Scarfs! Fringe or no fringe? Or would you like to try something different? how about silk ribbon and beads, a beaded fringe, tassels from the corners, tassels w/beads, the tried and true, tied fringe or twisted fringe with or with out beads. A lace fringe done on or off the loom. When was the last time you did tatting, crochet, bobbin lace? How about a novelty yarn fringe stiched into the hem. You could get really fancy an purchase or make any of the hundreds of pillow fringes. Just remember if you add beads or "charms" etc. you will have to hand wash your scarf.

Have fun, be different, be adventurous. But remember what Claudia wants, pictures, pictures, and more color pictures.

Michael 

Comments

debmcclintock

 Hi Michael, may I post a link to your question to the Scarf Finishes Group.  I created that group so that 6 months from now we could go to a group which had ideas in one place.  Folks have been generous with ideas and photos there. I've tried to keep the subject lines in an index order so we can find stuff.  We can always use more!  Here is the link:

https://weavolution.com/group/scarf-borders-finishes

It definitely won't hurt my feelings if folks want to chat about it here in the general weaving forum!

regards

Deb

hlf (not verified)

I've just purchased a fringe twister.  First, twisted fringe, then, the world!  I'll take pictures when I've finished weaving this learning scarf.

 

-heather f.

francorios (not verified)

 

This first scarf has straight fringe with some "macrame" style knot treatment. The strands between knots are not very evenly spaced and I think its because I used dowels to gauge the distance. Then I realized the knots were not always on the same side of the dowel so the string distance was changing each time. Next time I'll use a flat narrow piece of card stock as a spacer for the knots.

 

This is my first "twisted fringe" scarf. It came out wonderful. I would like to get the knots at the same length each time but I guess that takes practice. I also like using light strands versus dark strands for the contrast design feature.

This scarf was woven on a frame loom as continuous warp to have a finished selvedge. I used chop sticks as beams for each end and stretched that on a frame loom.

http://francosfiberadventure.blogspot.com/2009/05/weaving-on-longer-chopstick-loom.html

The weft spacing is uneven, the edges are uneven, and the ends are not terribly pretty. The weave was more warp faced than plain weave. But it showed me that I can make a scarf on a frame loom without all the loom waste. Now I have to learn how to make the next one pretty. Next time I'll use wire from a coat hanger instead of chopsticks to keep the end loops smaller.

This was made with acrylic yarn from the Vanna White products, with tan yarn for warp and variegated tan/blue for weft.

This could also be done on a backstrap loom.

Looking forward to seeing other scarf finishes.

Have a good day!

 

 

zinniz (not verified)

If one can judge by the last season of Project Runway, I'd say that the intricate macramé knotted fringes may be in style.  

I really like twisted fringe, however, so I'll probably stick with that.  I pin my scarves to a gridded board and use pins to make sure the knots end up the same length.  I also use a fringe twister and count how many times I twist to make sure all the fringes are the same.  It's time consuming, but a finish that I'm confident will last.

Michael White

Hi Deb, I can not keep up with all the groups. yes, I would be happy for you to post to the Scarf Finishes Group. In fact it was not a question but just different ways of finishing scarves.

Michael 

debmcclintock

Heather, if you join the Scarf finish group, I think this is the right link here https://weavolution.com/forum/weaving/scarf-finishes-11528 , there are a couple of threads in that group that might help you, there was some great discussion on how to use the twister and other alternatives.

Here are a couple of threads for you to check out in the group:

That extra little  twist  www.weavolution.com/node/6146 

Fringe twisting tool  www.weavolution.com/node/6318

My learning from the discussion was that you twist in one direction so many times appropriate for your yarn and then you put all the ends in one hook and twist in the opposite direction for half as many times.  The twist holds nicely.

regards  Deb

debmcclintock

Thank Michael, since the "search" function is still under development and the "tag" function is still a mystery to me I started the Scarf Finish group in the hopes that we could have a central place to collect tips.  I always try to ask permission before posting a link.  Sometimes I miss stuff but hopefully other folks will create links within other groups OR just post directly to the Scarf finish group (although the finish techniques could be used elsewhere besides scarves!)

ps, I learn alot from your postings on the diy group, thank you for sharing  Deb 

Michael White

Hi Deb, Is that Hollyhocks in the background of your picture. Nice web site. You are doing some very nice complex weaves. Which loom are you using? With Claudia wanting pictures I would think Weavolution will run out of storrage if they squirreled away everything. I try and remove the items I sold after a time. I am gladed you learned something from by posting, Claudia has a writeup I did on on loom care which will be posted when time and space permit.

Tomorrow I am off to the Atlanta Thread Co store to get Cheryl a body double, to bad it is not anatomy correct (g)

u'll have a very merry Christmas,

Michael

TinaHilton (not verified)

When I twist or braid fringe, I tie loose knots at the end just to hold things in place.  Then I go back and tighten the knots, trying to get the fringe even.  But, don't forget to tighten the knots!  I twisted fringe on a blanket that was a wedding present for my nephew and forgot that step.  It went into the washer and several of the knots came undone.  Luckily there wasn't too much damage and I just retwisted.  It was mercerized cotton, so there was some fraying, but not as much damage as it would have been in chenille.

lisamarty (not verified)

I am new to weaving.  With advice from this Web site as to beat and sett, my weaving has improved a lot in recent weeks. I gave a plain weave alpaca scarf to my dad for Christmas.  He seemed to really like it but doesn't like fringe.  I've been reading about different ways to finish a scarf -- hemming, etc.  -- but am wary of cutting the warp threads w/o a clear plan.  In its current state, the scarf is tied off with simple overhand knots.

How to proceed from there to a clean, fringeless, unlumpy edge? THe various edge stitches I've seen illustrated in books don't seem like they would lead to a nice looking edge or would secure the cut warps.

Sorry if this has already been covered elsewhere on Weavolution, but I was unable to locate the thread.

 

Thanks.

 

Lisa Marty

claudia (not verified)

Hi Lisa,

My boyfriend was the same. He loved the alpaca scarf but hated the fringe. I chickened out and suggested he give it a try. I cut them to about 1" and he has gotten used to it. See if Dad will try it.

The only other thing I would consider doing is to sew a finished edge with some grosgrain ribbon. I would use the sewing machine and sew the ribbon on the edge, turn the edge of the ribbon under and machine sew it on the other side. That way you would end up with a very narrow finished grosgrain edge.

The other option is to twist the existing fringe and see if he likes that any better.

Claudia

Michael White

Lisa Marty, you could do plain weave with light weight  weft yarn on the ends of the scarf and then do a flat rolled hem to finish off the scarf. You could also work the fringe back into the scarf. 

Michael

Lisa, this is Cheryl, Are you trying to save the scarf you have done or is this for future projects?  the completed scarf could be hemstitched which is secure and would eliminate the knots, if that is the objection.  You could also (and this is a big maybe, depending on how much fringe you have left) undo the knots and do a twisted fringe which looks completely different and may not be as objectionable as a fluffly fringe..  If you don't want knots on the end of the twists, they can be wrapped to secure with matching yarn.  Otherwise, some type of trim, like the suggestion of grosgrain ribbon, or a narrow rolled hem if it is not a bulky fabric, are about the best ideas I can think of. 

good luck,

Cheryl

lisamarty (not verified)

Michael, Cheryl, Claudia,

These are all very good ideas even if I'm not quite sure how to achieve them.  This is to "save my dad's Christmas scarf," (already off the loom and gifted) but it will surely help to plan for future projects.  My dad is a "manly man" who finds even twisted fringe too girly.  Claudia's boyfriend is apparently fringe-averse, too.

I like Michael's idea of lightweight end-weft/flat-rolled hem for future projects.  As for working the fringe back into the scarf (I've seen this somewhere in an illustration), do the ends blend nicely into the weave?  And will they stay put or wander? I'm sure it depends on the material and so many variables.

Some form of hemming seems like the best approach here, but I can't imagine how a rolled or turned-under edge isn't going to make a noticeable and unpleasing thickening or bulk at the ends of the scarf. 

 

Lisa

francorios (not verified)

Instead of trying to make a thin hem thinking it won't be noticed, I've been told to make a wider hem and it will lay flatter.

I'm thinking of trying that trick.

Have a good day!

claudia (not verified)

Lisa,

The sewn end is hard to envision if you're not familiar with it. I vote for Cheryl's idea of weaving the fringe back in. I would use a tapestry, blunt end needle and thread the needle with one or two fringe pieces at a time and weave the back into the scarf. Then, to be certain they don't migrate out again, I would hand stitch, using the same yarn as you used for weft, a blanket stitch or a simple hemstitch along the now straight edge of the scarf. That should work for dad.

Does that sound more feasible?

Claudia

lisamarty (not verified)

Claudia,

This is an excellent approach! I'll try weaving the fringe back into the scarf and handstitching the edge.  If that doesn't seem right, I'll try plan B (thanks, francorious!): a wider hem.  A weaver-friend suggested also  (counter-intuitive though it may be), a fatter hem may be less obtrusive than a thinner.

Thanks to all!

 

Lisa

BonnieI (not verified)

 

 

If one face of the scarf looks nice with a hem, but the other face seems like the back, where you can see the fabric joined along the hem area, then consider adding a decorative stitch along that part of the hem. A scarf should not have a front and back side, generally.  It is not a very wide piece so it takes just a little time to stitch over that hem line. I use a yarn included in the scarf.

Some of my scarves are woven in structures that also allow double cloth. A double weave ending can be neater than a hem. I weave two layers of cloth, either separate or joined at the edges like a tube.  Make sure this part is not too short. I stitch the ends on the sewing machine or serger. Those ends are turned towards each other and hand stitched together.  The example below is echo weave, the third scarf on a warp. The first two are in my article in Handwoven, January 2008.

lisamarty (not verified)

Thanks, Bonnie.  These are very elegant solutions.  I'll try to find your article in Handwoven.  For some reason I had thought double weave was limited to tabby.  Am I wrong about that?

 

Lisa

kerstinfroberg

Double weave can be done in any structure. The only requirement is that you have enough shafts for the one structure + the other structure. Thus: for two layers of plain weave 2 + 2 shafts; for one layer of 2/2 twill plus one layer of plain weave 4 + 2; two layers of 5-shaft satin 5 + 5 shafts and so on.

Have fun!

Kerstin

Alison (not verified)

Wow - I love Bonnie's idea of the double weave ending.  So my example is going to sound pretty common place.

For Jason's scarf (Zephyr in a rosepath pattern), I needed a manly man but elegant look.  Full twisted fringes just didn't fit in.  So after using the buttonhole stitch on both sides and washing, I cut the fringe to about 3/4" length.  It suited the scarf perfectly and since he is going to dry clean it from here on out, I'm not much concerned about fraying.

Hmm...do I really need to finished my current project, or can I go play with double weave finishes?

Alison

debmcclintock

Bonnie, thank you so much for the idea!  awesome, truly a duh, of course moment!  Deb 

lisamarty (not verified)

Ah . . . so my four-shaft loom can only produce double weave in tabby. 

Now I see why I'll one day wish for more shafts!

 

Thanks for clarifying . . .

 

Lisa

Submitted by Michael White on