I am trying to restore a Tools of the Trade table loom that was part of a college weaving program and, as such, was not treated all that gently. I have begun taking it apart, sanding and refinishing, but need some help at this point. I am hoping that someone has one of these looms and can post some photos and answer some hardware questions.
Even before I took the loom partially apart, there were some nuts and bolts missing, and some of the bolts/screws appear to have been replaced without matching them to the originals. If possible, can anyone who owns one of these looms tell me if all the bolts extending to the inside are the same length? Also, which bolts are inserted with the heads to the outside of the loom and which to the inside? Which have wing nuts and which have regular nuts?
On this loom, which has apparently been taken apart and put back together at least once, the pieces that allow the front and back beam to fold are installed on the inside of the castle for the front beam and the outside of the castle for the back beam? Is this how it is supposed to be? I found a photo on Daryl's blog (I think) that shows the front beam arrangement and that matches how it is on this loom, but cant see the back beam.
I thought this was going to be easy. HAH I will attach some photos of what I have here. ETA: could only post one photo.
Thanks for any help you can provide.
Gail
Comments