I am going to be weaving with tencel for the first time. I have 8/2. I am planning on doing a shawl. I was thinking of doing a lace weave. What weave structures  have people tried with  tencel?

Comments

Deborah Heyman (not verified)

I too have just  recently tried 8/2 tencel for the first time---and really love it. I used it for weft on an M's and O's, with an 8/2 cotton warp, and the contrast between the 2 textures was nice---one slightly shiny and the other matte. I am now using it for both warp and weft on a Crackle. I washed the weaving on the warm setting in my machine, and then dried in the dryer, without problem. Ironing it afterwards brings out the glossiness. It has a great drapiness--even when combined with the cotton.

laurafry

You can do pretty much anything you want with Tencel.  It's cellulose, shiny, has good drape after wet finishing.  It likes humidity, so will behave better if the relative humidity is higher.  If you live somewhere arid, like I do, run a humidifier.

Cheers,

Laura

sally orgren

Sett it tighter than you would think!

It has an incredible drape, even when sett on the tighter side. I have woven all kinds of structures with it, but one of my first garments is now disintegrating at the button holes because it was sett too loosely. (it was 10/2 sett at 28 epi in an 8 shaft twill, and in retrospect, I should have sett it at 30-36.) 

Sally

Karren K. Brito

Maybe the problem was in the construction of the buttonholes not the sett. Increasing the sett from 28 to 36 would make the cloth 29% heavier, quite a noticable change.   Proper reinforcing makes buttonholes possible in some loosely woven cloth. Selecting the construction techniques appropriate for the cloth sometimes requires sampling too.  Anyhow it is a possibility you might consider.

Tencel and bamboo are both rayons- slippery and slinky.  Weak when wet.

bolivian warmi

Wondering if anyone has tried it in a warp faced textile or is that just plain silly?

WeaveThings (not verified)

Hi there - I just recently used tencel for the first time for a Christmas gift for my mother - a 4 shaft huck lace. It was easy fast and fun. You can see a bit more about it at my blog here: http://weavethings.blogspot.com/2010/01/awaken.html

The tencel scarf is the second image down - the purplish one...

debmcclintock

 I've found that tencel doesn't like to be crowded in the reed (as in 4 per dent), it sorta frays a bit like linen, once you get the right balance (as in 2 per dent)  between sett and tencel it weaves beautifully.  Deb Mc

Lauries (not verified)

thank you all for the hints. I was thinking of setting it at 30 at least. I also thought of crackle but not having done crackle before I didn't know if I wanted to try two new things in the same project.  As to your comment, Laura Fry I live in Minnesota. It is very humid in the summer so it sounds like than would be a good time to try this.

Deborah Heyman (not verified)

I could be totally wrong, but a sett of 30 sounds too tight to me for an 8/2 tencel. I used a sett of 18 for a crackle pattern. Does anyone else have thoughts about that, especially since Lauries is doing a lace weave?

laurafry

Depends on how firm a fabric one wants.  And how much lace.  The more lace, the tighter the set can be.  I know that some people recommend setting lace 'as open as you dare' but to me density of the cloth is determined by the function of the textile, not the weave structure.

Cheers,

Laura

lkautio (not verified)

Other factors for lace setts include the slipperiness of the yarn, the elasticity of the yarn, the reflectivity of the yarn, and the degree of openness (how far the holes open) desired. Although related, these are different from hand or weight. They affect the definition of the block and its visibility.  Another factor for the sett is the size of the blocks used.  You can sett a smaller block (one with 3 thread floats vs one with  5 or more thread floats) more widely (lower sett) before it gets sleazy.  You can sett laces at anything from nearly sleazy to as tight as upholstery where they become textured cloths without holes.  For 8/2 tencel in a shawl I'd try 22-24 as a start and adjust after weaving and washing a good size sample.

Laurie Autio

lkautio (not verified)

I've seen it in warp-faced hangings and weft-faced tapestry.  It works and can be beautiful, though not as hard wearing as some other options.

Laurie Autio

KMR Handwoven (not verified)

I weave lots of scarves using 8/2 tencel from Webs. I use a huck lace structure sett at 24 EPI. I agree with Laura, that tencel is sett closer than you might think. I first tried huck lace at 20 EPI but found it way to "sleezy". When off the loom scarf may seem "stiff", but after finishing (gentle machine wash, scarf in a net bag, then tumble dry in dryer) scarf is soft, drapey and wonderful!

Tencel yarn is really easy to work with and the colors are beautiful! have fun!

Kathie

Lauries (not verified)

When I weave lace Huck is my choice. I usually like five threads but if I sett it at 24 I'll  do three. Thanks for the suggestions.

BonnieI (not verified)

Laverne, I have woven many warps of Tencel for warp-emphasis cloth. I have some on my loom now for turned taquete.

I prefer a closer sett for Tencel than for cotton of the same size because the cotton changes more with wet-finishing.

Lauries (not verified)

Thanks again for the tips. I found some 10/2 tencel in my stash so I need to figure the sett for that too. I am trying to work out a Huck lace scarf from the book Best of weavers Huck Lace. Its a 6 shaft piece. I don't usually do scarves but I figured this would be a good piece to do for my first tencel project.

LDWYERLMT

Hi everyone! I am a novice weaver - 3 projects off the loom..LOL Now planning a scarf using 8/2 black cotton as warp, and a variegated (tashkent - beet, pecan, grape, teal) with and a sienna in 8/2 tencel. Attempting overshot leaves, a pattern found in Anne Dixon's The Handweaver's Pattern Directory. Never having used a variegated in the weft before, wondering if this is going to be a big mess....I plan to do a sample, but am hoping for the best, as I really like the variegated tencel. A shimmery color changing effect is what I'm hoping. Any advice, yay or nay? Sett - planning on 24epi for the warp in my 12 dent reed. Thanks!

sally orgren

I have mixed the cotton and tencel to good results. A bit less drape than 100% tencel is all.

I have found much success with variegated tencel, and JOY (Just Our Yarns) is a particular favorite. DO sample! There are two risks I can think of:

1) The variegation may not show the pattern as well as a solid with more contrast to the warp.

2) Sampling will show you if the repeat of the variegation will work or not in the weft direction. Using a variegated weft wise, the risk is the repeat might give you an odd section, where the colors pool together in an odd way when viewing the fabric at a distance. (So it can look like a mistake.) 

Even if the sample comes out ok, to continue to check if this is happening, stand way back from your loom and check the weaving from time-to-time. Or even stand on your loom bench to look down at if from that distance. Taking a photo with a digital camera is also a good technique for viewing your fabric differently, and finding threading or treadling errors, or an odd aberration like this.

If the color is clustering in an odd way, stop weaving. Wind a bobbin, then a second bobbin. Use the second bobbin where you stopped weaving to break the sequence, so the color won't pool.

Now that you know what to look for, I'll bet it will come out just fine. Have fun. The Dixon book is wonderful!

LDWYERLMT

Thanks, Sally! I love the extra bobbin idea! Would never have thought of that. Just so you are aware...- from Just Our Yarns... "Effective December 18, 2012, we are discontinuing internet sales -- but will continue our sales activities at shows." I have purchased from KYB and plan to perhaps try the EugeneTextileCenter(Eugenetextilecenter.com)as their price on the one color tencel is $5.00 less per 1/2 lb. cone. Unfortunately, all they have are the 1/2 lb. cones, but still...a good price. ($10.40 vs. $15.50) This project should be interesting....for many reasons. have never had 500 heddles on my 22" loom. We'll see what happens..LOL. The variegation in the yarn will also prove interesting. I used a variegated yarn (Vanna's woods Print)in a scarf warp-my last project which was a 2/2 twill. The weft was a Sensations Enchantment black metallic. Outside of missing 2 spots in the reed, it came out beautifully. Will post once I get it started. Awaiting extra heddles and bobbins. :)

sally orgren

I usually keep about 100 heddles per shaft, on any loom. And I HATE moving heddles, so I just figure out how to space them out between active warps—even on non-used shafts if I need to go the full width in the castle.

I suspect if you are seeking more heddles for your loom, your tendency might be toward becoming a structure-junkie, like me!

 

D-Stitchins Studio

I have just finished a sample project of a pattern in 48epi using 10/2 cotton.  I was testing the pattern to see if I liked it before using it on a proposed Jacket (suit-type jacket).  I would like to try tencel or a wool/silk blend, but am finding that not a lot of yarns are recommended for this tight of a sett.  I haven't used tencel yet so would like some opinions on what others have found works well.

Diane

Bonnie Inouye (not verified)

Sett is always determined by a combination of things:

The size of the yarn

The fiber

The weave structure- to be specific, it depends on the number of interlacements per repeat. An interlacement is a place where the weft passes over or under the warp. Plain weave has the most interlacements and it needs a rather open sett to achieve a balanced weave.

The effect you want- if you desire a weft-faced cloth, then open the sett. If you want to see more of the warp, use a more dense sett.

The type of yarn is just one factor. If you look for projects that others have done with a given yarn, you will find a wide variety of setts because each project is different.

Bonnie Inouye

ladytj1754

I found an older posting regarding the sett for tencel. I have been told to use a sett of 30 epi For 2/2 twill. I have made a sample of my fabric and I don't particularly care for the result. I'm thinking of spacing it out to 24 epi to get more weft effect with SOME sheen from the tencel. My weft is a super fine 'kettle tweed' made up of 60% merino, 20% baby llama, 10% bamboo and 10% donegal tweed. In my sample, my ppi Came out to about 18 By not beating too hard. Thus, my question.  The fabric seems rather unbalanced. This will be made into a sweater top from a Handwoven issue called 'Oragami top' Handwoven,March,  1995. 

Any advice is appreciated!

Submitted by Anonymous (not verified) on