Thinking of getting or even making a sectional beam for my Glimakra Standard. Have started warping, and it is a real mess working from the warp board. Was told the tention is not good, and hard to measure ends when you use a sectional beam.Please tell me something. Anyone out there using a sectional beam and making rag rugs? I do have a tention box w/ counter. Another question. The counter, what does it measure in? Inches?Feet?Meters? Its from Leclerc, used.Thanks.................Steve.

Comments

Sara von Tresckow

 Why not get a good warping mill - 2.5 to 4 yards around? It is more economical and when you do finer fabrics you don't need all the spools, tensioner, etc.

You mention working from the warp board - are you choke tying your warp and chaining it prior to warping with it?  It is very difficult, if not impossible to warp without tangles unless you do.

steve104c (not verified)

Sara, You say to use a warping mill. Can you tell me the steps in loading the mill ,and going from the mill to the warp beam? I can easily make a warping mill, but is it going to make warping easier. I'm really having a difficult time warping with what I have pulled of the warp board. I will conquer this beast but don't want to have to fight the warp monster again.  What is the easiest and best form of warping? What do you use? Like I said , I'm not going to let this stop me from weaving but I am really frustrated. Even if I have to start over with a new warp, I will become a weaver of fine rag rugs. An artist of the cloth. A victor over the evil warped monster. Over dramatic, uh! Will ,you get how I'm feeling right now. Please help me cross this hurddle.Thanks in advance for any help you can give.............Steve

Joanne Hall

Hi Steve,

You just need to learn how.  If you cannot take a class, invest in the DVD Dress your loom the Swedish way.  It is made for your loom and is probably less than the cost of taking a class.  It shows you step by step what to do.

Joanne

Sara von Tresckow

Steve,

I'll second Joanne. Get the DVD.

Submitted by Anonymous (not verified) on