I've made one of the temples I saw in use in Assam -- every home weaver uses one for her fine cotton or silk pieces.

Here is how it looks when finished:

I used bamboo sticks sold for gardening, and my sticks are 30" long -- this stretcher will work for weavings between 24" and 28" wide.

To insert the pins in the ends, I cut each stick about 1/2" past a knob, then I used a drill bit to remove the pith.  I put a stick pin with a large head into the hollow and then added enough matchsticks/toothpicks to fill it up.  Then I wrapped an elastic band around many times and finally sealed it up with some strapping tape.

At the center of each stick I scrunched the bamboo with pliers, then pounded a shoe tack through both pieces and finally tied them together with wool warp yarn going in and around all four angles and tying securely.

I used wool warp yarn to wrap several figure 8's on each side of the center cross (with one pin end in each pair of sticks).  Tie an overhand knot to finish, so that these yarn bundles are continuous and can easilly self-adjust -- these will be used to create the tension.

I don't have an appropriately sized web in progress at the moment so the best I can do to illustrate the device in use is to stick it into this towel.  You insert the pins, then move the yarn bundles out toward the edges.  This flattens the center angle and creates tension.

It is so typical of cottage industry weavers in places like Assam to have devised low-cost, make-it-yourself solutions!!

Bonnie.

 

Comments

Joanne Hall

Thanks Bonnie.  Do they put the temple on top of the fabric or underneath like in Guatemala?

Joanne

francorios (not verified)

Bonnie, thank you for posting this. I love low tech tools!

Have a joyful day!

Bonnie Datta (not verified)

Thanks for writing -- I'm glad this info was useful.

Deb -- thanks for the link -- those were the kind I saw in Bhutan also, and there the temple was hanging under the web as you have illustrated.  Aren't those pins a bit of a hazard when they stick up?  Or maybe you put a piece of cork on them?

Joanne -- in Assam the temple is put onto the top of the web.

Bonnie.

 

debmcclintock

Bonnie, what type of fabric did you see the temples used on?

 In Laos, where they do inlay brocade and have alot of small butterflies of silk the temple is on the bottom out of the way of the inlay.  In Cambodia and Thailand where they do alot of weft ikat they put the temples on the top of the fabric where it doesn't matter (pins are easier to manage definitely!).  I've used it both ways depending on the weave on my loom.  You do have to be careful with the pins.  I make sure I push them down enough before I secure them so that they can hold the textile taut enough but are not long enough to nail me.  I'm guilty of not posting the loom pictures from those countries.  I'll try harder to dig thru my cd's.....trying to save memory on a computer means one has to dig thru cd's for archive photos!

Bonnie Datta (not verified)

Hi Deb.  Temples like this were used on all kinds of weaving -- some with overshot-style patterning, others with discontinuous inlay and butterflies.  In all cases the temple was on the top surface of the weaving.

Bonnie.

 

Submitted by Anonymous (not verified) on