I recently purchased a schacht floor loom. It came warped with a rug warp I think set at 6 epi.  in a plain weave.  I would like to not waste this warp so figured I could have my daughter weave a rug with it using fleece so that it will be think and soft.  Do you think this is possible and how wide should I cut the strips of polyester fleece.  This is the fleece that one can buy at joann fabrics etc for scarves or hats etc.  Do you think this set will work. It appears to be just a cotton string.  Do you think the set should be further apart.  I really just dont want to waste this warp and thought this might be a way to have my daughter try her hand at simple weaving as well.  Thanks for any help.  Diane

Comments

Su Butler

HI Diane.....6 epi should work well for a rug.  The width you cut your strips will depend on the density you desire in the finished rug.  However, as a starting point, I would try 1" wide.  That will pack well and create a thick, cushy rug. 

Su :-)

horsofcors (not verified)

 Thank you. Im looking forward to this.  Hopefully it will work.  An easy way to use up this warp and also get my daughter excited about weaving too.  Thanks. Diane

TinaHilton (not verified)

I've woven several rugs out of polar fleece selvedges.  They make lovely rugs.  Pets love them, but unfortunately they attract pet hair like a magnet.  People love them too.

horsofcors (not verified)

 Thanks, for your post.  How wide would the strips be?  What was the warp epi on what reed ?  I currently have 6 epi on a 12 reed so it is in every other slot.  Thanks. Diane

TinaHilton (not verified)

My strips were about 1" wide.  The sett was 6 epi working ends, but I doubled through the heddles to make the warp stronger.  That's what I do for a wider spaced 8/4 cotton warp but I know a lot of people thread singly so it should still be fine.  I used a 12 dent reed, threading every other dent, just like you.

I did all in plain weave, but this one was in a mix of diamond twill and plain weave.  I cut the polar fleece selvedges in two lengthwise and one strip is always thicker than the other.  I used the thicker one for the twill and the thinner one for the plain weave.  Here's a picture of that one.  I really like how it turned out.

 

Submitted by Anonymous (not verified) on