I have a few questions? I hope all feel free to give their opinions!

 

Glimakra ideal verses mighty wolf.

 

If you could only have one which would you choose and why?

 

I though that I wanted a wolf, because of the folding option. But after sitting at one I found out that I could not weave long at one without my back hurting. Does anyone else find this to be a problem. They are very helpful and are going to order the wolf leg extension for me to try. However, I not sure 2 or 3 inches will be enough. Do any of you use the leg extension on your wolf loom? The most comfortable loom that I set at in their studio was and old German loom. It measured 46" from floor to waist beam. The wolf measures 29 1/2 " from floor to waist beam.  My rug loom measures 33" and a Glimakra Ideal measures 36".  I usually stand or perch half on a stool when using my rug loom. There is no way to stand at a wolf loom.  Do any of you stand at your glimakra's?

 

I want to thank you all in advance for your feedback.

Liza

Comments

Sara von Tresckow

 I'd take the Glimakra Ideal. Or the Oxaback Lilla (prejudiced as I sell them, but they are also really nice looms).

The small footprint countermarche looms (both the Ideal and Lilla qualify) are slightly smaller versions of the larger standard looms. Some of the advantages are:

1. Counter shed has firm floor, needs no shuttle race, allows either firm or delicate beat, makes fine household and clothing fabrics REALLY well, will also hold tension for the occasional rug, though for a rag rug weaver, the standard model would be recommended.

2. Ease of warping - the beater lifts off, the breast beam lifts off, the knee beam lifts out, and you have nothing in the way of winding on (the raddle clamps easily to the back, the lease sticks - in both cases the nice Swedish beveled ones). When ready to thread the heddles, the shaft height can be easily adjusted using the shaft holders so you thread without bending or twisting. Reed hangs from the castle for easy sleying.

3. Overhead beater - not only does a wonderful job of beating firmly, this type of beater allows much finer control of delicate fabrics where only a whisper of a beat is needed. Allows the weaver to develop a wonderful rhythm.

4. Seats the weaver comfortably - knee beam keeps cloth deep under the loom. Bench is adjustable in height. 

5. Ease of treadling. There are no shafts to lift - you just tip the balance. The treadles are mounted close together in the center of the loom to get the treadling action as similar as possible between the one on the left, the one on the right and those in the middle. Since you only push them with the toes of front part of the foot - "ankle biting" need not be a problem. I routinely move 8 shafts simply by tipping my ankle.

6. Quiet - the only sounds are of wooden parts gently rising and falling.

OK, CM looms are all I weave on - but owning 5 means that I'm really delighted to weave on them.

weaveblah (not verified)

It's just as you say;  I have a (second-hand) Glimåkra Ideal, and despite it being badly neglected by a previous owner, it continues to operate, and weave, with all the designed technological elegance you describe.  I don't think I could ever part with it.

weaversouth (not verified)

Have a look at the "Baby Mac" looms.  I have three of these, one new and two I picked up cheaply off ebay.  One of the old ones is 50 years old and, although it needs refinishing just from an aesthetic point of view, it works GREAT!  

It sounds from your post that you might be a bit short of stature?  If that's the problem, the Baby Macs are a great height,   I am pretty tall, and even I find them comfortable, with the right-sized bench.  You can work one-on-one very effectively with them if you have any modifications you might want.  They're great guys to work with.  I have Macombers and AVL's in my studio and don't know which I could do without!

(The two older ones are rehab projects!  I don't know whether, once done, I will keep them, give one away, or sell them both.  I tend to want to hang on to them, they're so great!  The new one is the "home loom" that lives in my study.)

Anyway, there is now an online presence for Macomber:http://macomberloomsandme.blogspot.com/  BOY was that a long time coming (-;

whichever one you get, it's good to get with the seller/builder and talk things over.   That's one of the things I like about my loom-builders:  I can get input etc from them any time I need it.  Leclerc are a little harder to talk to and I have never had occasion to talk with Schacht, so I don't know (I used to have a Schacht...loved it! It was a little light-weight for rugs, though)  glimakra, of course, are overseas, but make great looms.

 

Best of luck!  Nancy C.

claudia (not verified)

Hi Nancy,

As for talking to the loom builders, I have called Schacht and found them extremely helpful and although Glimakra is manufactured overseas, Joanne Hall who is located in Montana is a fantastic resource for all things Glimakra and all things weaving.  I've enjoyed and learned a lot from Joanne both on the phone and email.  And here's a little secret about Glimakra, they have a toll free number which is a nice bennie if you have  a land line (although a lot of those are disappearing).

Claudia

Leatherweaver (not verified)

Thanks everyone! Actually I'm not short, more of average with very long legs that make certain loom styles not work well for me. I have never seen the mac looms. Thanks for mentioning them I will take a look at them. I am going to try to get to a friend's house this week that has a Glimakra. Her's is a (second-hand) Glimåkra, too. I'm armed with measurement and sizes to compare it with the new Ideals. I like the that they are quieter  as I will be weaving in the evenings after tucking everyone in. Quiet would also be a big plus with my husband. He is ok with me putting a loom upstairs,but not thrilled about it......

All the dealers that I have talked too have been wonderful! But really wished that I could find a good deal on a (second-hand) Glimåkra Ideal. lol I might have be saving $ for awhile before I can afford what I want. : )

I've been studying pattern drafts. My favorites are 8 or 10 shafts.

Moving forward to catch my dream,

Liza

cindyo (not verified)

I have both a Baby Wolf and a Glimakra Standard.  I love them both, but if I could only have one (how sad!) I would choose the Glimakra.  It is more versatile in that it can handle both fine projects and the heavy beating required for rep weave and rugs.  I also find it more comfortable for threading as you can get right iniside the loom.  The overhead beater is easier on my aging shoulders, and the loom is definitely quiet. 

I wish I could say that the tie-up is a breeze, but I have only had the Glimakra for a couple of months.  I've tied it up three times and it looks like it's going to take a few more tries before that becomes easy.

On the glimakrausa.com website they advertise used looms for sale.  Maybe you will find what you are looking for.

 

claudia (not verified)

Don't forget to check the For Sale or Trade forum here on Weavolution.  There is a lovely looking counterbalance there right now, http://www.weavolution.com/node/6699

Claudia

Michael White

Liza, here is the listing of guilds in PA. You can also look here under resources or groups to find PA weavers. fiberarts.org/directories/guilds/Pennsylvania   The Mac is a great loom, but the threadles are attached from the back so you push down on the front of the threadles. Having long legs means you will be doing a lot of knee bending.I would check with the guilds and look at the lasted copy of "Handwoven" to see if there is a weaving shop close by. You could also contact the Manning in East Berlin, PA   http://www.the-mannings.com/ They sell a 1/2 doz brand of looms. You could go there and try them out.

Have fun

Michael

 

 

 

 

 

  

fantasticfelter (not verified)

 i have the height extenders on my wolf loom. i also sit up very high so i am looking down and my thighs are almost touching the breast beam. this helps a lot. you are talking apples and oranges here. the idea glimakra is fantastic and will do rugs, the wolf will not, but they each have there plus's and minus's. if you are a new weaver the jack looms can be easier to tie up treadles etc. but i love the over head beater and quietness of the conterbalance countermarche looms. so if you want to do rugs, need  a quiet loom, and do not mind time under the loom and a longer learning curve at first get the glimakra. if you are impatient  to  tie up, crunched for room, need to move the loom from different room time to time, and do not mind a louder action of the lambs  coming down while weaving the wolf is for you . both looms are excelent so it is your desision. 

oh and also you can expand the glimakra to 8 or 10 shafts,{ if the mighty wolf is a 4 shaft only you can not expand it.{4 now 4 later you can expand it.}

i have a baby wolf and a large countermarch rug loom so some day you may want both, so choose what you want to weave now, and decide on it that way.

Leatherweaver (not verified)

 

Thanks everyone!

I know of three weaving guilds within driving distance from me. I have friends in all three guilds. And I have been a member off and on in two of the guilds. Lovely people in all of them and very helpful.

My biggest problem is I want one loom to do it all ; )

I'm going to get to try a wolf with the leg extensions and also a friends glimakra. Hopefully this will help me in making my decision. I've also seen a lot about the avl home loom lately. I know very little about them. I only have room for one loom so I want to make the best choice. I want to be using it the rest of my life. I've been studying drafts here

http://www.handweaving.net/Home.aspxfta

My favorites are almost always the ones with 8 to ten shafts. So I want to buy a loom that will work for those types of patterns.

The glimakra ideal can be order in a 10 shaft ,but the treadles are narrower. Has anyone woven on one of these. Do you find the narrower treadles a problem?

Reality will probably hit, and I will have to buy a used loom within my price range. But I just trying to learn all I can before I buy.

Liza

Ellen (not verified)

Hi Lisa,

I only just saw this thread now, so maybe this is way too late. But I'll give you my experience anyway. I have a Glimakra 10 shaft 10 treadle loom, and I would never want another. It is perfect for both fine and heavy duty weaving, comfortable. and a very very pleasant companion!

Feel free to come back if there is anything else you want to ask.

Ellen

jordanj (not verified)

Ellen,

I am researching the purchase of a used Ideal and saw this post.... Can you expand a bit on the suitability of this loom for "heavy duty" weaving? Can you weave a wool rug on this loom?

Thanks for your input!

Jennifer

kerstinfroberg

I'm not Ellen, and I might be prejudiced, being a Swede.

However, in my experience there is no Swedish floor loom (that I knoiw of) that is not suitable for weaving rugs.
In fact - the first time I came to the Americas (Convergence '90), I was astounded as to how "flimsy" most Am looms looked - to me, that is... And, of course, the beauty of a "standard Swedish" with an overhead beater is that it is suitable for everything, from the sheerest linen drapes (don't beat, just push) to the sturdiest rugs (beat, and then *beat*).

- any loom will "walk" when you beat hard, but there is help for that: get a pair (rather two pairs) od Stadig loom feet. I believe Joanne of glimakrausa.com sells them.

(no affiliation - but an avid user of Stadig loom feet since at least 20 years...)

Kerstin in Sweden

jordanj (not verified)

Kerstin,

Thanks for your input! I was looking at the Stadig loom feet, wondering if they really worked. Guess I have my answer there! I will give Joanne a call this week!

Jennifer 

Ellen (not verified)

Hi again,

sorry for not answering before. As so often I have been offline for a while. I see that in the meantime Kerstin has given you the right answers already, and I can only second her opinion! I have woven silk shawls and floor rugs on mine, and it is wonderful for both :-)

Submitted by Anonymous (not verified) on