I'm not really sure where to post this question, so I'll post it in here for now.

I am thinking about doing a painted warp project. I'm using a 100% rayon for the warp. I have twined the warp and it should be ready to dye...except I haven't cleaned it yet.

I did a painted warp project in a weaving class I took a few semesters ago in school. The way we scoured was putting each warp bout in a leg of pantyhose and tied the top and then put them in the washing machine. We used synthropol and soda ash as the scouring agents. I don't really have access to those chemicals because I'm trying to do this at home using stuff I have around the house. I'm sure this is possible but I don't know what chemicals to use. I know that Joy dishsoap contains synthorpol and I was thinking I could use that in place of the synth. but I'm not sure what to do about the soda ash. Baking soda is not the same chemical is it? Would I use washing soda? Any information would be much appreciated. :)

Thanks,
JoAnna

Comments

fiberfan (not verified)

 What dye are you using?  You may need soda ash for the dye as well.

tien (not verified)

I don't think you need to scour your warp in the washing machine!  In fact I've never heard of doing that before.  The scouring I've done has typically just been soaking in water with detergent (I use Dawn), then rinsing gently out afterwards.  With cotton, especially unmercerized cotton, you might have to scour by simmering on the stove with a detergent and washing soda, because of the waxy coating that cotton naturally has, but rayon is a regenerated fiber so that shouldn't be necessary.

Baking soda is not the same as soda ash.  Washing soda is sodium carbonate (I think) and could be used along with a detergent for scouring if you need to scour on the stove (see above).

All that said, if you are dyeing rayon you will need soda ash anyway to do the fiber-reactive dyeing, so you might just want to order some.  Dharma Trading Company http://www.dharmatrading.com on the West Coast or Pro Chemical and Dye http://www.prochemical.com on the East Coast can get it to you pretty speedily.

Hope that helps!

Tien

tien (not verified)

...it just occurred to me that you might not be dyeing with fiber-reactive dyes, but with RIT or something similar.  In that case you wouldn't need soda ash, but I'd recommend using fiber-reactive dyes instead as they are considerably more washfast/lightfast than the RIT dyes.

Tien

JoAnnaWeaves (not verified)

Thanks for the tips. I think I will need to wash the yarn before dyeing. A weaver friend of mine used this same yarn (6-ply rayon from Webs) and she said when she scoured before dyeing it, the yarn looked like it was sitting in lake water from all the dirt that came out.
I will probably try the dish soap (Dawn) and washing soda. Thanks for the quick replies. I will probably be using fiber reactive dyes and end up having to get soda ash anyway. But I wanted to see what my options were.

weaversouth (not verified)

I would suggest ALWAYS using Orvus paste to wash.  It rinses out with no residue.  Other detergents, including the supposedly "mild" detergents are anything BUT.  And "Woolite" and the like are the worst!

that's all from m corner.

Nancy C.

Sara von Tresckow

 Before you spend lots of time on this and get unattractive results, study the web instructions ts both Dharma and Pro Chemical, know EXACTLY what type of dye you'll be using and EXACTLY the mix of help agents to use with that dye. Just making substitutions is simply not a good use of your time and effort.

Good dye results and permanence come from knowing the yarn, the dye, and the method - and then doing it the approved and tried and true way.

Su Butler

HI Joanna....you are wise to scour the rayon prior to dyeing it. You will achieve excellent results with yarn that does not have spinning oils and dirt present.  Soda ash is pretty easy to find at Pool supply stores.  Maybe another couple of weeks and the big box stores will have it as well.......it is usually sold as a PH enhancing product for swimming pools.  Check the label to make sure it is 100% sodium carbonate with no additives.  It will be a fine white powder.  You can usually find this stuff at Wal-Mart or other big box stores or your local pool supply or hardware store.  A very large container is usually about $5.00. 

I think scouring the rayon in the stocking is a great way to get it really clean and prepared for dyeing.  The washing machine can get out lots of stuff that soaking might leave behind.  If you do scour in the washer, the soda ash you add will be rinsed out in the cleaning cycle so you will have to add it back in when you dye the yarns.  Dawn works well if you don't have synthrapol lying around.  I usually add about a cup of soda ash to a full wash load when scouring. 

Go to the Prochemical and Dye website to get excellent instructions on both scouring and dyeing rayon with Procion MX fiber reactive dyes.  I believe Dharma has good instructions too.   

I teach workshops in warp painting and the scouring instructions I send to students are very similar to those you have followed.  You should get excellent results.  Happy dyeing!

Su :-)

 

 

 

 

JoAnnaWeaves (not verified)

Su,
Thank you so much for the helpful info. I had no idea what else soda ash would be used for. I have checked Lowe's in the past to see if they carried it, but since I didn't know its "proper" use, I didn't know what section to look in. I was able to find it without any trouble knowing that it was used as a pH increaser in pools.

As for the scouring in a stocking idea, I have to give credit to my instructor for teaching it to me. She teaches all her students to scour in the washing machine because it gets the fabric/yarn cleaner than hand washing (just like you said) and if you put it in the stocking, it allows the water and chemicals to go through the stocking without getting your warp all tangled and messy. She also has us twine all of our warp bundles if we are planning on dyeing them because, again, it keeps the yarns in order.

I have not personally used Procion MX dyes on this particular rayon (I have used it on cottons, silks, silk blends, etc) but the same friend that advised me to wash it before dyeing (because of the whole lake water thing) dyed some warps and they turned out beautifully. The rayon takes the dye wonderfully. I am looking forward to doing a painted warp soon! :)

JoAnna

louiseinoz

Joanna

Don't use washing soda, it's not the same thing and of course I found out the hard way.  I was trying to overdye some old variegated cotton - white brown yellow and pink - and ended up with a most unattractive flesh colour with washing soda and Drimarene dyes.  Since re- dying it with soda ash and the same dyes I've now got some very usable yarn

 

Louiseinoz

Submitted by Anonymous (not verified) on