I just LOVE weaving on my little 4H counterbalance loom - so quiet, so easy to operate.  So I'm wondering....is there such a thing as an 8H counterbalance?  If so, who makes it?  If not, why not?

P.S. I do have an 8H Macomber, which is very nice, but it's loud & heavy to operate.

Comments

steve104c (not verified)

It depends on what make and kind of raising device is lifting the harnesses. Do you have pullies or a dowel rod? Can you post pictures of this loom? If you already have a counterbalance,  it sounds like it would be possible...............Steve

Sara von Tresckow

If your loom is deep enough (I'd say over 32"), you can just add shafts. 8 will work relatively well - you may need to substitute pulleys and horses for dowel rods, and make some new treadles, but most counterbalance looms are simple enough to expand.

You can also add shafts to any larger existing CB loom, and many of the Swedish looms sold in previous decades were CB and had 4-8 shafts.

peg.cherre (not verified)

Thank you so much for the info!  Although I've posted a picture of my sweet, little loom, I wasn't really thinking I could adapt it (or wanted to).  And from your comments, I likely can't - it's only 24" from inside of front beam to inside of back beam.  It was handmade, own design, I believe, I'm guessing in the 40s.  Texsolv raises harnesses.  I only have a 26" weaving width, and would love to have 36".  (My Mac only has 32".)

So I should keep my eyes open for an old Swedish CB, eh?  If I found the right one, I'd sell the Mac.

Submitted by Anonymous (not verified) on