I've woven numerous scarves and shawls out of bamboo in huck.  As the web passes over the breast beam, the picks separate.  On prior warps, the separation has closed up with wet finishing.  But, this time, there's still an area (about every 6"), where the ppi is obviously different.  I rewashed the scarves in hot water and put them in the dryer on high heat, but the flaws are still there. 

My theory is that the open sett of huck contributes to this situation.  But did I maybe tighten the warp too much this time?  Any ideas on how to redeem these scarves so I can sell them, or what I can do to not have these unwanted degrees of separation in the first place? 

 

Thanks -

Kate

Comments

Joanne Hall

We don't know what loom you are using or the tightness of the weave.   A more rounded breast beam might help.  If you can see through the web, you might want to have a closer warp sett or more wefts per inch.  Count the wefts you are now getting and compare it to the earlier scarf you wove.

Perhaps you need to have a tighter sett to keep the structure together.  To do that, you may want to use a temple to make it easier to weave.  You can read about temples on our weaving FAQ:

http://glimakrausa.com/faq.html

Click on weaving, temples.

Joanne

Sara von Tresckow

 Try advancing more frequently.

If you try to weave too much after retightening the tension, the first picks will weave at less warp tension that those 2 or more inches up the cloth.

 

laurafry

If you are having streaks every 6" I think Sara has probably diagnosed one of your major problems.  People tend to advance too close to the breast beam and then weave too close to the reed.  Most looms (not all, but many) have an area about 2" centred between the breast beam and reed that is a 'sweet' spot and where weaving should be taking place.

You don't say what grist of yarn you are using or your set.  Bamboo is fairly slippery and can be set more tightly than cotton and still retain a lovely drape.  I suspect it is a combination of the two - too open a set and weaving too close to the breast beam/reed and you may need to consider making changes in both of these areas.

Cheers,

Laura

kfsuko (not verified)

It's 10/2 bamboo, and I sett it at 20 epi.  I did the sett calculation  with wraps per inch and ends per repeat - which I've found to be a great starting place to determine sett - and it said 19 epi.  Think I'll advance the warp more often and not tighten the warp quite so much - 

 

Thanks all -

 


laurafry

Personally I would have used 24 for a 10/2 grist yarn, especially a slippery one in a lace weave.

Cheers,

Laura

kfsuko (not verified)

I've been debating between 22 and 24 myself, so I think that just clinched 24 epi. 

lkautio (not verified)

The other question is whether you used a plain weave selvage.  3/4-1" of plain weave at the edges can stabilize the lace so that you can weave it more open than usual.  However, as Sara said, the regularity of the streaking suggests it is happening when you advance the warp.  The tighter sett will help, but won't necessarily fix an advancing problem.

Laurie Autio

kfsuko (not verified)

I set the scarf at 24 epi and advanced the warp far more frequently - and the scarf is beautiful.  I learned again (which suggests I didn't really learn it the first time) the importance of advancing the loom.  And I realized that there isn't just one sett for a particular weave structure in a particular yarn with a particular item use. 

 

Thanks for all your help and suggestions!  bamboo scarf

Submitted by Anonymous (not verified) on