I've been roaming around in the Marguerite Davison book and having a great time.  But since I barely know what I'm doing (tho it's getting better . . .), I always avoid the patterns that say "use tabby."  When, where, how?!

For example (for those who have the Davison book, revised edition), on page 22 (Goose Eye, Chevron or Pointed Herringbone), patterns IX and X say "use tabby." Between pattern treadlings?  I really don't get it.  I tried doing that last night but it didn't seem right. Whereas other patterns on the page incorporate tabby treadling as part of the treadling draft, these two don't.

Other strangenesses: it feels very strange to pack eight weft threads into a single shed but that is what pattern X on page 22 seems to suggest.

Any help will be appreciated!

 

Lisa Marty

 

P.s.  Tried uploading photo of treadling draft, but don't know if it worked or if i did it right!

Comments

lkautio (not verified)

Hi Lisa,

When it says "use tabby" they mean that plain weave alternates with the pattern shots.  If, for example,

your pattern picks are   12, 12, 23, 34, 34, 34, 14, 12

and the tabbies (plain weave sheds) are   a=13,   b=24

then you treadle:

a,12,b,12,a,23,b,34,a,34,b,34,a,14,b,12

Sometimes it looks better with one tabby starting than the other.

Usually the tabby picks are thin yarn, the same color and the same size or finer than the warp, and the pattern picks are a thread that is 2-4x the thickness of the warp in a contrasting color(s).  So, you usually use two shuttles.  The patterns are usually woven square, which means in this case that 8 weft picks (4 pattern and 4 tabby) fit into the same space as 4 warp ends.

Also, Davison was written for sinking shed jack looms so if the draft calls for 1+2, that means that 1+2 sink.  If you raise 1+2 it will work, but the pattern shown in the book will be on the BACK of the fabric.  Many a weaver has found their inability to reproduce the patterns very frustrating, only to drop the shuttle, look up, and see them on the back of the cloth!

Laurie Autio

lisamarty (not verified)

Ahhhh . . . .  very helpful, Laurie!!!!

Thanks for this very clear and detailed explanation!

Can't wait to give it a try. 

I have a jack loom, so at least I don't have to worry about that.

 

Thanks so much!!!

 

Lisa

 

 

Michael White

Lisa, yes you do, If you have a "new" jack loom 99% have a raising shed.  If you do not made any corrections to your tie-up all your patterns will be as Laurie said shown correctly on the underside of your cloth. 

Michael

lisamarty (not verified)

Oh gosh  . . . Michael, thank you for paying attention to my inattention.  My loom was built in 1938.  But, yes, it's a rising shed type. All this time my fronts have been backs and yet I was so pleased!  Having looked at what I did last night, I can see that you're right.  Amazing. Seems like the simplest thing to do is nothing.  But if I want to look at the front while weaving, I'm still not clear how to proceed.  When the draft calls for 1 + 2, raise 3 + 4 instead?????

Lisa

debmcclintock

just to make you feel better, more than 20 years ago when I started weaving I followed your footsteps in the greenbook and did not pick up on the "use tabby" sentence.  I couldn't figure out why my cloth was so spongey......duh.....welcome in!  Deb Mc 

debmcclintock

Here's a link to one of the overshot drafts here in weavolution....www.weavolution.com/node/3592 

you'll see that only the float picks are on the draft, look in the top left hand corner, see those last two columns that are blank in the treadling?  But they are tabby, it is assumed that you treadle tabby in between each float shot.  To save space it is not drawn in.

Now, they are treadling 1 and 4 first, that means that 1 and 4 come up in a rising shed loom if you have the treadles tied to that combination.  This means that the weft goes OVER 2 and 3 and UNDER 1 and 4

your next shot is a tabby 13

the next treadling is 3 and 4, so the 3 and 4 comes up in a rising shed and your weft goes over 1 2 and under 3 and 4

your next shot is a tabby 24

so....hope that helps, it also helps to have a mirror by your loom so you can look at your pattern on the bottom part of your cloth until the light bulb goes off on the relationship between how you tie up and how your cloth looks!

Michael White

Lisa, everyone does it!. Each book, if it is MPD's or Mary Black's book has a notation some where in it explaining the drafts. IN MPD's book it is in the front. That said, in MPB's drafts you use the "BLANKS" not the dark areas to tie up your threadles. If 2 & 3 are dark, use 1 & 4, or 23, 14 use 14, 23. I am certain one of the more advance weavers can explain this better. I just build, repair and make loom  parts now a days. With some electronic work on the side. Right now I am off to bake tropical chocolate chip cookies. (Dried Pineapple, Papaya, Mango, Coconut, chocolate chips and almond pieces).

Take care,

Michael 

lkautio (not verified)

Lisa,  In a sinking shed loom the warp angles up and when you press a treadle the shafts drop.  In a rising shed loom, the warp is relatively flat and when you press a treadle the shafts rise. 

To change the tie-up from sinking shed to rising shed use the opposite of what is shown in Davison.  If Davison has 1+2 marked (as sinking), raise 3+4.  If she has 2+3, raise 1+4.  So, whatever is not marked, is raised. This will give you exactly the same shed (a bit of a brain bender until you you think about the geometry).

Deb is absolutely right, it is important to think about what the loom is doing when you make an interlacement rather than just going by the numbers.  It's the most basic component of weaving, and surprisingly, the one piece that a lot of (if not most) people miss.  Once you get it, you can go anywhere! 

Laurie Autio

lisamarty (not verified)

Deb, Michael, Laurie,

Thanks for getting into the nitty gritty with me. Very helpful.  And yes, I guess I'll have to start thinking about what my loom is doing!

 

Thanks to all!

 

Lisa

Michael White

Lisa, how that you have all that figured out, it is time to look at floating salvages. You can find lots of information on this subject by typing in "floating salvages" in the search line on the top right. You will have information on why, when and how to make floating salvages.

Michael

 Will Lisa, I take that back. I typed in floating salvages and did not get what I was looking for. If you will run down the pages here on Weaving (hitting page down on your keyboard helps) you will find discussions on this subject.

BonnieI (not verified)

Lisa,  you could look at the drafts in my article about overshot on the free online weaving magazine, WeaveZine.

http://weavezine.com/content/flowing-curves-part-1-overshot-and-weaving-overshot

Drafts in modern publications are made with weaving software, so it is much easier to show the tabby picks and the relative sizes and colors of weft yarns. We are so luck to have this tool!

You do not need a floating selvage for overshot. It is easier to just add a tiny border to the threading- make it 1-2-3-4 on one side and 4-3-2-1 or 1-2-3-4 on the other side, or whatever is needed to include each shaft once at each end.  That way you will always catch one of the edge threads as you weave the pattern picks. (Sometimes you have to change direction in order to catch them, but it does work.) The tabby picks are always going to catch the edges.

Bonnie Inouye

 

 

 

claudia (not verified)

Hi Lisa and Michael,'ve s

To search for past discussion in the forums, use the navigation list on the left side of the page and click on "Search forums: and then type in selvedge or floating selfvedge or selvage.  I've seen it spelled both ways, not sure which is correct.  Last I read, in the Southern hemisphere it's spelled selvage and in the Northern hemisphere it"s selvege or vice versa : )

Claudia

lisamarty (not verified)

Because I like twil so much, believe it or not, I have already ventured into floating selvages -- or at least my version of them.  I've been tying the floating warps onto the back apron rod along with leftmost and rightmost bundles of threaded warp threads.  Don't know if that's the right way but so far it has worked with no broken selvages. Somewhere I read something about hanging weighted floaters off the back of the loom.  Is this better for some reason?

 

Also, re using a temple (homemade or otherwise) why doesn't it damage the fabric? Seems like sharp tines at the selvages would create noticeable "pulls," or "swells."  I'm going to try the "paper clip" method to see for myself.

 

Lisa

Sara von Tresckow

 Be cautious when trying to weight selvage threads more tightly than the rest of the warp. In textile textbooks, there are discussions about the difficulty of getting the takeup on the edges correctly. Correctly means that they are neither tighter or looser than the rest of the fabric. If you make a wide piece and hang it, these tight floating selvages may actually cause the center of the fabric to hang in a dip in the middle.

suzyhok (not verified)

YUMMY!  Are you willing to share the recipe for those tropical chocolate chip cookies? They sound AMAZING!

:)Suzy 

lisamarty (not verified)

Bonnie,

Thanks for directing me to your article in WeaveZine.  A lot to absorb.  I have a four-hour plane ride ahead of me tomorrow and plan to take it with me.  (Lots of reading time!)  Glad to know about WeaveZine, too.  Hadn't yet stumbled into it.   

 

Lisa

Michael White

Suzy,

I will post the recipe in my corner of the world.

Michael

suzyhok (not verified)

 Thanks Michael... can't wait to try it!

:)Suzy

Ellenss

Hi!  I am a newish weaver and am absolutely delighted with the next steps in weaving book .... And daily, I have 'one of those' kind of questions...

So here is mine today.   

Overshot...page 95 in Patti Graver's book

I've gotten the lovely 10/2 pearled on the loom, threaded, and tied....but when I go to weave it...

Which tabby treading do I do?  

I've tried adding two additional tie ups to the draft for plain weave -1&3 and 2&4 but the warp will not spread well and create the plain weave.  Then I tried all the other combinations and still can't get the warp to spread out for plan weave.  Lots of gaps in the warp.  I've tried waste yarn, TP, but can't get the warp to be weaveable...

I have a size 8 reed so I did the 2-3 slaying....but that didn't work... So I tried 3-3.  Still no go...

i have a Weavemaster counterbalance floor loom.

I finally have the time off to actually weave but am stuck....so any help is greatly appreciated.

Sincerely, ellen

sandra.eberhar…

I'm not sure what you mean by not being able to spread the warp out for plain weave.  Could you show us some pictures of what the problem is?  Usually you sley the reed for the sett for your yarn and fabric; 10/2 is 24-32 epi according to the Weaver's Companion. 

Joanne Hall

Yes, photos will help.  And, how much have you woven?  How many threads did you put into one tie.  The more threads in a tie, the more it takes to spread it out.   It may take 2 inches of weaving with a fine thread.  It is not as helpful to weave with very thick threads.  With T paper and other thick things, it uses more warp thread to spread out the warp.

There is a FAQ on the  Glimakra USA website which answers a lot of beginners questions.  That might be a good place to read about getting a warp started. 

Joanne

Submitted by Anonymous (not verified) on