Hello, was just gifted this loom but I dont know anything about it.  No identifying label for manufacture.  Would love to learn to use it but dont know where to start, can anyone give me an idea of who made it and when,  thank you, 

Comments

claudia (not verified)

It looks like a nice 4 shaft table loom.  Can you give us a few more pictures.  You can find help with adding pictures to your forum posts in the Help section here.  

If you are new to weaving, please consider looking through the List of Teachers in the Resources section of Weavolution and use the search at the top of the page to find one in your part of the world or you can try to find one on the SWA list here.  

If you want to try to teach yourself to weave, many have done so with Debbie Chandler's book Learning to Weave as a first start.  

Glad you found Weavolution.

Claudia, co-founder Weavolution

madaket (not verified)

thank you for the help, I will definately pick up a copy of the recommended book, here are a few more photos.

Caroline (not verified)

A nice little loom - its needs a spot of TLC but it will give you years of service after that! :-) !

By the looks of it you are missing the ratchet and pawl that holds the front beam under tension; thats not a problem although it might seem so at the moment. If you check the DIY Looms and tools group here: http://weavolution.com/group/diy-looms-tools you will find a few discussions on how to make your own - its basically a round notched knob that fits over the end of the front /cloth beam so you can wind the cloth on and store it under tension. The reed/beater looks a bit rusty as well. It may need replacing, but I would be tempted to give it a good soak in coca cola (a la Mythbusters) first - you have nothing to lose. Just don't use anything that will corrode the steel or pit it like rust kill, and please don't take a wire brush to it! That snags the threads and can rip your woven project to pieces. If you do have to replace it, its not expensive and there are several weaving stores advertised on here that stock reeds.

It also looks as if someone was in the process of putting on a new warp. The yarn may be old and fragile so its really not worth trying to salvage it, as it could fall to pieces on you.

As Claudia said, the Debbie Chandler book Learning to Weave will get you started  and is often found second hand - sometimes under her maiden name of Debbie Redding.

That a nice little gift there, and should give you many hours of happy weaving!

 

madaket (not verified)

Thank you for your advice Caroline, I found the book under Debbie's maiden name very cheap and looked for the rachet and pawl, I think it is there just not visable in the pics. I will soak the reed beater and see how it comes out, glad you said not to use a wire brush as I was considering just that!. Can the wood be cleaned up with lemon oil or some other natural oil and then let dry or should I just just give it a quick sand to take down any rough edges and leave it be? peace,erin

Caroline (not verified)

Hi Erin, Oil would certainly bring the wood back, but before you get it out, please check how the joints are made. Some oils can remove glue from joints very efficiently - furniture oil does just that because its a hydrocarbon. Guess how I found out, grrrrr!

A gentle wash down might be the way to go first, to get any surface dirt off, then a light rub down with wire wool followed by a light sand. You could then use a cooking oil like sunflower or olive for the first coat - this will raise any rough areas that need to be sanded back, and they are often used as carrier oils for the more precious natural ones. I like using natural beeswax as a finish, but there are many beautiful wood oils and waxes available, perfumed or not. Check out what the spindle makers and spinning-wheel builders recommend to bring out the beauty of the woods they use.

It'll be interesting to see how you go with the reed - there are some who say they cannot ever be bought back from the dead, and others who say they can - its going to depend on how badly rusted and pitted the reed is. If you need to get another ratchet and pawl, most of the major loom builders sell spare parts, and you will find them at store like Halcyon Yarns, Woolgatherers, and many more of Weavo's advertisers.

Its good you found the Chandler/Redding book! When you have any questions, and you will, ask away, because most weavers here have read it at some stage and have a copy in their library. This is the start of a wonderful adventure, and even a magnificent obsession!

Submitted by Anonymous (not verified) on