look at your threading to see which shaft(s) you need to raise to lift every other thread.  You are right that the two sheds are always on opposites (what is in one is not in the other and all threaded shafts are used).  Often odds vs evens will make plain weave, but as Laura pointed out, it depends on the structure and the chosen threading for that structure.

Laurie Autio

patternwhisperer (not verified)

What does P mean when you say 1,P,2,P ?

kerstinfroberg

P = "pattern"

typically a 2-block summer-and-winter is threaded (block 1) 1,3,2,3, (block 2) 1,4,2,4. (Next pattern block becomes 1,5,2,5 and so on)

emmaybee (not verified)

Aha- Thanks for clarifying!  I've done a lot of overshot this year and I think I was still in that mode....

Submitted by Anonymous (not verified) on